GB/T 19515-2004 PDF in English
GB/T 19515-2004 (GB/T19515-2004, GBT 19515-2004, GBT19515-2004)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 19515-2004 | English | 140 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Road vehicles -- Recyclability and recoverability -- Calculation method
| Obsolete |
| GB/T 19515-2023 | English | 305 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Road vehicles - Recyclability and recoverability rate - Requirement and calculation method
| Valid |
Newer version: GB/T 19515-2023 Standards related to: GB/T 19515-2023
PDF Preview
GB/T 19515-2004: PDF in English (GBT 19515-2004) GB/T 19515-2004
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 40
GB/T 19515-2004/ISO 22628.2002
Road vehicles - Recyclability and recoverability -
Calculation method
(ISO 22628.2002, IDT)
[This standard is replaced by GB/T 19515-2015]
ISSUED ON. MAY 17, 2004
IMPLEMENTED ON. NOVEMBER 1, 2004
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Variables and their symbols ... 6
5 Calculation method ... 7
5.1 General ... 7
5.2 Materials breakdown ... 7
5.3 Determination of partial masses mP, mD, mM, mTr and mTe ... 8
5.4 Calculation of recyclability/recoverability rate ... 10
Annex A (normative) Data presentation ... 11
Annex B (informative) Calculation method ... 12
Foreword
This Standard equivalently adopts ISO 22628.2002 “Road vehicles -
Recyclability and recoverability - Calculation method” (English version).
Annex A of this Standard is normative.
Annex B of this Standard is informative.
This Standard was proposed by China Association of Automobile
Manufacturers.
This Standard shall be under the jurisdiction of National Technical Committee
on Automobile of Standardization Administration of China.
The drafting organizations of this Standard. China Automotive Technology and
Research Center, Volkswagen (China) Investment Co., Ltd.
Main drafters of this Standard. Wu Wei, Feng Xingye, Jiao Zhiyang, Guo Miao,
Liu Xianghai.
This Standard was issued for the first time.
Road vehicles - Recyclability and recoverability -
Calculation method
1 Scope
This Standard specifies a method for calculating the recyclability rate and the
recoverability rate of a new road vehicle, each expressed as a percentage by
mass (mass fraction in percent) of the road vehicle, which can potentially be.
- recycled, reused or both (recyclability rate), or
- recovered, reused or both (recoverability rate).
The calculation is performed by the vehicle manufacturer when a new vehicle
is put on the market.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 3730.2-1996, Road vehicles - Masses - Vocabulary and codes (idt ISO
1176.1990)
3 Terms and definitions
For the purposes of this Standard, terms and definitions given in GB/T 3730.2-
1996 and the following apply (see Figure 1).
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|