GB/T 20712-2006 (GB/T 20712-2022 Newer Version) PDF English
GB/T 20712-2006 (GB/T20712-2006, GBT 20712-2006, GBT20712-2006)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 20712-2022 | English | 199 |
Add to Cart
|
3 days
|
General quality for cooked sausage
| Valid |
| GB/T 20712-2006 | English | 120 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Ham sausage
| Valid |
Newer version: GB/T 20712-2022 Standards related to (historical): GB/T 20712-2022
PDF Preview
GB/T 20712-2006: PDF in English (GBT 20712-2006) GB/T 20712-2006
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 67.120.10
X 22
GB/T 0027-2014
Ham sausage
火腿肠
ISSUED ON. DECEMBER 11, 2006
IMPLEMENTED ON. JUNE 1, 2007
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Technical requirements ... 6
5 Inspection methods ... 7
6 Inspection rules ... 8
7 Labels and marks ... 10
8 Packaging, transport, storage ... 10
Ham sausage
1 Scope
This Standard specifies technical requirements, inspection methods, inspection
rules and labels, marks, packaging, transport, storage, etc.
This Standard is applicable to the production, distribution and sales of ham
sausage.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 191, Packaging and storage marks
GB 317, White granulated sugar
GB 1907, Food additive - Sodium nitrite
GB 2707, Hygienic standard for fresh (frozen) meat of livestock
GB 2720, Hygienic standard for sodium glutamate
GB 2726, Hygienic standard for cooked meat
GB 2733, National food safety standard - Fresh and frozen marine products
of animal origin
GB 2760, National Food Safety Standard - Standards for Uses of Food
Additives
GB/T 4789.17, Microbiological examination of food hygiene - Examination of
meat and meat products
GB/T 5009.3, Method for determination of moisture in foods
GB/T 5009.5, Method for determination of protein in foods
GB/T 5009.6, Method for determination of fat in foods
GB/T 5009.9, Method for determination of starch in foods
GB/T 5009.33, Determination of nitrite and nitrate in foods
GB/T 5009.44, Method for analysis of hygienic standard of meat and meat
products
GB 5461, Edible salt
GB/T 6388, Transport package shipping mark
GB 7718, General standard for the labeling of prepackaged foods
GB/T 8883, Edible wheat starch
GB/T 8884, Edible potato starch
GB/T 8885, Edible corn starch
GB/T 8967, Monosodium L-glutamate
GB 9687, Hygienic STANDARD for polyethylene products used as food
containers and table wares
GB 9688, Hygienic standard for polypropylene products used as food
containers and table wares
GB 9959.1, Fresh and frozen demi carcass pork
GB 9959.2, Fresh and frozen pork lean cuts
GB 16869, Fresh and frozen poultry product
GB/T 17030, Polyvinylidene chloride (PVDC) flat-film for food-packaging
GB/T 17238, Fresh and frozen beef, cuts
GB 19303, Hygienic practice of cooked meat and meat - Products factory
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 ham sausage
autoclaved ham sausage
meat enema product that is made from that the main raw materials are fresh or
frozen meat, poultry and fish which are marinated, stirred, mashed (or
emulsified), poured into plastic casings, and sterilized by high temperature
sterilization
4 Technical requirements
4.1 Raw materials
Raw meat shall meet the requirements of GB 2707, GB 9959.1, GB 9959.2, GB
16869, GB 2733 or GB/T 17238.
4.2 Accessories
4.2.1 Water. in accordance with corresponding health standards.
4.2.2 Salt. in accordance with GB 5461.
4.2.3 White sugar. in accordance with GB 317.
4.2.4 Starch. in accordance with GB/T 8883, GB/T 8884 or GB/T 8885.
4.2.5 MSG. in accordance with GB/T 8967 and Gb 2720.
4.2.6 Casing. in accordance with GB 9687, GB 9688 or GB/T 17030.
4.2.7 Food additives
4.2.7.1 Sodium nitrite. in accordance with GB 1907.
4.2.7.2 The quality of food additives shall comply with the corresponding
standards and relevant regulations.
4.2.7.3 The variety, amount and residue of food additives shall meet the
requirements of GB 2760.
4.2.8 Other accessories shall comply with the relevant national standards.
4.3 Quality indicator
4.3.1 Sensory requirements
It shall comply with the provisions of Table 1.
Type inspection shall be carried out at least once a year. Type inspection shall
be performed in one of the following situations.
a) great changes in main raw accessories or key process;
b) production resumed after long-term discontinued production;
c) great difference between exit-factory inspection results and previous type
inspection results;
d) required by national quality supervision organization.
6.3.3 Type inspection items
It shall include all items specified in Clause 4.
6.4 Determination rules
6.4.1 Determination and reinspection of exit-factory inspection
6.4.1.1 When all exit-factory inspection items meet the requirements of this
Standard, this batch of products shall be accepted.
6.4.1.2 Should one of exit-factory inspection items (except for the total
number of colonies and coliforms) fail to meet this Standard, it shall double
sampling randomly for the reinspection of this item. Should it still fail to meet
this Standard, it shall be rejected.
6.4.1.3 Should one of the total number of colonies and coliforms fail to meet
this Standard, it shall be rejected and reinspection shall not be performed.
6.4.2 Determination and reinspection of type inspection
6.4.2.1 When all type inspection items meet the requirements of this Standard,
this batch of products shall be accepted.
6.4.2.2 When type inspection items (not exceeding three items, excluding
total number of colonies, coliforms and pathogenic bacteria) do not meet this
Standard, it shall double sampling for reinspection. Should one item in
reinspection fail to meet this Standard, it shall be rejected. When more than
three items fall to meet this Standard, the reinspection shall not be performed
and it shall be determined as rejected.
6.4.2.3 Should one of the total number of colonies, coliforms and pathogenic
bacteria fail to meet the requirements of this Standard, it shall be rejected. The
reinspection shall not be performed.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|