Powered by Google www.ChineseStandard.net Database: 189760 (15 Jun 2024)

GB/T 3903.39-2008 PDF in English

GB/T 3903.39-2008 (GB/T3903.39-2008, GBT 3903.39-2008, GBT3903.39-2008)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 3903.39-2008English150 Add to Cart 0-9 seconds. Auto-delivery. Footwear -- Test methods for uppers -- Delamination resistance Obsolete
GB/T 3903.39-2019English130 Add to Cart 0-9 seconds. Auto-delivery. Footwear -- Test methods for uppers -- Delamination resistance Valid

Preview PDF (Powered by Google. Reload if blank, scroll for next page)

Standards related to: GB/T 3903.39-2008

GB/T 3903.39-2008: PDF in English (GBT 3903.39-2008)

GB/T 3903.39-2008
ICS 61.060
Y 78
GB/T 3903.39-2008 / ISO 17698.2003
Footwear - Test methods for uppers -
Delamination resistance
(ISO 17698.2003, IDT)
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration Committee.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 5 
4 Apparatus and material ... 5 
5 Sampling ... 6 
6 Test method ... 7 
7 Expression of results ... 11 
8 Test report ... 11 
This Part of GB/T 3903 identically adopts the International Standard ISO
17698.2003 Footwear - Test methods for uppers - Delamination resistance
(English version).
For easy use, this Part makes the following editorial modifications.
a) modified “this International Standard” to “this Part”;
b) used decimal point “.” to replace “,” which was used as decimal point;
c) deleted the foreword of ISO 17698.2003;
d) deleted the table of contents of ISO 17698.2003;
e) directly used a national standard as reference which is corresponding to
the International standard that was used as reference in ISO 17698.2003;
f) deleted the appendix of ISO 17698.2003.
This Part was proposed by China Light Industry Association.
This Part shall be under the jurisdiction of National Technical Committee on
Footwear of Standardization Administration of China.
The drafting organizations of this Part. China Institute of Leather and Footwear
Industry, Fujian Footwear Industry Technology Development (Putian) Base.
Main drafters of this Part. Yan Huaidao, Zhang Weijuan, Wang Dechun.
Footwear - Test methods for uppers -
Delamination resistance
1 Scope
This Part of GB/T 3903 specifies a test method for determining the delamination
resistance of uppers irrespective of the material, in order to assess the
suitability for the end use.
This Part is applicable to uppers irrespective of the material.
2 Normative references
The following standards contain the provisions which, through reference in this
Part of GB/T 3903, constitute the provisions of this Part. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Part. However, the parties who enter into agreement based on this Part are
encouraged to investigate whether the latest versions of these documents are
applicable. For undated reference documents, the latest versions apply to this
GB/T 3903.7 Footwear - Ageing conditioning (GB/T 3903.7-2005, ISO
20870.2001, IDT)
GB/T 6682 Water for analytical laboratory use - Specification and test
methods (GB/T 6682-2008, ISO 3696.1987, MOD)
GB/T 16825.1-2008 Verification of static uniaxial testing machines - Part 1.
Tension/compression testing machines - Verification and calibration of the
force-measuring system (ISO 7500-1.2004, IDT)
GB/T 22049 Footwear - Standard atmospheres for conditioning and testing
of footwear and components for footwear (GB/T 22049-2008, ISO
18454.2001, IDT);
GB/T 22050 Footwear - Sampling location preparation and duration of
conditioning of samples and test pieces (GB/T 22050-2008, ISO 17709.2004,
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.