HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (7 Dec 2024)

GB/T 20863.5-2007 PDF in English


GB/T 20863.5-2007 (GB/T20863.5-2007, GBT 20863.5-2007, GBT20863.5-2007)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 20863.5-2007English70 Add to Cart 0-9 seconds. Auto-delivery. Cranes -- Classification -- Part 5: Overhead travelling and portal bridge cranes Valid
Standards related to (historical): GB/T 20863.5-2007
PDF Preview

GB/T 20863.5-2007: PDF in English (GBT 20863.5-2007)

GB/T 20863.5-2007 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 53.020.20 J 80 GB/T 20863.5-2007 / ISO 4301-5:1991 Cranes - Classification - Part 5: Overhead travelling and portal bridge cranes (ISO 4301-5:1991, IDT) ISSUED ON: MARCH 21, 2007 IMPLEMENTED ON: AUGUST 01, 2007 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Working level ... 4 Foreword GB/T 20863 “Cranes - Classification” is divided into 5 parts: -- Part 1: General; -- Part 2: Mobile cranes; -- Part 3: Tower cranes; -- Part 4: Jib cranes; -- Part 5: Overhead travelling and portal bridge cranes. This Part is Part 5 of GB/T 20863. This Part is equivalent to ISO 4301-5:1991 "Cranes - Classification - Part 5: Overhead travelling and portal bridge cranes" (English version). This Part is equivalent to the translation of ISO 4301-5:1991. For convenience of use, this Part makes the following editorial changes: -- Change the term "this Part of ISO 4301" to "this Part of GB/T 20863"; -- Delete the foreword of ISO 4301-5:1991; -- For ISO 4301-1: 1986, which is cited in ISO 4301-5:1991, express as a national standard that has been equivalently transformed into our country. This Part was proposed by China Machinery Industry Federation. This Part shall be under the jurisdiction of National Technical Committee 227 on Hoisting Machinery of Standardization Administration of China (SAC/TC 227). The drafting organizations of this Part: Beijing Materials Handling Research Institute Co., Ltd., DHI DCW Group Co., Ltd. The drafters of this Part: Chen Xuan. Cranes - Classification - Part 5: Overhead travelling and portal bridge cranes 1 Scope This Part of GB/T 20863 specifies the classification of overhead travelling and portal bridge cranes according to the number of work cycles that are completed by the crane and its mechanism during the expected life and the load spectrum coefficient representing the nominal load state. 2 Normative references The terms in the following documents become the terms of this Part by reference to this Part of GB/T 20863. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this Part. However, parties to agreements that are based on this Part are encouraged to study whether the latest versions of these documents can be used. For undated references, the latest edition (including all amendments) applies to this document. GB/T 20863.1, Cranes - Classification - Part 1: General (GB/T 20863.1-2007, ISO 4301-1:1986, Cranes and lifting appliance - Classification - Part 1: General, IDT) 3 Working level The whole crane and its mechanism shall be classified according to GB/T 20863.1. The general principles of the classification of overhead travelling and portal bridge cranes according to the conditions of use are shown in Table 1. When the crane's service level and load status are unknown, the working level of the crane should be considered in accordance with the lowest working level of the same type of crane. ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.