HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (3 Nov 2024)

GB/T 22393-2015 PDF in English


GB/T 22393-2015 (GB/T22393-2015, GBT 22393-2015, GBT22393-2015)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 22393-2015English150 Add to Cart 0-9 seconds. Auto-delivery. Condition monitoring and diagnostics of machines -- General guidelines Valid
GB/T 22393-2008English719 Add to Cart 3 days Condition monitoring and diagnostics of machines -- General guidelines Obsolete
Standards related to (historical): GB/T 22393-2015
PDF Preview

GB/T 22393-2015: PDF in English (GBT 22393-2015)

GB/T 22393-2015 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 17.160 J 04 GB/T 22393-2015 / ISO 17359.2011 Replacing GB/T 22393-2008, GB/T 20471-2006 Condition monitoring and diagnostics of machines - General guidelines (ISO 17359.2011, IDT) ISSUED ON. DECEMBER 31, 2015 IMPLEMENTED ON. JULY 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China. Table of Contents Foreword ... 3 Introduction ... 5 1 Scope ... 6 2 Normative references ... 6 3 Terms and definitions ... 6 4 Overview of condition monitoring procedure ... 7 5 Cost benefit analysis ... 9 6 Equipment audit ... 9 7 Reliability and criticality audit ... 10 8 Monitoring method ... 11 9 Data acquisition and analysis ... 15 10 Determine maintenance action ... 17 11 Review ... 18 12 Training ... 19 Annex A (informative) Examples of condition monitoring parameters ... 20 Annex B (informative) Matching fault(s) to measured parameter(s) or technique(s) ... 22 Annex C (informative) Typical information to be recorded when monitoring machine types shown in Annex A... 29 Annex D (informative) Overview of condition monitoring standards ... 32 Bibliography ... 35 Foreword This Standard is drafted according to the rules given in GB/T 1.1-2009. This Standard replaces GB/T 22393-2008 “Condition monitoring and diagnostics of machines - General guidelines” and GB/T 20471-2006 “Condition monitoring and diagnostics of machines - General guidelines on using performance parameters”. Main difference between this Standard and GB/T 22393-2008 are as follows. - In the Instruction, DESCRIBE the current situation of condition monitoring and diagnostics, as well as current international standards and corresponding China’s national standards; - In the Normative reference, ADD ISO 13379-1 and ISO 13381-1; - MODIFY and SUPPLEMENT “Figure 1 - Condition monitoring procedure flowchart”; - ADD “Figure 2 - System factors influencing condition monitoring”; - ADD “9.2 Quality of measurements”; - In “9.4 Diagnosis and prognosis”, ADD the contents of “The possibility of carrying out diagnosis depends on the machine type, configuration, and operating conditions.”, etc. - In “10 Determine maintenance action”, ADD the typical decision type; - Machines listed in Annex A and examples of fault(s) and relevant measurement parameter(s) or technique(s) of each machine type (9 types) given in Annex B. This Part of contents is identical to GB/T 20471-2006. Main differences between this Standard and GB/T 20471-2006 is as follows. - MERGE the Annex A, Annex B and Annex C of edition 2006 INTO this Standard, as the Annex A, Annex B and Annex C of this Standard, without content change. This Standard uses translation method to identically adopt ISO 17359.2011 “Condition monitoring and diagnostics of machines - General guidelines” (English version). China’s national standards that are identical to the international documents normatively referenced in this Standard are as follows. - GB/T 2298-2010 Mechanical vibration, shock and condition monitoring - Vocabulary (ISO 2041.2009, IDT) - GB/T 20921-2007 Condition monitoring and diagnostics of machines - Vocabulary (ISO 13372.2004, IDT) - GB/T 22394.1-2015 Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1. General guidelines (ISO 13379- 1.2012, IDT) - GB/T 27313.1-2009 Condition monitoring and diagnostics of machines - Prognostics - Part 1. General guidelines (ISO 13381-1.2004, IDT) This Standard is proposed and shall be under the jurisdiction of National Technical Committee on Mechanical Vibration, Shock and Condition Monitoring of Standardization Administration Of China (SAC/TC 53). Drafting organizations of this Standard. Zhengzhou Institute of Machinery, Xi'an Thermal Engineering Research Institute Co., Ltd., Wuhan University of Technology, Dongfang Electrical Machinery Co., Ltd. of Dongfang Electric Group. Main drafters of this Standard. Huang Runhua, Han Guoming, Zhang Xueyan, Yuan Chengqing, Chen Canglin and Wang Yicui. The previous edition of the standards replaced by this Standard are as follows. - GB/T 22393-2008; - GB/T 20471-2006. Condition monitoring and diagnostics of machines - General guidelines 1 Scope This Standard sets out guidelines for the general procedures to be considered when setting up a condition monitoring programme for machines and includes references to associated standards required in this process. This Standard applies to all machines. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2041 Mechanical vibration, shock and condition monitoring - Vocabulary ISO 13372 Condition monitoring and diagnostics of machines - Vocabulary ISO 13379-1 Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1. General guidelines ISO 13381-1 Condition monitoring and diagnostics of machines - Prognostics - Part 1. General guidelines 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 2041, ISO 13372 and the following apply. 3.1 equipment Machine or group of machines including all machine or process control components. ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.