GB/T 38215-2019 PDF in English
GB/T 38215-2019 (GB/T38215-2019, GBT 38215-2019, GBT38215-2019)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 38215-2019 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Hot rolled steel strip for structural corrugated steel pipe
| Valid |
Standards related to (historical): GB/T 38215-2019
PDF Preview
GB/T 38215-2019: PDF in English (GBT 38215-2019) GB/T 38215-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
H 46
Hot rolled steel strip for structural corrugated steel
pipe
ISSUED ON: OCTOBER 18, 2019
IMPLEMENTED ON: SEPTEMBER 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Designation representation method ... 6
4 Order content ... 6
5 Size, shape, weight ... 7
6 Technical requirements ... 7
7 Test methods ... 8
8 Inspection rules ... 9
9 Packaging, marks and quality certificate ... 9
Hot rolled steel strip for structural corrugated steel
pipe
1 Scope
This Standard specifies designation representation method, order content, size,
shape, weight, technical requirements, test methods, inspection rules,
packaging, marks and quality certificate of hot rolled steel strip for structural
corrugated steel pipe.
This Standard is applicable to the hot rolled steel strip for structural corrugated
steel pipe that is necessary to have certain bearing requirements for the
production of bridges, culverts, tunnels, underground infrastructure, water
supply and drainage, water storage facilities, that the thickness is not greater
than 16mm (hereinafter referred to as the steel strip).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 222, Permissible tolerances for chemical composition of steel products
GB/T 223.5, Steel and iron - Determination of acid-soluble silicon and total
silicon content - Reduced molybdosilicate spectrophotometric method
GB/T 223.12, Methods for chemical analysis of iron, steel and alloy - The
sodium carbonate separation-diphenyl carbazide photometric method for the
determination of chromium content
GB/T 223.19, Methods for chemical analysis of iron, steel and alloy. The
neocuproine-chloroform extraction photometric method for the determination
of copper content
GB/T 223.23, Iron, Steel and Alloy-Determination of Nickel Content - The
Dimethylglyoxime Spectrophotometric Method
GB/T 223.40, Iron, Steel and Alloy - Determination of Niobium Content by
the Sulphochlorophenol S Spectrophotometric Method
3 Designation representation method
A steel designation consists of three parts: “Q” that is the initial for Chinese
pinyin “Qu” (yield strength), the specified minimum yield strength value and “BW”
that is the initials for Chinese pinyin “Bo Wen” (corrugated) that represents
usage.
For example: Q235BW
Where,
Q - the initial for Chinese pinyin “Qu” (yield strength of steel);
235 - the specified minimum yield strength value, in megapascals (MPa);
BW - the initials for Chinese pinyin “Bo Wen” (corrugated) that represents usage.
4 Order content
4.1 The contract and order sheet according to this Standard shall contain the
following information:
a) reference to this Standard;
b) product name;
c) designation;
d) size and unevenness accuracy;
e) weight;
f) roll diameter;
g) packaging method;
h) edge state;
i) other special requirements.
4.2 If the order contract does not specify the information such as the edge state,
thickness accuracy, packaging method, it shall be supplied in the form of non-
cutting, normal thickness accuracy and packaging provided by the supplier.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|