Powered by Google www.ChineseStandard.net Database: 189760 (20 Jul 2024)

GB/T 33540.3-2017 PDF in English

GB/T 33540.3-2017 (GB/T33540.3-2017, GBT 33540.3-2017, GBT33540.3-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 33540.3-2017English85 Add to Cart 0-9 seconds. Auto-delivery. Lubricants for wind turbine -- Part 3: Gear oils Valid

PDF Preview

Standards related to: GB/T 33540.3-2017

GB/T 33540.3-2017: PDF in English (GBT 33540.3-2017)

GB/T 33540.3-2017
ICS 75.100
E 40
Lubricants for wind turbine - Part 3. Gear oils
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
Table of contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Product variety and identification ... 6 
4 Requirements and test methods ... 6 
5 Inspection rules ... 7 
6 Marking, packaging, transportation and storage ... 9 
Lubricants for wind turbine - Part 3. Gear oils
1 Scope
This part of GB/T 33540 specifies the product variety and identification,
requirements and test methods, inspection rules, marking, packaging,
transportation and storage of the wind turbine generator gear oil which uses
the synthetic oil as the base oil AND added a variety of functional additives.
This part is applicable to the gear oil used in the wind turbine gear transmission
system, which is composed of the main gearbox, yaw gearbox, and variable
pitch gearbox.
The product covered in this part is particularly suitable for the lubrication of the
low temperature wind turbine gearbox.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 260 Petroleum products - Determination of water
GB/T 265 Petroleum products - Determination of kinematic viscosity and
calculation of dynamic viscosity
GB/T 1690 Rubber vulcanized or thermoplastic - Determination of the effect
of liquids
GB/T 1995 Petroleum products - Calculation of viscosity index
GB/T 2541 Petroleum products; Computation table for viscosity indices
GB/T 3141 Industrial liquid lubricants - ISO viscosity classification
GB/T 3142 Lubricants; Determination of load carrying capacity (four balls
GB/T 3535 Petroleum products - Determination of pour point
GB/T 3536 Petroleum products - Determination of flash point and fire point -
Cleveland open cup method
GB/T 4756 Method for manual sampling of petroleum liquids
GB/T 5096 Petroleum products - Test method for copper strip corrosion
GB/T 8022 Determination method of anti-emulsifying properties of
lubricating oil
GB/T 11143 Standard test method for rust-preventing characteristics of
inhibited mineral oil in the presence of water
GB/T 11145 Standard test method for measurement of low-temperature
viscosity of lubricants - Brookfield viscometer method
GB/T 12579 Determination of foaming characteristics of lubricating oils
GB/T 14039 Hydraulic fluid power - Fluids - Method for coding the level of
contamination by solid particles
DL/T 432 Determination of particulate contamination in oil
NB/SH/T 0306 Assessment for bearing capacity of lubricating oil - FZG
visual observation
NB/SH/T 0845 Determination of viscosity shear stability of transmission
lubricants using he tapered roller bearing rig
NB/SH/T 0870 Determination of dynamic viscosity and density of petroleum
products as well as calculation of kinematic viscosity - Stabinger Viscometer
SH/T 0123 Determination method for oxidation property of extreme
pressure lubricant
SH 0164 Petroleum products - Rules for packaging, storage, transportation
and handover acceptance
SH/T 0189 Determination method for lubricant wear-resisting characteristics
(four-ball machine method)
DIN 51819-3 Testing of lubricants - Mechanical-dynamic testing in the roller
bearing test apparatus FE8 - Part 3. Test method for lubricating oils, oblique
axial ball bearing
FVA 54/I-IV Procedure for the investigation of the micro-pitting capacity of
gear lubricants
If the exit-factory inspection results and the type inspection results comply with
the technical requirements of Chapter 4, this batch of products shall be
deemed as qualified.
5.5 Re-inspection rules
If there is an item of exit-factory inspection and type inspection failing to
comply with the technical requirements of Chapter 4, FOLLOW the
requirements of GB/T 4756 to re-take double number of samples for the
purposes of re-inspection. If the re-inspection results still fail to comply with the
technical requirements in Chapter 4, this batch of products will be deemed as
6 Marking, packaging, transportation and storage
The marking, packaging, transportation and storage, and handover
acceptance of this product shall follow the requirements of SH 0164.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.