GB/T 26774-2016 PDF in English
GB/T 26774-2016 (GB/T26774-2016, GBT 26774-2016, GBT26774-2016)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 26774-2016 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Technical specification for car carriers
| Valid |
| GB/T 26774-2011 | English | 279 |
Add to Cart
|
3 days
|
Technical specification for car transport vehicles
| Obsolete |
Standards related to (historical): GB/T 26774-2016
PDF Preview
GB/T 26774-2016: PDF in English (GBT 26774-2016) GB/T 26774-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.150
T 50
Replacing GB/T 26774-2011
Technical Specification for Car Carriers
ISSUED ON. JULY 26, 2016
IMPLEMENTED ON. JULY 26, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative Reference ... 6
3 Terms and Definitions ... 8
4 Technical Requirements ... 8
5 Test Methods ... 13
6 Inspection Rules ... 13
7 Marks ... 14
8 Vehicle Accompanied Documents, Transportation, Storage ... 15
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 26774-2011 Technical Specification for Car Transport
Vehicles.
Compared with GB/T 26774-2011, this Standard has main technical changes as
follows besides the editorial modifications.
--- Modify the English name of the standard;
--- Modify the applicable scope of the standard (see Chapter 1);
--- Modify the definitions of car carrier, goods vehicle for car carrier, trailer for car
carrier, and semi-trailer towing vehicle for car carrier in Chapter 3;
--- Modify the clause structure of the Chapter 4; modify the general rules (4.1 of
2011 Edition) into general requirements (4.1 of this edition); delete the working
conditions (4.2 of 2011 Edition); modify the entire car (4.3 of 2011 Edition) into
performance requirements (4.2 of this Edition), structure requirements (4.3 of
this Edition), configuration requirements (4.4 of this Edition), and process
requirements (4.5 of this Edition); modify the special device of car carrier (4.4 of
2011 Edition) into platform requirements (4.6 of this Edition); modify the lifting
device (4.5 of 2011 Edition) into lifting device requirements (4.7 of this Edition);
--- Add the general requirements for design, installation, and matching of towing
vehicle and trailer (see 4.1.3 and 4.1.4 of this Edition); add the requirements for
mass limit, channel circle, and epicycloid value of car carrier (see 4.1.6 of this
Edition); delete the requirements for the transportation environment temperature
of vehicle [4.2a) of 2011 Edition]; modify the requirements for the driving road
grade of the car carrier (see 4.1.7 of this Edition);
--- Add the requirements for braking performance (see 4.2.1 of this Edition),
dynamic performance (see 4.2.2 of this Edition), lateral stability (see 4.2.3 of this
Edition), and driving track (see 4.2.4 of this Edition) of car carrier.
--- Add the mechanical connection interchangeability (see 4.3.1, 4.3.2, 4.3.3, 4.3.4
and 4.3.5 of this Edition) and electrical connection interchangeability (see 4.3.6
of this Edition) of car carrier; add the requirements for the side and rear lower
guards of car carrier (see 4.3.9 of this Edition); add the requirements for license
plate (frame) (see 4.3.10 of this Edition).
--- Add the requirements for satellite positioning vehicle terminal (see 4.4.1 of this
Edition), anti-lock braking system (see 4.4.2 of this Edition); tyre (see 4.4.3 of
this Edition), tyre balance (see 4.4.4 of this Edition), indirect filed device (see
Technical Specification for Car Carriers
1 Scope
This Standard specifies the terms and definitions, technical requirements, test
methods, inspection rules, mark, vehicle accompanied documents, transportation,
storage and etc. of the car carrier.
This Standard is applicable to the trucks, trailers, trains specially designed for
transporting the passenger cars and driving on the road; the special vehicles for
transporting other types of vehicles can also refer to this Standard to carry out.
