GB/T 30719-2014 PDF in English
GB/T 30719-2014 (GB/T30719-2014, GBT 30719-2014, GBT30719-2014)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 30719-2014 | English | 140 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Liquid hydrogen land vehicle fueling system interface
| Valid |
Standards related to (historical): GB/T 30719-2014
PDF Preview
GB/T 30719-2014: PDF in English (GBT 30719-2014) GB/T 30719-2014
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 19
GB/T 30719-2014 / ISO 13984.1999
Liquid hydrogen land vehicle fueling system interface
(ISO 13984.1999, Liquid hydrogen –
Land vehicle fueling system interface, IDT)
ISSUED ON. JUNE 9, 2014
IMPLEMENTED ON. OCTOBER 1, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Requirements ... 6
5 Testing and inspection methods ... 16
6 Qualification of personnel ... 19
7 Security and safety ... 20
8 Maintenance ... 21
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard uses translation method to make it identical with ISO 13984.1999
Liquid hydrogen - Land vehicle fueling system interface.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee on Hydrogen Energy of Standardization Administration of
China (SAC/TC 309).
The drafting organizations of this Standard. Tongji University, China National
Institute of Standardization, Shanghai Shunhua New Energy System Co., Ltd.,
Tsinghua University, Zhejiang University.
Main drafters of this Standard. Ma Jianxin, Pan Xiangmin, Wang Geng, Liu
Shaojun, Li Yan, Wang Cheng, Xu Ping, Ou Kesheng.
Liquid hydrogen land vehicle fueling system interface
1 Scope
This Standard specifies the characteristics of liquid hydrogen refueling and
dispensing systems on land vehicles of all types.
This Standard is applicable to the design and installation of liquid hydrogen (LH2)
fueling and dispensing systems.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
ISO 1106-3 Recommended practice for radiographic examination of fusion
welded joints - Part 3. Fusion welded circumferential joints in steel pipes of
up to 50 mm wall thickness.
ISO 1182 Reaction to fire tests for building products - Non-combustibility
test.
ISO 9303 Seamless and welded (except submerged arc-welded) steel
tubes for pressure purposes - Full peripheral ultrasonic testing for the
detection of longitudinal imperfections.
ISO 10286 Gas cylinders - Terminology.
ISO 11484 Steel tubes for pressure purposes - Qualification and
certification of non-destructive testing (NDT) personnel.
ISO 12095 Seamless and welded steel tubes for pressure purposes -
Liquid penetrant testing.
ISO 13663 Welded steel tubes for pressure purposes - Ultrasonic testing
of the area adjacent to the weld seam for the detection of laminar
imperfections.
ISO 13664 Seamless and welded steel tubes for pressure purposes -
Magnetic particle inspection of the tube ends for the detection of laminar
imperfections.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|