GB/T 19017-2020 PDF in English
GB/T 19017-2020 (GB/T19017-2020, GBT 19017-2020, GBT19017-2020)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 19017-2020 | English | 195 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Quality management. Guidelines for configuration management
| Valid |
GB/T 19017-2008 | English | 554 |
Add to Cart
|
3 days
|
Quality management systems -- Guidelines for configuration management
| Obsolete |
GB/T 19017-1997 | English | 719 |
Add to Cart
|
3 days
|
Quality management--Guidelines for configuration management
| Obsolete |
Standards related to (historical): GB/T 19017-2020
PDF Preview
GB/T 19017-2020: PDF in English (GBT 19017-2020) GB/T 19017-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 03.120.10
A 00
GB/T 19017-2020 / ISO 10007:2017
Replacing GB/T 19017-2008
Quality management - Guidelines for configuration
management
(ISO 10007:2017, IDT)
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 6
4 Configuration management responsibilities ... 7
5 Configuration management process ... 7
Annex A (informative) Structure and content of the configuration management
plan ... 15
Bibliography ... 18
Foreword
This Standard is one of GB/T 19000 series.
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 19017-2008 " Quality management systems -
Guidelines for configuration management".
Compared with GB/T 19017-2008, in addition to editorial modifications, the
main technical changes are as follows:
- in the scope of this Standard, deleted the description of "not intended for
certification purpose" in GB/T 19017-2008;
- in the terms of this Standard, retained 5 terms in GB/T 19017-2008 and
modified the definitions of these terms accordingly; deleted four terms:
change control, concession, configuration management, management
organization;
- in the contents of this Standard, modified "product configuration
information", no longer limited to products, but applicable to the
configuration of products or services; expanded the focus of configuration
management activities from customers in the previous version to
"customers and related parties"; at the same time, the meaning of
"supplier" has been expanded to include past suppliers and external
providers; in addition, the documented documents in the process of
configuration management are collectively referred to as documented
information, which is consistent with the definition of documented
information in GB/T 19000-2016.
This Standard uses translation method to identically adopt ISO 10007:2017
"Quality management - Guidelines for configuration management".
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee on Quality Management and Quality Assurance of
Standardization Administration of China (SAC/TC 151).
The drafting organizations of this Standard: China National Institute of
Standardization, the 14th Research Institute of China Electronics Technology
Group Corporation, Shanghai Jiezhineng Software Technology Co., Ltd., the
Second Research Institute of China Aerospace Science and Industry
Corporation, China Aviation Industry Corporation, Shenyang Aircraft Design
Institute of Aviation Industry, Beijing Institute of Electronic Engineering.
Quality management - Guidelines for configuration
management
1 Scope
This Standard gives guidelines for configuration management within an
organization.
This Standard applies to all stages of supporting products and services from
concept to disposal.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 19000-2016, Quality management systems - Fundamentals and
vocabulary (ISO 9000:2015, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T
19000-2016 as well as the followings apply.
3.1 configuration
the interrelated functional characteristics and physical characteristics of the
product or service specified in the configuration information (3.5)
3.2 configuration baseline
the approved configuration information (3.5) that establishes the characteristics
of the product or service at a certain point in time serves as a reference for
activities throughout the life cycle of the product or service
3.3 configuration item
an object within a certain configuration (3.1) that satisfies the end-use function
3.4 configuration status accounting
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|