Powered by Google www.ChineseStandard.net Database: 189759 (14 Jul 2024)

GB/T 33761-2017 PDF in English

GB/T 33761-2017 (GB/T33761-2017, GBT 33761-2017, GBT33761-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 33761-2017English70 Add to Cart 0-9 seconds. Auto-delivery. General principles for green product assessment Valid

PDF Preview

Standards related to: GB/T 33761-2017

GB/T 33761-2017: PDF in English (GBT 33761-2017)

GB/T 33761-2017
ICS 13.020.10
Z 04
General Principles for
Green Product Assessment
ISSUED ON. MAY 12, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Basic Principle ... 5
5 Assessment Indicator ... 6
6 Assessment Method ... 7
Appendix A (Normative) Content Framework of Green Product Assessment
Standard ... 8
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed by and under the jurisdiction of National Green Product
Assessment Standardization General Team.
Drafting organizations of this Standard. China National Institute of Standardization,
Research Center for Eco-Environmental Science of Chinese Academy of Science,
Guangzhou Mengbiao Quality Testing Technology Service Co., Ltd., Xi’an Kaimi Co.,
Ltd., Chilwee Power Co., Ltd., Guangzhou Institute of Standardization, Shanghai
Jianke Technical Assessment of Construction Co. Ltd., Shandong Taihe Water
Treatment Technology Co., Ltd., Xiamen Academy of Building Research Group Co.,
Ltd., Tianjin GreenBio Materials Co., Ltd., and Zhejiang Dashengda Packaging Co.,
Chief drafting staffs of this Standard. Fu Yong, Lin Ling, Gao Dongfeng, Wu Lili, Yang
Jianxin, Sun Xiaoli, Li Wuxian, Yang Shuo, Yu Wen, Gao Huanquan, Qiang Pengtao,
Zhou Mingming, Xu Zhan, Yan Xiaomin, Zhang Xiaobo, Yang Yong, Wang Guangli, Ye
Jin, Sun Junjun, Li Changtai, Wang Xiuteng, Shang Taisheng, and Wang Donghai.
General Principles for
Green Product Assessment
1 Scope
This Standard specifies the basic principle for assessment of green product,
assessment indicator and assessment method.
This Standard is applicable to the preparation and modification work for the specific
assessment standards of green products.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 7635.1 National Central Product Classification and Codes – Part 1.
Transportable product
GB/T 19001 Quality Management System -Requirements
GB/T 24001 Environmental Management Systems – Requirements with Guidance
for Use
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Green product
The product, in the whole life cycle process, meets the requirements for environmental
protection, exerts no or lilt harm to the ecological environment or human health, with
small energy consumption and high quality.
3.2 Reference value of assessment indicator
The reference value of indicator setting for assessing the green product.
5.3.2 Energy property indicator
The energy property focuses on selecting the indicators such as energy saving and
energy efficiency, etc. during the product manufacturing and using processes.
5.3.3 Environment property indicator
The environment property focuses on selecting the indicators such as pollutant
discharge during the producing process, and toxic and hazardous substances release
during the using process.
5.3.4 Quality property indicator
The quality property focuses on selecting the indicators such as durability, health and
safety, etc. of the products with high consumer attention and influencing the high-end
5.4 Confirming principle for reference value of indicator
According to the product and industry features, aiming to assess and screen the green
product; adopting the following methods such as information collection, site
investigation, inspection and testing, literature search, expert advice, etc.; confirm the
reference value of indicator scientifically and reasonably. When confirming the
reference value of the assessment indicator, take the following principles that the
proportion of such domestic product meeting all indicator requirements doesn’t exceed
5%, and the proportion of such product meeting each single indicator requirements
doesn’t exceed 10% in principle, so that demonstrate the advantage of green product.
5.5 Inspection method indicator calculation method
In the assessment standards on different types of green products, the appendix shall
give calculation method and inspection method for each indicator; the relevant
indicator and inspection method shall give priority to the existing national or
international standards.
6 Assessment Method
This Standard adopts the method of indicator conformity assessment. The green
product shall meet the basic requirements and assessment indicator requirements.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.