Powered by Google www.ChineseStandard.net Database: 189759 (16 Jun 2024)

GB/T 24551-2009 PDF in English

GB/T 24551-2009 (GB/T24551-2009, GBT 24551-2009, GBT24551-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 24551-2009English70 Add to Cart 0-9 seconds. Auto-delivery. Safety belt reminder for motor vehicles Obsolete
GB/T 24551-2021English185 Add to Cart 0-9 seconds. Auto-delivery. Safety belt reminder for motor vehicles Valid

Preview PDF (Powered by Google. Reload if blank, scroll for next page)

Standards related to: GB/T 24551-2009

GB/T 24551-2009: PDF in English (GBT 24551-2009)

GB/T 24551-2009
ICS 43.020
T 09
Safety Belt Reminder for Motor Vehicles
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Requirements ... 5
This Standard was prepared according to the technical contents of World Forum for
Harmonization of Vehicle Regulations Passive Safety Working Group Working
Document WP29/GRSP-35-18 Safety Belt Reminder – Technical Requirements (May,
2004), and Addendum 4 (April 2008) of 04 series (Version 5) of ECE R16 Performance
Requirements and Test Methods of Safety-Belts, Restrain Systems, Child Restraint
Systems and ISOFIX Child Restraint Systems for Occupants of Power-Driven Vehicles
(English Version).
This Standard was proposed by National Development and Reform Commission.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Automotive.
Drafting organization of this Standard. China Automotive Technology & Research
Chief drafting staffs of this Standard. Sun Zhendong, Li Weijing, and Wu Wei.
Safety Belt Reminder for Motor Vehicles
1 Scope
This Standard specifies the definition, indication signal and technical requirements of
safety belt reminder for motor vehicles.
This Standard is applicable to the safety belt reminder on the Type-M1 vehicle’s driver
seat position and/or front-row passenger seat position. The safety belt reminder on the
other seat positions on the Type-M1 vehicle and other type of vehicles can be
implemented for reference.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB 4094-1999 Motor Vehicles – Symbols for Controls, Indicators and Tell-Tales
3 Terms and Definitions
The following terms and definitions are applicable to this Standard.
3.1 Safety belt reminder
The system, when the occupant is not fastening the safety belt, reminds the occupant.
Such system consists of detecting the not fastened safety belt sensor and first alert
level and/or second alert level.
3.2 First alert level
The audible signal can be attached with a visual signal activated when the occupant is
not fastening the safety belt.
3.3 Second alert level
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.