Powered by Google www.ChineseStandard.net Database: 189759 (16 Jun 2024)

GB/T 30636-2014 PDF in English

GB/T 30636-2014 (GB/T30636-2014, GBT 30636-2014, GBT30636-2014)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 30636-2014English150 Add to Cart 0-9 seconds. Auto-delivery. Determination of sialic acid in swiftlets nest and swiftlets nest products -- Liquid chromatographic method Obsolete

Preview PDF (Powered by Google. Reload if blank, scroll for next page)

Standards related to: GB/T 30636-2014

GB/T 30636-2014: PDF in English (GBT 30636-2014)

GB/T 30636-2014
ICS 67.050
X 04
Determination of sialic acid in swiflets nest and
swiflets nest products - Liquid chromatographic
Issued by: General Administration of Quality Supervision Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Method summary ... 4 
4 Reagents and materials ... 5 
5 Instruments ... 5 
6 Analytical procedures ... 6 
7 Determination ... 7 
8 Result calculation ... 7 
9 Precision ... 8 
Appendix A (Informative) Chromatograms of sialic acid standard solution and
swiflets nest sample hydrolysate ... 9 
Determination of sialic acid in swiflets nest and
swiflets nest products - Liquid chromatographic
1 Scope
This standard specifies the method for the determination of sialic acid in swiflets
nest and its products by liquid chromatography.
This standard applies to the determination of sialic acid in swiflets nest and its
The detection limit of this standard is 0.3 g/kg for swiflets nest and 0.003 g/kg
for swiflets nest products.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 6379.2 Accuracy (trueness and precision) of measurement methods
and results - Part 2: Basic method for the determination of repeatability and
reproducibility of a standard measurement method
GB/T 6682 Water for analytical laboratory use - Specification and test
3 Method summary
Swiflets nest and swiflets nest products are heated and hydrolyzed in acetic
acid solution to release sialic acid. The hydrolysate is separated by a strong
cation exchange column, detected by liquid chromatography-UV detector,
quantified by external standard method.
4 Reagents and materials
4.1 Water: Meet the grade-1 water requirements as specified in GB/T 6682.
4.2 Acetonitrile: Chromatographically pure.
4.3 Glacial acetic acid: Analytically pure.
4.4 Phosphoric acid: Analytically pure.
4.5 Sialic acid (N-acetylneuraminic acid, C11H19NO9): The purity is greater than
4.6 Polyethylene glycol: The average relative molecular mass is not less than
4.7 0.1% phosphoric acid solution: Take 1 mL of phosphoric acid; add water to
make the volume to 1000 mL; mix well; use 0.45 μm microporous membrane
to filter it.
4.8 50% acetic acid solution: Take 100 mL of glacial acetic acid; add 100 mL of
water; mix it uniformly.
4.9 10% polyethylene glycol solution: Weigh 50 g of polyethylene glycol; add
500 mL of water and stir to dissolve it.
4.10 Standard stock solution of sialic acid (1.00 mg/mL): Weigh 100.0 mg of
sialic acid; add 20 mL of water to dissolve it; add acetonitrile to make the volume
reach to 100 mL. Store in the dark at 4 °C; the shelf life is one month.
4.11 Dialysis bag: It allows the penetration of compounds which have a
molecular weight of less than 10000; soak in water for 1 h before use.
4.12 0.45 μm microporous membrane: Organic phase.
4.13 0.45 μm syringe filter: Organic phase.
4.14 Mobile phase: Take 100 mL of 0.1% phosphoric acid solution; add
acetonitrile to make the volume to 1000 mL; mix it uniformly; use 0.45 μm
organic phase microporous membrane to filter it.
5 Instruments
5.1 Liquid chromatograph: Equipped with ultraviolet detector.
5.2 Constant temperature water bath.
Measure 1.00 mL, 2.00 mL, 4.00 mL, 6.00 mL, 8.00 mL, 10.0 mL of the standard
stock solution of sialic acid, respectively. Place them in a 100 mL volumetric
flask. Add the mobile phase to the mark. Prepare the sialic acid standard
solution which has a concentration of 10.0 μg/mL, 20.0 μg/mL, 40.0 μg/mL, 60.0
μg/mL, 80.0 μg/mL, 100.0 μg/mL. Prepare for testing.
7 Determination
7.1 Chromatographic reference conditions
7.1.1 Chromatographic column: 300SCX cation exchange chromatographic
column, 4.6 mm × 250 mm, particle size 5 μm, or equivalent.
7.1.2 Mobile phase: Acetonitrile-0.1% phosphoric acid aqueous solution (90 +
10, volume ratio).
7.1.3 Column temperature: 30 °C.
7.1.4 Flow rate: 1.0 mL/min.
7.1.5 Injection volume: 10 μL.
7.1.6 Detection wavelength: 205 nm.
7.2 Liquid chromatography determination
Take the sialic acid series standard solution and test solution, respectively. Use
the peak area of the standard series solution as the ordinate and the
concentration as the abscissa, draw the standard curve. Use the retention time
for qualification and use the external standard method of peak area for
quantitation. Refer to Appendix A for the chromatograms of the sialic acid
standard solution and the hydrolysate of the swiflets nest sample.
8 Result calculation
The measurement results can be automatically calculated by the instrument
workstation, or calculated according to formula (1):
X - The content of sialic acid in the test solution, in grams per kilogram (g/kg);
c - The concentration of sialic acid in the test solution as found from the
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.