GB/T 20808-2011 (GB/T 20808-2022 Newer Version) PDF English
GB/T 20808-2011 (GB/T20808-2011, GBT 20808-2011, GBT20808-2011)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 20808-2022 | English | 350 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Paper towel
| Valid |
| GB/T 20808-2011 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Facial tissue
| Obsolete |
| GB/T 20808-2006 | English | 359 |
Add to Cart
|
3 days
|
Toweling paper (including wet wipes)
| Obsolete |
Newer version: GB/T 20808-2022 Standards related to (historical): GB/T 20808-2022
PDF Preview
GB/T 20808-2011: PDF in English (GBT 20808-2011) GB/T 20808-2011
GB
ICS 85.060
Y 32
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Partly replacing GB/T 20808-2006
Facial tissue
纸巾纸
ISSUED ON. DECEMBER 30, 2011
IMPLEMENTED ON. JULY 01, 2012
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Classification ... 5
4 Requirements ... 5
5 Test Methods ... 7
6 Inspection Rules ... 10
7 Marking and Packaging ... 11
8 Transportation and Storage ... 12
Foreword
This Standard is drafted according to the provisions given in GB/T 1.1–2009.
This Standard partly replaces the “Facial tissue (including wet wipes)” in GB/T
20808–2006. Compared with GB/T 20808–2006, the main changes in this standard are as
follows.
- Delete the content of wet wipes;
- Delete the first-class quality grade;
- Add the portable fluorescent whitening agent and ash indexes;
- Adjust the indexes such as horizontal suction range, horizontal tensile index, vertical
wet tensile strength, flexibility, brightness, dirt count;
- Adjust the test methods of vertical wet tensile strength and flexibility;
- Adjust the provisions of packaged quantity.
Please note that some content in this document may involve patents. The issuing
organizations of this document are not responsible to identify these patents.
This Standard was proposed by China National Light Industry Association.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Paper Industry (SAC/TC 141).
Drafting organizations of this Standard. China National Pulp and Paper Research Institute,
Vinda International Holdings Limited, Jinhongye Paper Group Co., Ltd., Kimberly (China)
Co., Ltd., Hengan (China) Paper Co., Ltd., C&S Paper Co., Ltd., Shanghai Dongguan
Paper Co., Ltd., Little Nurse (Tianjin) Industrial Development Co., Ltd., and Dongguan
White Swan Paper Co., Ltd.
The chief drafting staffs of this Standard. Wang Zhen, Chen Xi, Qiu Wenlun, Gao Jun, Zuo
Jianbo, Zhang Hong, Li Difei, Gao Fengjuan, and Li Ping.
The previous edition replaced by this Standard is.
- Partly replacing GB/T 20808-2006.
Facial tissue
1 Scope
This Standard specifies the classifications, requirements, test method, inspection rules,
marking, packaging and storage of facial tissue.
This standard is applicable to various paper towel, paper napkin, paper handkerchief that
are used in daily life. It is not suitable for wet wipes, hand towel or kitchen tissue.
2 Normative References
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the dated documents so quoted, all the modifications
(including all corrections) or revisions made thereafter shall be applicable to this Standard.
GB 450 Paper and board - Sampling for testing and identification of machine and
cross direction wire side and felt side
GB/T 451.1 Paper and board - Determination of size and deviation
GB/T 461.1 Paper and board - Determination of capillary rise (Klemm method)
GB/T 462 Paper, board and pulp - Determination of moisture content of analytical
sample
GB/T 465.2 Paper and board - Determination of tensile strength after immersion in
water
GB/T 742 Fibrous raw material, Pulp, Paper and board - Determination of ash
GB/T 1541-1989 Paper and board - Determination of dirt
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1. Sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 7974 Paper, board and pulp - Measurement of brightness - Diff/Geometry
GB/T 8942 Paper-Determination of softness
GB/T 10739 Paper, board and pulps - Standard atmosphere for conditioning and
testing
GB/T 12914-2008 Paper and board - Determination of tensile properties
GB 15979 Hygienic standard for disposable sanitary products
GB/T 24328.5 Tissue paper and tissue products - Part 5. Determination of prammage
GB/T 27741-2001 Paper and board - Determination of migratable fluorescent
whitening agents
JJF 1070-2005 Rules of Metrological Testing for Net Quantity of Products in
Prepackages with Fixed Content
3 Classification
3.1 Facial tissue can be divided into paper towel, paper napkin, paper handkerchief, etc.
3.2 According to the quality, facial tissue can be divided into two grades - superior
products and qualified products.