2 Normative Reference
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB 1589 Limits of Dimensions, Axle Load and Masses for Road Vehicles
GB/T 4606 Road Vehicles - 50 Semi-Trailer Fifth Wheel Coupling Pin - Basic and
Mounting/Interchangeability Dimensions
GB 4785 Prescription for Installation of the External Lighting and Light Signalling
Devices for Motor Vehicles and Their Trailers
GB 7258 Safety Specifications for Power-Driven Vehicles Operating on Roads
GB 11567.1 Motor Vehicles and Trailers - Lateral Protection Requirements
GB 11567.2 Motor Vehicles and Trailers - Rear Underrun Protection Requirements
GB 12676 Technical Requirements and Testing Methods for Commercial Vehicle
and Trailer Braking Systems
GB/T 13594 Antilock Braking Performance and Test Procedure for Motor Vehicles
and Their Trailers
GB/T 13880 Road Vehicles - Fifth Wheels - Interchangeability
GB 15084 Motor Vehicles- Devices for Indirect Vision - Requirements of
Performance and Installation
GB/T 15088 Motor Vehicles - Fifth Wheel Coupling Pins - Strength Test
GB 15741 The License Plates (Crackets) and Its Position on Motor Vehicles and
Trailer
GB/T 18411 Road Vehicle - Manufacturer’s Plate
GB/T 18505 Dynamic Balance Test Method for Motor Vehicle Tyres
GB/T 20070 Road Vehicles - Mechanical Coupling Between Tractors and Semi-
Trailers - Interchangeability
GB 23254 Retro-Reflective Markings for Trucks and Trailers
GB/T 23336 General Technical Requirements for Semitrailer
GB/T 25979 Road Vehicles - Heavy Commercial Vehicle Combinations and
Articulated Buses - Lateral Stability Test Methods
GB 25990 Rear-Marking Plates for Vehicles and Their Trailers
GB/T 31083 Technical Requirements of Tie-Down Used in Passenger Car for
Road Transportation
GB/T 31879 Road Vehicles – General Technical Requirements for Fifth Wheel
GB/T 32860 Road Vehicles―Interchangeability of Drawbar Couplings
GB/T 32861 Road Vehicles - Location of Electrical and Pneumatic Connections
between Towing Vehicles and Trailers
JB/T 5943 Engineering Machinery General Technical Specifications for
Weldments
JT/T 794 GNSS System for Operating Vehicles -Technical specification for Vehicle
Terminals
QC/T 252 Type Test Regulations for Special Automobile
ISO 11407 Commercial Road Vehicles – Mechanical Coupling Between Towing
Vehicles with Coupling Mounted forward and below, and Centre-Axle Trailers –
Interchangeability
shall be inspected qualified before assembly.
4.1.3 The design and installation of towing vehicle and trailer shall ensure the
reasonable matching, reliable connection, and safety of electric, gas, hydraulic and
their control and use.
4.1.4 In the product technical documents of towing vehicle and trailer, it shall indicate
the adapted parameters of trailer or towing vehicle, such as contour, connection, other
key dimensions, and mass limit.
4.1.5 Semi-trailer for car carrier shall conform to the provisions of GB/T 23336; center
axle trailer shall refer to GB/T 23336 for being carried out.
4.1.6 Contour dimension, axle load, quality limit, channel circle and epicycloid value
of car carrier shall conform to the provisions of GB 1589.
4.1.7 Design for the center axle trailer train of car carrier shall meet the driving
requirements on Class II and above highways.
4.2 Performance requirements
4.2.1 The braking performance of car carrier shall conform to the provisions of GB
7258, GB 12676 and GB/T 13594.
4.2.2 The specific power [maximum net power of engine/total mass of car (train)] of
car carrier shall be no less than 5.4kW/t; and the maximum full-loading speed shall be
no less than 90km/h.
4.2.3 The rear amplification factor of lateral acceleration for train of car carrier shall
be no greater than 2.0.
4.2.4 If the train of car carrier drives in straight line on the flat and dry road with speed
of 30km/h; the maximum offset of trailer rear-axel wheel-traction centerline against the
towing vehicle front-axle wheel-traction centerline shall be no greater than 110mm.
4.3 Structure requirements
4.3.1 The semi-trailer towing vehicle shall be equipped with No.50 fifth wheel
conforming to the provisions of GB/T 13880 and GB/T 31879; while the semi-trailer of
car carrier shall adopt the No.50 towing pin conforming to the provisions of GB/T 4606
and GB/T 15088.
4.3.2 The mechanical connection interchangeability between semi-trailer towing
vehicle and semi-trailer of car carrier shall conform to the provisions of GB/T 20070.
4.3.3 The draw-bar connector interchangeability between goods vehicle of car carrier
and center axle trailer of car carrier shall conform to the provisions of GB/T 32860.
4.6.6 The car carrier shall specify the contour dimension of the loading vehicle
allowed by each loading position; and meet the safety clearance requirements of
loading vehicle. The minimum vertical spacing in between car carriers, the minimum
vertical spacing between loading vehicle and the front & rear end of the carriage, and
the minimum vertical spacing between loading vehicle top and upper goods platform
and ceiling below shall be no less than 100mm; the minim...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|