Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 20740-2006 (GB/T20740-2006)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 20740-2006English110 Add to Cart 0-9 seconds. Auto-delivery. Adhesive -- Sampling Valid

Standards related to: GB/T 20740-2006

GB/T 20740-2006: PDF in English (GBT 20740-2006)

GB/T 20740-2006
ICS 83.180
G 38
GB/T 20740-2006 / ISO 15605:2000
Adhesive - Sampling
(ISO 15605:2000, IDT)
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
Introduction ... 4 
1 Scope ... 5 
2 Normative references ... 5 
3 Terms and definitions ... 6 
4 Safety ... 7 
5 Types of adhesive and related product ... 8 
6 Sampling equipment ... 9 
7 Types of sampling situation ... 10 
8 Methods of sampling ... 10 
9 Labelling and sealing of samples ... 14 
10 Sampling report ... 15 
11 Storage and use of samples ... 15 
This Standard is identical to ISO 15605:2000 "Adhesives - Sampling" (E).
This Standard is identical to the translation of ISO 15605:2000.
For ease of use, this Standard has made the following editorial changes:
a) CHANGE the word 'this International Standard' to 'this Standard';
b) Delete the foreword of the international standard.
This Standard was proposed by China Petroleum and Chemical Industry
This Standard shall be under the jurisdiction of National Technical Committee
185 on Adhesives of Standardization Administration of China.
Drafting organizations of this Standard: Shanghai Institute of Rubber Products,
Shanghai University of Engineering Science, Jiangsu Heisonglin Adhesive
Main drafters of this Standard: Li Xianquan, Chen Yuehui, Liu Pengkai.
Adhesive - Sampling
WARNING — Persons using this Standard should be familiar with normal
laboratory practice. This Standard does not purport to address all the
safety problems, if any, associated with its use. It is the responsibility of
the user to establish appropriate safety and health practices and to
ensure compliance with any international or national regulatory
1 Scope
This Standard specifies methods for sampling adhesives and related products,
in order to obtain uniform samples of convenient size which are adequately
representative of the product being sampled. The sample or samples so
obtained are suitable for examination and preparation prior to testing.
The methods are applicable to products which require the addition and mixing
in of catalysts or hardeners prior to their application, by sampling each
component separately. The methods are not applicable, however, to sampling
from a stream of adhesive (in this case the samples shall be taken in
accordance with ISO 8213). This Standard does not apply to sampling of animal
2 Normative references
The following documents contain provisions which, through reference in this
Standard, constitute provisions of this Standard. For the dated references, their
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest editions of these
documents are applicable. For undated reference documents, the latest
editions apply to this Standard.
ISO 472:1999 Plastics - Vocabulary
ISO 8213:1986 Chemical products for industrial use - Sampling techniques
- Solid chemical products in the form of particles varying from powders to
coarse lumps
ISO 15528:2000 Paints, varnishes and raw materials for paints and
varnishes - Sampling
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.