GB/T 7702.3-2008 PDF in English
GB/T 7702.3-2008 (GB/T7702.3-2008, GBT 7702.3-2008, GBT7702.3-2008)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 7702.3-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Test method for granular activated carbon from coal -- Determination of hardness
| Valid |
| GB/T 7702.3-1997 | English | 199 |
Add to Cart
|
2 days
|
Standard test method for granular activated carbon from coal--Determination of hardness
| Obsolete |
| GB/T 7702.3-1987 | English | RFQ |
ASK
|
3 days
|
Standard test method for hardness of granular activated carbon from coal
| Obsolete |
Standards related to (historical): GB/T 7702.3-2008
PDF Preview
GB/T 7702.3-2008: PDF in English (GBT 7702.3-2008) GB/T 7702.3-2008
GB
ICS 75.160.10
D 24
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing GB/T 7702.3-1997
Test Method for Granular Activated Carbon from
Coal - Determination of Hardness
ISSUED ON. NOVEMBER 20, 2008
IMPLEMENTED ON. MAY 1, 2009
Jointly Issued by. General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ);
Standardization Administration (SAC) of the People's
Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Principle ... 5
3 Instruments and Equipment ... 5
4 Sample Preparation ... 6
5 Determination Procedure ... 7
6 Result Calculation ... 7
7 Precision ... 7
8 Test Report ... 8
Foreword
GB/T 7702 "Test Method for Granular Activated Carbon from Coal" is divided into.
— Part 1. Determination of Moisture;
— Part 2. Determination of Particle Size;
— Part 3. Determination of Hardness;
— Part 4. Determination of Packing Density;
— Part5. Determination of Absorption of Water;
— Part 6. Determination of Methylene Blue Absorption;
— Part 7. Determination of Iodine Number;
— Part 8. Determination of Phenol Absorption;
— Part 9. Determination of Ignition Temperature;
— Part 10. Determination of Service Life against Benzene and Chloroethane
Vapors;
— Part 13. Determination of CCL4 Vapor Absorption;
— Part14. Determination of Sulphur Capacity;
— Part 15. Determination of Ash Content;
— Part 16. Determination of pH Value;
— Part 17. Determination of Floatation Ratio;
— Part 18. Determination of Caramel Absorption;
— Part 19. Determination of Carbon Tetrachloride (CCl4) Desorption;
— Part 20. Determination of Pore Volume and Specific Surface Area.
This Part is part 3 of GB/T 7702.
This Part modifies and adopts ASTM D 3802.1979 "Standard Test Method for
Ball-Pan Hardness of Activated Carbon" (reconfirmed in 2005). Compared with ASTM
D 3802.1979, the major technical differences are as follows.
a) The volume of sample is adjusted to 50mL;
b) The sample wearing method is changed to ball-milling method;
c) Technical requirements of hardness tester are added.
This Part replaces GB/T 7702.3-1997 "Standard Test Method for Hardness of
Granular Activated Carbon from Coal – Determination of Hardness".
Compared with GB/T 7702.3-1997, the main changes of this Part are as follows.
a) Structure of this standard is adjusted according to GB/T 1.1-2000 "Directives
for Standardization - Part 1. Rules for the Structure and Drafting of Standards"
and GB/T 20001.4-2001 "Rules for Drafting Standards - Part 4. Methods of
Chemical Analysis";
b) This revision combines the ASTM standard ASTM D 3802.1979 "Standard Test
Method for Ball-Pan Hardness of Activated Carbon" (reconfirmed in 2005) with
the actual situation of China.
c) The volume of sample is adjusted to 50mL;
d) The sample wearing method is changed to ball-milling method;
e) Technical requirements of hardness tester are added.
This Part was proposed by and shall be under the jurisdiction of China North
Industries Group Corporation.
Drafting organization of this Part. Shanxi Xinhua Chemicals Co., Ltd.
Chief drafting staffs of this Part. Zhang Xu, Li Weibing, Yuan Yidong, Zhao Honghai,
Zhao Jijun, Chi Guangxiu, and Li Ruomei.
The historical editions replaced by this Part are as follows.
— GB/T 7702.3-1987, and GB/T 7702.3-1997.
Test Method for Granular Activated Carbon from Coal -
Determination of Hardness
1 Scope
This Part specifies the contents such as determination principle, determination
procedure and result calculation of the granular activated carbon from coal.
This Part is applicable to the determination of hardness of granular activated carbon
from coal (hereinafter referred to as activated carbon).
2 Principle
Under specified conditions, the sample is placed in a roller with a number of stainless
steel balls. Through mechanical rotation, the sample is worn. Determine the changing
conditions of the particle size of worn sample. Use the percentage OF the sample
mass retained on the test sieve TO the original sample mass AS the sample
hardness.
3 Instruments and Equipment
3.1 Hardness tester (see Figure 1). The roller speed of the hardness tester is
50r/min±2/min.
1 - The steel bass;
2- The sample;
3- The longitudinal bar of roller;
4- The roller;
5- The roller;
6- The driving wheel;
7- The motor;
8- The base.
8 Test Report
The test report shall include the following contents.
a) Serial number of the sample;
b) The standards used;
c) The methods used;
d) Test items;
e) Test results;
f) Testing personnel;
g) Date of test.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|