HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 9639.1-2008 PDF English


Search result: GB/T 9639.1-2008 English: PDF (GB/T9639.1-2008)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 9639.1-2008English140 Add to Cart 0-9 seconds. Auto-delivery. Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods Valid
GB/T 9639-1988English199 Add to Cart 2 days Plastics-Film and sheeting-Determination of impact resistance--Free falling dart method Obsolete
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 9639.1-2008     Related standards: GB/T 9639.1-2008

PDF Preview: GB/T 9639.1-2008


GB/T 9639.1-2008: PDF in English (GBT 9639.1-2008)

GB/T 9639.1-2008 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.080.01 G 31 GB/T 9639.1-2008 / ISO 7765-1:1988 Replacing GB/T 9639-1988 Plastics Film and Sheeting - Determination of Impact Resistance by the Free-falling Dart Method - Part 1: Staircase Method (ISO 7765-1:1988, IDT) ISSUED ON: AUGUST 19, 2008 IMPLEMENTED ON: MAY 1, 2009 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3  1 Scope ... 5  2 Normative References ... 5  3 Significance ... 6  4 Definitions ... 6  5 Apparatus ... 7  6 Test Specimens ... 10  7 Conditioning and Testing Atmospheres ... 10  8 Procedure ... 10  9 Calculation ... 12  10 Test report ... 14  Foreword GB/T 9639 Plastics Film and Sheeting - Determination of Impact Resistance by the Free-falling Dart Method is divided into two parts: ---Part 1: Staircase Method; ---Part 2: Instrumented Puncture Test. This is Part 1 of GB/T 9639, which corresponds to the international standard ISO 7765- 1:1988 Plastics Film and Sheeting - Determination of Impact Resistance by the Free- falling Dart Method - Part 1: Staircase Methods. This Part is equivalent to the international standard ISO 7765-1:1988 Plastics Film and Sheeting - Determination of Impact Resistance by the Free-falling Dart Method - Part 1: Staircase Methods. The technical content is identical, with only a few editorial modifications. This Part serves as a replacement of GB/T 9639-1988 Plastics-film and Sheeting - Determination of Impact Resistance - Free Falling Dart Method. In comparison with GB/T 9639-1988, this Part has the following main changes: ---“Part 1: Staircase Method” is added to the title; ---“Foreword” is added; ---Method A and Method B are added to the “Scope” (see 1.2 and 1.3); ---“GB/T 20220-2006 Plastics - Film and Sheeting - Determination of Average Thickness of a Sample, and Average Thickness and Yield of a Roll, by Gravimetric Techniques (gravimetric thickness) (ISO 4591:1992, IDT)” and “GB/T 6672-2001 Plastics Film and Sheeting - Determination of Thickness by Mechanical Scanning (idt ISO 4593:1993)” are added to Chapter 2; ---Chapter 3 “Significance” is added; ---“The working pressure of the clamps shall be not less than 300 kPa” in 5.1 is modified into “The clamps shall be provided with suitable means of maintaining sufficient contact to hold the test specimen firmly in place during the test”; “Rubber-like gaskets must be affixed to the contact surface of the ring clamp and the test specimen” in 5.1.1 is modified into “Rubber-like gaskets may be affixed to the specimen contact surfaces of both clamps to provide a cushion to minimize thickness variation effects”. 5.1.2 and 5.4 are added. The sequence of the clauses is adjusted. ---Chapter 7 “Conditioning and Testing Atmospheres” is added. Plastics Film and Sheeting - Determination of Impact Resistance by the Free-falling Dart Method - Part 1: Staircase Method 1 Scope 1.1 This Part of GB/T 9639 specifies methods for the determination of the energy that causes plastics film and sheet less than 1 mm in thickness to fail under specified conditions of impact of a free-falling dart from a specified height that would result in failure of 50% of the specimens tested. 1.2 Two methods of test are described. 1.2.1 Method A employs a dart with a 38 mm ± 1 mm diameter hemispherical head dropped from a height of 0.66 m ± 0.01 m. This method may be used for materials whose impact resistance requires masses of about 0.05 kg to about 2 kg to fracture them. 1.2.2 Method B employs a dart with a 50 mm ± 1 mm diameter hemispherical head dropped from a height of 1.50 m ± 0. 01 m. Its range of applicability is from about 0.3 kg to about 2 kg. 1.3 The measurement technique is the staircase method. A uniform missile mass increment is employed during testing and the missile weight is decreased or increased by the uniform increment after test of each specimen, depending upon the result (failure or no failure) observed for the specimen. 2 Normative References Through the reference in this Part of GB/T 9639, the clauses of the following documents become clauses of this Part. In terms of references with a specified date, all the subsequent modification sheets (excluding the corrected content) or revised versions are not applicable to this Part. However, the various parties that reach an agreement in accordance with this Part are encouraged to explore the possibility of adopting the latest version of these documents. In terms of references without a specified date, the latest version is applicable to this Part. GB/T 2918-1998 Plastics - Standard Atmospheres for Conditioning and Testing (idt ISO 291:1997) GB/T 6672-2001 Plastics Film and Sheeting - Determination of Thickness by ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.