GB/T 35840.3-2018 PDF English
Search result: GB/T 35840.3-2018 English: PDF (GB/T35840.3-2018)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 35840.3-2018 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Steels for Plastic Mould - Part 3: Corrosion Resistant Steels
| Valid |
PDF Preview: GB/T 35840.3-2018
GB/T 35840.3-2018: PDF in English (GBT 35840.3-2018) GB/T 35840.3-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.35
H 40
Steels for Plastic Mould - Part 3. Corrosion Resistant Steels
ISSUED ON. MAY 14, 2018
IMPLEMENTED ON. FEBRUARY 1, 2019
Issued by. State Administration for Market Regulation of the People’s
Republic of China;
Standardization Administration Committee of the People’s
Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Classification ... 8
4 Content of Ordering ... 8
5 Dimension, Appearance and Weight ... 8
6 Technical Requirements ... 9
7 Test Methods ... 13
8 Inspection Rules ... 15
9 Packaging, Marking and Certification ... 15
Appendix A (normative appendix) ... 16
Appendix B (normative appendix) ... 18
Steels for Plastic Mould - Part 3. Corrosion Resistant Steels
1 Scope
This Part of GB/T 35840 specifies the content of ordering, dimension, appearance,
weight, technical requirements, test methods, inspection rules, packaging, marking
and certification of corrosion resistant steels for plastic mould.
This Part is applicable to corrosion resistant round steel, square steel and flat steel
(hereinafter referred to as steels) that are used for the manufacture of plastic moulds
through hot rolling, forging and machining delivery.
2 Normative References
The following documents are indispensable to the application of this Standard. In terms
of references with a specified date, only versions with a specified date are applicable
to this Standard. The latest version (including all the modifications) of references
without a specified date is also applicable to this Standard.
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination
of Phosphorus Content
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon
Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual
Titration or Potentiometric Titration Method
GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium
Content
GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-
benzoy-N-phenylhydroxylamine Extraction Photometric Method for the
Determination of Vanadium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium
Thiosulfate Separation Iodometric Method for the Determination of Copper
Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Neocuproine - Chloroform Extraction Photometric Method for the Determination of
Copper Content
Perchloric Acid Dehydration Gravimetric Method for the Determination of Silicon
Content
GB/T 223.61 Methods for Chemical Analysis of Iron, Steel and Alloy – The
Ammonium Phosphomolybdate Volumetric Method for the Determination of
Phosphorus Content
GB/T 223.62 Methods for Chemical Analysis of Iron, Steel and Alloy - The Butyl
Acetate Extraction Photometric Method for the Determination of Phosphorus
Content
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium
(potassium) Periodate Photometric Method for the Determination of Manganese
Content
GB/T 223.64 Iron, Steel and Alloy - Determination of Manganese Content - Flame
Atomic Absorption Spectrometric Method
GB/T 223.67 Iron, Steel and Alloy - Determination of Sulfur Content - Methylene
Blue Spectrophotometric Method
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the
Determination of Sulfur Content
GB/T 223.69 Iron, Steel and Alloy - Determination of Carbon Contents - Gas-
volumetric Method after Combustion in the Pipe Furnace
GB/T 223.71 Methods for Chemical Analysis of Iron, Steel and Alloy - The
Gravimetric Method after Combustion in the Pipe Furnace for the Determination
of Carbon Content
GB/T 223.72 Iron, Steel and Alloy - Determination of Sulfur Content - Gravimetric
Method
GB/T 223.76 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame
Atomic Absorption Spectrometric Method for the Determination of Vanadium
Content
GB/T 223.82 Steel and Iron - Determination of Hydrogen Content - Inert Gas
Impulse Fusion Heat Conductivity Method
GB/T 223.85 Steel and Iron - Determination of Sulfur Content – Infrared Absorption
Method after Combustion in an Induction Furnace
GB/T 223.86 Steel and Iron - Determination of Total Carbon Content - Infrared
Absorption Method after Combustion in an Induction Furnace
3 Classification
In accordance with methods of application and processing, steels can be divided into
2 types as follows.
a) Steel for pressure work UP
1) Hot pressure processing UHP
2) Cold pressure processing UCP
b) Steel for cut work UC
Methods of steel application and processing shall be indicated in the contract.
4 Content of Ordering
Contract or order of steels that are purchased in accordance with this Part shall include
the following content.
a) Serial number of this Part;
b) Product name;
c) Nameplate (refer to 6.1);
d) Smelting method (refer to 6.2);
e) Product specification;
f) Dimension, appearance and allowable deviation (refer to Chapter 5);
g) Status of delivery (refer to 6.3);
h) Weight (or quantity);
i) Special requirements.
5 Dimension, Appearance and Weight
5.1 Dimension, appearance and allowable deviation of hot-rolled round steel and
square steel shall comply with the stipulation in 5.1.1 in GB/T 1299-2014.
5.2 Dimension, appearance and allowable deviation of hot-rolled flat steel shall comply
with the stipulation in 5.1.2 in GB/T 1299-2014.
contract.
8 Inspection Rules
8.1 Inspection and Acceptance Check
Quality inspection and acceptance check of steels shall be undertaken by the supply
side’s technical quality supervision department. If necessary, the demand side is
entitled to inspect and conduct acceptance check in accordance with the stipulations
in this Part.
8.2 Batch Rules
8.2.1 Steels shall be inspected and accepted by batch. Each batch shall be constituted
of steels of the same nameplate, furnace number, processing purpose, delivery status,
specification and thermal treatment furnace number.
8.2.2 Each batch of electro-slag re-melting steel shall be constituted of steel under the
same sub-furnace number, processing purpose, delivery status, specification and
thermal treatment furnace number. On the premise of guaranteeing stable technique
and compliance with various requirements in this Part, a batch can be formed in
accordance with the primary furnace number of electro-slag re-melting. However, 1
PCS shall be taken as a sample from each sub-furnace number for the chemical
composition test.
8.3 Sampling Size and Position
The sampling size and position of steel test shall comply with the stipulation in Table
5.
8.4 Re-inspection and Determination
8.4.1 When the inspection result fails to comply with the requirements in this Part, re-
inspection can be conducted. Re-inspection and determination shall comply with the
stipulations in GB/T 17505.
8.4.2 The various measured value of steel inspection shall be revised in accordance
with revised value comparison method. Rules of numerical revision shall comply with
the stipulations in GB/T 8170.
9 Packaging, Marking and Certification
Packaging, marking and certification of steel shall comply with the stipulations in GB/T
2101.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|