GB/T 24528-2009 PDF in English
GB/T 24528-2009 (GB/T24528-2009, GBT 24528-2009, GBT24528-2009)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 24528-2009 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Carbon materials -- Determination method of the bulk density
| Valid |
Standards related to: GB/T 24528-2009
Preview PDF (Powered by Google. Reload if blank, scroll for next page)
GB/T 24528-2009: PDF in English (GBT 24528-2009) GB/T 24528-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.050
Q 52
Carbon Materials –
Determination Method of the Bulk Density
ISSUED ON. OCTOBER 30, 2009
IMPLEMENTED ON. MAY 1, 2010
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Principle ... 4
4 Apparatus ... 4
5 Specimen ... 5
6 Test Procedures ... 5
7 Result Calculation ... 5
8 Test Report ... 6
Foreword
This Standard was proposed by China Iron and Steel Association.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Steel.
Drafting organizations of this Standard. Sinosteel Jilin Carbon Co., Ltd., and China
Metallurgical Information and Standardization Research Institute.
Chief drafting staffs of this Standard. He Jingyuan, Zhang Xifen, Kang Jian, and Wang
Jun.
Carbon Materials –
Determination Method of the Bulk Density
1 Scope
This Standard specifies the principle, apparatus, specimen, test procedures and result
calculation for the determination of bulk density of carbon materials.
This Standard is applicable to determination of bulk density of carbon materials at
room temperature.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 1427 Sample Method of Carbon Material
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and
Judgement of Limiting Values
3 Principle
The bulk density of carbon materials indicates the mass of unit volume including the
porosity.
4 Apparatus
4.1 Balance. weighing range (0 ~ 1000)g, sensibility 0.01g.
4.2 Blast drying oven. it is equipped with automatic temperature control device,
which can maintain the temperature at (105 ~ 110) °C.
4.3 Vernier caliper. measuring range (0~ 200)mm, accuracy 0.02mm.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|