GB/T 17888.1-2020 PDF in English
GB/T 17888.1-2020 (GB/T17888.1-2020, GBT 17888.1-2020, GBT17888.1-2020)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 17888.1-2020 | English | 215 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Safety of machinery. Permanent means of access to machinery -- Part 1: Choice of fixed means and general requirements of access
| Valid |
| GB 17888.1-2008 | English | 519 |
Add to Cart
|
3 days
|
[GB/T 17888.1-2008] Safety of machinery -- Permanent means of access to machinery -- Part 1: Choice of a fixed means of access between two levels
| Obsolete |
| GB 17888.1-1999 | English | 239 |
Add to Cart
|
2 days
|
Safety of machinery--Permanent means of access to machines and industrial plants-- Part 1: Choice of a fixed means of access between two levels
| Obsolete |
Standards related to (historical): GB/T 17888.1-2020
PDF Preview
GB/T 17888.1-2020: PDF in English (GBT 17888.1-2020) GB/T 17888.1-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.110
J 09
GB/T 17888.1-2020 / ISO 14122-1:2016
Replacing GB/T 17888.1-2008
Safety of Machinery – Permanent Means of Access to
Machinery – Part 1: Choice of Fixed Means and General
Requirements of Access
(ISO 14122-1:2016, IDT)
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 7
2 Normative References ... 7
3 Terms and Definitions ... 8
4 Significant Hazards ... 10
5 General Requirements for Design and Construction ... 10
6 Requirements for the Selection of the Fixed Means of Access ... 11
6.1 General ... 11
6.2 Preferred means of access ... 11
6.3 Selection of the means of access ... 12
6.4 Selection between a ramp or a stair ... 13
6.5 Selection between stepladder and fixed ladder ... 14
7 General Requirements for Information for Use ... 14
7.1 Instruction handbook ... 14
7.2 Warnings ... 15
Annex A (Informative) Examples for the Changes in the Machine or System to Make
Better Access Possible ... 16
Annex B (Informative) Significant Technical Changes between this Part and the GB/T
17888.1-2008 ... 17
Bibliography ... 18
Foreword
GB/T 17888 Safety of Machinery – Permanent Means of Access to Machinery constitutes the
following four parts:
--- Part 1: Choice of a Fixed Means and General Requirements of Access;
--- Part 2: Working Platforms and Walkways;
--- Part 3: Stairs, Stepladders and Guard-Rails;
--- Part 4: Fixed Ladders.
This Part is Part 1 of GB/T 17888.
This Part was drafted as per the rules specified in GB/T 1.1-2009.
This Part replaced GB/T 17888.1-2008 Safety of Machinery – Permanent Means of Access to
Machinery – Part 1: Choice of a Fixed Means of Access between Two Levels. Compared with
GB/T 17888.1-2008, the major technical changes of this Part can refer to Annex B.
This Part used the translation method to equivalently adopt ISO 14122-1:2016 Safety of
Machinery – Permanent Means of Access to Machinery – Part 1: Choice of Fixed Means and
General Requirements of Access.
The Chinese documents that have consistent correspondence with the international documents
normatively cited in this Part are as follows:
--- GB/T 15706-2012 Safety of Machinery - General Principles for Design - Risk
Assessment and Risk Reduction (ISO 12100:2010, IDT)
--- GB/T 17888.3-2020 Safety of Machinery - Permanent Means of Access to Machinery -
Part 3: Stairs, Stepladders and Guard-Rails (ISO 14122-3:2016, IDT)
--- GB/T 17888.4-2020 Safety of Machinery - Permanent Means of Access to Machinery -
Part 4: Fixed Ladders (ISO 14122-4:2016, IDT)
This Part was proposed by and under the jurisdiction of National Technical Committee on
Mechanical Safety of Standardization Administration of China (SAC/TC 208).
Drafting organizations of this Part: Tianjin Jinmao Group Co., Inc.; Jiangsu Guolang Machinery
Manufacturing Co., Ltd.; Ningguo Dongfang Wear-Resistant Materials Co., Ltd.; Wright
Housewares Co., Ltd. Foshan; Zhengzhou Guizhu Industry and Trading Co., Ltd.; China
Productivity Center for Machinery; Shanghai Ruiju Metal Products Co., Ltd.; Shenyang
Yongpan Metal Products Co., Ltd.; Zhejiang Aopeng Industry and Trading Co., Ltd.; Ningbo
Vichnet Technology Co., Ltd.; Nanjing Forestry University/National-Provincial Joint
Engineering Research Center of Biomaterials for Electromechanical Product Packaging;
Safety of Machinery – Permanent
Means of Access to Machinery – Part 1: Choice
of Fixed Means and General Requirements of Access
1 Scope
This Part of GB/T 17888 gives general requirements for access to stationary machines and
guidance about the correct choice of means of access, when necessary, access to the stationary
machine is not possible directly from the ground level or from a floor.
This Part is applicable to permanent means of access which are a part of a stationary machine,
and also to non-powered adjustable parts (e.g., foldable, slidable) and movable parts of fixed
means of access.
NOTE 1: “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts,
welding) that they can only be removed by the use of tools.
This Part specifies minimum requirements that also apply when the same means of access is
required as the part of the building or civil construction (e.g., working platforms, walkways,
ladders) where the machine is installed, on condition that the main function of that part of the
construction is to provide a means of access to the machine.
NOTE 2: Where no local regulation or standards exist, this part of ISO 14122 can be used for means of
access which are outside the scope of the standard.
It is intended that this Part of GB/T 17888 be used with a relevant access-specific part of GB/T
17888.
The GB/T 17888 series as a whole is applicable to both stationary and mobile machinery where
fixed means of access are necessary. It is not applicable to powered means of access such as
lifts, escalators, or other devices specially designed to lift persons between two levels.
For the significant hazards covered by this Part, see Clause 4.
2 Normative References
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document; for the
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|