GB/T 27611-2011 PDF English
Search result: GB/T 27611-2011_English: PDF (GB/T27611-2011)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 27611-2011 | English | 160 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
General requirements and labeling for recycled and remanufactured products
| Valid |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 27611-2011 Related standards: GB/T 27611-2011
PDF Preview: GB/T 27611-2011
GB/T 27611-2011: PDF in English (GBT 27611-2011) GB/T 27611-2011
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.020.10
Z 04
General Requirements and Labeling for Recycled and
Remanufactured Products
ISSUED ON: DECEMBER 5, 2011
IMPLEMENTED ON: MAY 1, 2012
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China.
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Definitions ... 4
4 General Requirements ... 5
5 Labeling for Recycled and Remanufactured Products ... 5
Appendix A (informative) Relevant Standards on Technical Requirements for Some
Recycled and Remanufactured Products ... 9
Appendix B (normative) Style and Size of Labeling Graph ... 10
Bibliography ... 12
Foreword
This Standard was drafted in accordance with the rules provided in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of National Technical
Committee 415 on Fundamentals and Management for Waste Product Recovery of
Standardization Administration of China (SAC/TC 415).
The drafting organizations of this Standard: China National Institute of Standardization; Army
Academy of Armored Forces of the People’s Liberation Army of China; Shenzhen Center
Testing International; China Resource Recycling Association; China Association of Circular
Economy; China National Resources Recycling Association; China Tyre Retreading, Repairing
and Recycling Association; China Nonferrous Metals Industry Association Recycling Metal
Branch.
The main drafters of this Standard: Lin Ling, Gao Dongfeng, Zhang Wei, Zhu Ping, Wang
Xiuteng, Chen Jianhua, Fu Hongjun, Wang Shuwen, Gao Yanli, Pang Shuhua, Lu Jian.
General Requirements and Labeling for Recycled and
Remanufactured Products
1 Scope
This Standard specifies the general requirements and labeling for recycled products (also
known as regenerated products) and remanufactured products (also known as remanufactured
goods).
This Standard applies to the manufacture and trade of recycled and remanufactured products,
but not to remanufactured automobiles and their components and parts.
2 Normative References
The following documents are indispensable to the application of this document. In terms of
references with a specified date, only versions with a specified date are applicable to this
document. In terms of references without a specified date, the latest version (including all the
modifications) is applicable to this document.
GB/T 20861 Terminology of Waste Product Recovery
GB/T 23685 General Technical Specifications of Recovering for Waste Electrical and
Electronic Equipment
3 Definitions
What is defined in GB/T 20861 and GB/T 23685, and the following terms and definitions are
applicable to this document.
3.1 Remanufacturing
Remanufacturing refers to the manufacturing process of professionally repairing or upgrading
and rebuilding waste products, so that their technical performance reaches or exceeds the level
of new prototypes.
3.2 Remanufactured Products
Remanufactured products refer to products that are remanufactured from waste equipment or
components and parts and comply with the requirements of relevant standards.
4 General Requirements
4.1 General Requirements for Recycled Products
4.1.1 The amount of recycled material used in recycled products shall not be lower than 50%
(by mass).
4.1.2 The recycled products shall comply with the existing technical requirements for recycled
products or adopt the corresponding new product inspection methods for inspection. They shall
comply with the requirements of relevant standards from the perspectives of the safety,
performance and environmental protection of new products.
NOTE: please refer to Table A.1 of Appendix A for relevant standards on the technical requirements
for some recycled products.
4.2 General Requirements for Remanufactured Products
In accordance with the inspection methods of corresponding new products, the various
indicators of the remanufactured products, such as: quality, safety, performance and
environmental protection, shall not be lower than the requirements of the relevant standards of
prototype products.
NOTE: please refer to Table A.2 of Appendix A for relevant standards on the technical requirements
for some remanufactured products.
5 Labeling for Recycled and Remanufactured Products
5.1 Labeling for Recycled Products
5.1.1 Graphic style of labeling
The graphic style of labeling is shown in Figure 1.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|