Powered by Google www.ChineseStandard.net Database: 189759 (16 Jun 2024)

GB/T 18874.5-2002 PDF in English


GB/T 18874.5-2002 (GB/T18874.5-2002, GBT 18874.5-2002, GBT18874.5-2002)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 18874.5-2002English190 Add to Cart 0-9 seconds. Auto-delivery. Cranes -- Information to be provided -- Part 5: Overhead travelling cranes and portal bridge cranes Valid

PDF Preview

Standards related to: GB/T 18874.5-2002

GB/T 18874.5-2002: PDF in English (GBT 18874.5-2002)

GB/T 18874.5-2002
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 53.020.20
J 80
eqv ISO 9374-5:1991
Cranes - Information to be provided - Part 5: Overhead
travelling cranes and portal bridge cranes
ISSUED ON: NOVEMBER 19, 2002
IMPLEMENTED ON: JUNE 01, 2003
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine
Table of Contents
Foreword ... 3 
ISO Foreword ... 4 
1 Scope ... 5 
2 Normative references ... 5 
3 Information to be provided by the buyer when consulting or ordering ... 5 
4 Information to be provided by the manufacturer ... 5 
Annex A (standard) The format of the information that the buyer shall provide
when consulting or ordering ... 11 
Foreword
This Standard equivalently adopts ISO 9374-5:1991 “Cranes - Information to
be provided - Part 5: Overhead travelling cranes and portal bridge cranes”.
The differences between this Standard and ISO 9374-5:1991 are as follows:
- In Chapter 2, use GB/T 17908-1999 (idt ISO 7363:1986) to replace ISO
7363:1986 used as reference in ISO 9374-5:1991;
- In Annex A, add postal code, e-mail box, sea side cantilever pitching time,
wind conditions (maximum wind speed in working state, maximum wind
speed in non-working state), humidity conditions (relative humidity); delete
"C) Radio" in the controller column.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Hoisting Machinery of Standardization Administration of China.
The drafting organizations of this Standard: Beijing Lifting and Conveying
Machinery Research Institute.
Main drafters of this Standard: Zhao Chunhui.
Cranes - Information to be provided - Part 5: Overhead
travelling cranes and portal bridge cranes
1 Scope
This Standard specifies the information to be provided:
a) Provided by the buyer when consulting or ordering overhead travelling
cranes and portal bridge cranes;
b) Provided by the manufacturer when contracting or supplying overhead
travelling cranes and portal bridge cranes.
2 Normative references
The following standards contain provisions which, through reference in this
Standard, constitute provisions of this Standard. At the time of publication, the
editions indicated are valid. All standards are subject to revision. The parties
who are using this Standard shall explore the possibility of using the latest
version of the following standards.
GB/T 17908-1999, Cranes and Lifting Appliances - Technical Characteristics
and Acceptance Documents (idt ISO 7363:1986)
3 Information to be provided by the buyer when
consulting or ordering
The buyer shall provide the relevant information given in Annex A, so that the
crane manufacturer can sell or provide the most suitable overhead travelling
cranes or portal bridge cranes and equipment that meet the working
requirements and conditions.
4 Information to be provided by the manufacturer
4.1 Technical information
The information provided by the manufacturer shall include:
a) Technical data and test certificate that meet the requirements of GB/T
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.