GB/T 845-1985 (GB/T845-1985)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 845-1985 | English | 80 |
Add to Cart
|
0--3 minutes. Auto-delivery.
|
Cross recessed pan head tapping screws
| Obsolete |
GB/T 845-1985: PDF in English (GBT 845-1985) GB 845-85
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
UDC 621.382.216.5.082.6
Replacing GB 845-76
Cross recessed pan head tapping screws
十字槽盘头自攻螺钉
ISSUED ON. AUGUST 1, 1985
IMPLEMENTED ON. JUNE 1, 1986
Issued by. National Bureau of Standards
Table of Contents
1 Introduction ... 3
2 Normative references ... 3
3 Size ... 4
4 Technical conditions ... 7
5 Marking ... 7
Additional information... 7
Cross recessed pan head tapping screws
1 Introduction
This Standard specifies the cross recessed pan head tapping screw of which
the thread size is ST 2.2 ~ ST 9.5.
This Standard equivalently uses an International Standard ISO 7049-1983
Cross recessed pan head tapping screws.
2 Normative references
GB 5280-85, Tapping screws thread
GB 3098.5-85, Fasteners - Mechanical properties - Tapping screws
GB 3103.1-82, Tolerances for fasteners-Bolts, screws, studs and nuts
GB 944.1-85, Cross recesses for screws
GB 5267-85, Electroplated coatings on threaded fasteners
GB 90-85, Acceptance inspection, marking and packaging of fasteners
...... (Above excerpt was released on 2017-03-06, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.) Source: https://www.chinesestandard.net/PDF.aspx/GBT845-1985
|