3.3 Facial tissue can be divided into super-soft type and ordinary type.
3.4 Facial tissue can be divided into monolayer, bilayer and multilayer.
4 Requirements
4.1 Technical index of facial tissue shall be in accordance with Table 1 or contract’s
provisions.
4.3 Facial tissue shall be usually folded in flat or slicing. Its specification shall be in
accordance with provisions of contract. Dimensional deviation of specification shall not
exceed the nominal value by ±5mm; and the degree of skew shall not exceed 3mm; or be
in accordance with provisions of contract.
4.4 Facial tissue can be patter-embossed or pattern-stamped. Facial tissue in various
colors is also allowed. But harmful dyes shall not be used.
4.5 Facial tissue shall be clean and the puckers shall be even, fine and smooth. There
shall not be obvious dead-fold, incomplete, breakage, sand, hard block, raw pulp ball and
other paper defects.
4.6 There shall not be off-powder or lint desquamating from the facial tissue; and colorized
facial tissue shall not fade when being soaked.
4.7 Toxic and harmful raw materials shall not be used in facial tissue. While wood,
herbage, bamboo and other natural fibrous raw materials shall be used. Using any
recycled paper, paper presswork, paper product and other recycled fibrous substance as
the raw material must not be allowed; neither is deinking agent.
4.8 Hygienic index of facial tissue shall be in accordance with the provisions of GB 15979.
5 Test Methods
5.1 Sampling and treatment
Carry out sampling according to GB/T 450. Sample treatment and test standard
atmospheric condition shall be in accordance with GB/T 10739.
5.2 Quantification
The quantity shall be determined according to GB/T 24328.5. Express the result in
monolayer.
5.3 Brightness (whiteness)
Brightness (whiteness) shall be determined according to GB/T 7974.
5.4 Portable fluorescent whitening agent
Put the sample under ultraviolet lamp. Inspect whether there is fluorescence phenomenon
at wave length of 254nm and 365nm. If the sample has no fluorescence phenomenon
under ultraviolet lamp, then it can be determined that it does not contain portable
fluorescent whitening agent. If the sample has fluorescence phenomenon, then
determination of portable fluorescent whitening agent can be carried out according to
Chapter 5 of GB/T 27741-2011.
discovered in the first samples is more than or equal to the first unacceptable quantity,
then this batch shall be deemed as unacceptable. If the number of unqualified products
discovered in the first samples is between the first acceptable quantity and the first
unacceptable quantity, the second samples with the quantity provided in the scheme shall
be inspected; and the number shall be accumulated to the unqualified products
discovered in the first and second samples. If the accumulated number of unqualified
products is less than or equal to the second acceptable quantity, then this batch shall be
determined as acceptable; if the accumulated number of unqualified products is more than
or equal to the second acceptable quantity, then this batch shall be determined as
unacceptable.
6.5 If the demander has dispute over the product quality, it shall inform the supplier for
joint re-inspection within 3 months after receiving the goods; or entrust an jointly-agreed
inspection body to carry out the re-inspection. If result of the re-inspection is not in
accordance with this standard or provisions of contract, then this batch shall be
determined as unacceptable and the supplier shall be responsible; if result of the
re-inspection is in accordance with this standard or provisions of contract, then this batch
shall be determined as acceptable and the demander shall be responsible.
7 Marking and Packaging
7.1 Packaging and marking of product sales
Product marking shall include at least following contents.
- Product name and trademark;
- Product standard number;
- Main raw materials of the products;
- Production date (or serial number) and quality guarantee period, or batch number
and expiration date;
- Super-soft product shall be marked with product type; while ordinary product may be
exempted from marking with product type;
- Product specification;
- Product quantity (the number of sheets, groups, pulling-out or pieces);
- Product quality level and product conformance mark;
- Name, detailed address, etc. of manufacturing enterprise (or product responsible
organization).
7.2 Packaging and m...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|