Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 3649-2008 (GB/T3649-2008)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 3649-2008English190 Add to Cart 0-9 seconds. Auto-delivery. Ferromolybdenum Valid


Standards related to: GB/T 3649-2008

GB/T 3649-2008: PDF in English (GBT 3649-2008)

GB/T 3649-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.100
H 42
Replacing GB/T 3649-1987
Ferromolybdenum
(ISO 5452:1980, Ferromolybdenum - Specification and conditions of delivery,
MOD)
ISSUED ON: AUGUST 05, 2008
IMPLEMENTED ON: APRIL 01, 2009
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Technical requirements ... 6 
4 Test method ... 7 
5 Inspection rules ... 7 
6 Packaging, storage, transportation, marking and quality certificate ... 8 
Appendix A (Informative) Comparison of clause numbers between this this
standard and ISO 5452:1980 (E) ... 9 
Appendix B (Informative) Technical differences between this standard and ISO
452:1980 (E) AND their reasons ... 10 
Appendix C (Informative) Ferromolybdenum - Determination of molybdenum
content - Lead molybdate gravimetric method ... 13 
Appendix D (Informative) Ferromolybdenum - Determination of tin content -
Phenylfluorone photometric method ... 16 
Foreword
This standard, through revision, adopted ISO 5452:1980 "Ferromolybdenum -
Specification and conditions of delivery" (English version).
This standard was redrafted in accordance with ISO 5452:1980. In order to
facilitate comparison, Appendix A lists the comparison of the clause numbers
BETWEEN this standard AND ISO 5452:1980.
Considering Chinese national conditions, this standard made revisions, when
adopting ISO 5452:1980. These technical differences are marked with a single
vertical line, in the margins of the terms they refer to. Appendix B gives a list of
technical differences and their reasons, for reference.
For ease of use, for ISO 5452:1980, this standard has also made the following
editorial changes:
- CHANGE the term "this international standard" to "this standard";
- USE a decimal point ".", to replace the comma ",", which was originally used
as a decimal point;
- DELETE the foreword of ISO 5452:1980.
This standard replaces GB/T 3649-1987 "Ferromolybdenum".
Compared with GB/T 3649-1987, the main changes of this standard are as
follows:
- ADD the foreword of the standard;
- ADD the normative references;
- REDUCE the 9 designations of the original standard to 6 designations;
- ADJUST the content of molybdenum, carbon, sulfur, copper;
- ADD a packaging method;
- ADD Appendix A, Appendix B, Appendix C, Appendix D.
Appendix A, Appendix B, Appendix C, Appendix D of this standard are
informative appendixes.
This standard was proposed by the China Iron and Steel Industry Association.
This standard shall be under the jurisdiction of the National Pig Iron and
Ferroalloy Standardization Technical Committee.
Ferromolybdenum
1 Scope
This standard specifies the technical requirements, test methods, inspection
rules, packaging, storage and transportation, marking and quality certificates of
ferromolybdenum.
This standard applies to ferromolybdenum, which is added, as a molybdenum
additive, in steelmaking, casting or alloy materials.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 3650 The general rules for inspection packing storing transportation
marking and certification of ferroalloy
GB/T 4010 Ferroalloys - Sampling and preparation of samples for chemical
analysis (GB/T 4010-1994, neq ISO 4552:1987)
GB/T 5059.1 Methods for chemical analysis of ferromolybdenum - The 8-
hydroxyquinoline gravimetric method for the determination of molybdenum
GB/T 5059.2 Methods for chemical analysis of ferromolybdenum - The
malachite green spectrophotometric method for the determination of
antimony content
GB/T 5059.3 Methods for chemical analysis of ferromolybdenum - The
atomic absorption spectrophotometric method for the determination of
copper content
GB/T 5059.5 Methods for chemical analysis of ferromolybdenum - The
gravimetric method for the determination of silicon content
GB/T 5059.6 Ferromolybdenum - Determination of phosphorus content -
Molybdo bismuthyl phosphoric blue spectrophotometric method and the
The sampling and preparation of samples, for chemical analysis of
ferromolybdenum shall be in accordance with the provisions of GB/T 4010.
5.3 Quality inspection and acceptance
The quality inspection and acceptance of ferromolybdenum shall meet the
requirements of GB/T 3650.
5.4 Sampling and acceptance of particle size
The sampling and acceptance of the ferromolybdenum particle size shall be in
accordance with the provisions of GB/T 13247.
6 Packaging, storage, transportation, marking and
quality certificate
6.1 Packaging
The products are packed in iron drums or bags, which has a net weight of 100
kg per drum or 1000 kg per bag. If the purchaser has special requirements for
packaging, the supplier and the purchaser can negotiate separately.
6.2 Storage, transportation, marking, quality certificate
The storage, transportation, marking, quality certificate of the product shall
comply with the requirements of GB/T 3650.
6.3 Other
If the purchaser has special requirements for product packaging, storage,
transportation, marking, etc., it shall be carried out in accordance with the
contract.
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.