GB/T 18384.2-2015 PDF English (GB/T 18384.2-2001: Older version)
Search result: GB/T 18384.2-2015 (GB/T 18384.2-2001 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 18384.2-2015 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures
| Obsolete |
| GB/T 18384.2-2001 | English | 199 |
Add to Cart
|
2 days
|
Safety requirements of electric vehicles -- Part 2: Functional safety and fault protection
| Obsolete |
PDF Preview: GB/T 18384.2-2015
GB/T 18384.2-2015: PDF in English (GBT 18384.2-2015) GB/T 18384.2-2015
GB
ICS 43.020
T 40
National Standard
of the People’s Republic of China
Replacing GB/T 18384.2-2001
Electrically propelled road vehicles –
Safety specifications - Part 2. Vehicle operational
safety means and protection against failures
(ISO 6469-2.2009, MOD)
ISSUED ON. MAY 15, 2015
IMPLEMENTED ON. OCTOBER 1, 2015
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of People's Republic of China;
Standardization Administration of China.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 7
4 Operational safety ... 7
5 Failure protection ... 9
6 User manual ... 9
7 Mark ... 9
8 Emergency response ... 10
Foreword
GB/T 18384 "Electrically propelled road vehicles - Safety specifications" is
divided into three parts.
- Part 1. On-board rechargeable energy storage system (REESS);
- Part 2. Vehicle operational safety means and protection against failures;
- Part 3. Protection of persons against electric shock.
This Part is Part 2 of GB/T 18384.
This part was drafted according to the given rules of GB/T 1.1-2009.
This Part replaces GB/T 18384.2-2001 "Electric vehicles - Safety specification
- Part 2. Functional means and protection against failures". Compared with
GB/T 18384.2-2001, in addition to editorial changes, the main technical
changes are as follows.
- Modified the scope of the standard (see Chapter 1 of Edition 2001);
- Deleted the terms and definitions defined in GB/T 19596 (see Chapter 3
of Edition 2001);
- Added the definition of "driving-enabled mode" (see 3.1);
- Added the definition of "rechargeable energy storage system" (see 3.2);
- Added the definition of "voltage class B electric circuits" (see 3.3);
- Deleted the requirements for the main switch (see 4.5 of Edition 2001);
- Modified the requirements for electromagnetic compatibility (see 4.6 of
Edition 2001);
- Modified the requirements for failure protection (see Chapter 5 of Edition
2001);
- Added the requirements for vehicle mark (see Chapter 7);
- Added the requirements for emergency response (see Chapter 8).
Electrically propelled road vehicles –
Safety specifications -
Part 2. Vehicle operational safety means and
protection against failures
1 Scope
This Part of GB/T 18384 specifies the requirements for safe operation and
failure protection against the specific danger of electrically propelled road
vehicles, so as to protect the safety of people inside and outside the vehicle.
This Part is applicable to the electrically propelled road vehicles of which the
maximum operating voltage of the drive system is class-B voltage. The electric
motorcycle and electric mopeds may refer to this Part.
This Part is not applicable to off-road vehicle, e.g. material handling vehicle and
forklift.
This Part is not applicable to the internal combustion engine system of hybrid
electric vehicle.
This Part is not applicable to the guidance of electric vehicle’s assembly,
maintenance and repair.
2 Normative references
The following documents are essential to the application of this document. For
dated references, only the dated version is applicable to this document. For
undated references, its latest version (including all amendments) is applicable
to this document.
GB/T 18384.1 Electrically propelled road vehicles - Safety specifications - Part
1. On-board rechargeable energy storage system (REESS) (GB/T 18384.1-
2015, ISO 6469.2009, MOD)
GB/T 19596 Terminology of electric vehicles (GB/T 19596-2004, ISO
8713.2002, NEQ)
8 Emergency response
The manufacturer shall provide the information about vehicle accident handling
to the safety personnel and emergency responders.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|