GB/T 16739.1-2023 PDF in English
GB/T 16739.1-2023 (GB/T16739.1-2023, GBT 16739.1-2023, GBT16739.1-2023)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 16739.1-2023 | English | 245 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Operating conditions for automobile maintenance and repair trade - Part 1: The enterprise for automobile maintenance and repair
| Valid |
| GB/T 16739.1-2014 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Certification requirements for motor vehicle maintenance and repair enterprise -- Part 1: for motor vehicle maintenance and repair
| Obsolete |
| GB/T 16739.1-2004 | English | 319 |
Add to Cart
|
3 days
|
Certification requirements for motor maintenance and repair enterprise -- Part 1: for motor vehicle maintenance and repair
| Obsolete |
| GB/T 16739.1-1997 | English | 239 |
Add to Cart
|
2 days
|
Requirements for industry of vehicle maintenance and repair being managed--Part 1: for the first kind of enterprises of vehicle maintenance and repair
| Obsolete |
Standards related to (historical): GB/T 16739.1-2023
PDF Preview
GB/T 16739.1-2023: PDF in English (GBT 16739.1-2023) GB/T 16739.1-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.180
CCS R 16
Replacing GB/T 16739.1-2014
Operating conditions for automobile maintenance and
repair trade - Part 1: The enterprise for automobile
maintenance and repair
ISSUED ON: SEPTEMBER 07, 2023
IMPLEMENTED ON: APRIL 01, 2024
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 6
1 Scope ... 7
2 Normative references ... 7
3 Terms and definitions ... 7
4 Organizational management conditions ... 8
5 Personnel conditions ... 10
6 Facility conditions ... 12
7 Equipment conditions ... 13
Bibliography ... 17
Operating conditions for automobile maintenance and
repair trade - Part 1: The enterprise for automobile
maintenance and repair
1 Scope
This document stipulates the organizational management, personnel, facilities and
equipment conditions for the enterprise for automobile maintenance and repair.
This document applies to the business registration and management of Class I and Class
II enterprises for automobile maintenance and repair (hereinafter referred to as
“enterprises”).
2 Normative references
The following documents are referred to in the text in such a way that some or all of
their content constitutes requirements of this document. For dated references, only the
version corresponding to that date is applicable to this document; for undated references,
the latest version (including all amendments) is applicable to this document.
GB/T 5624, Motor vehicle maintenance and repair terms
GB/T 18344, Specification for the inspection and maintenance of motor vehicle
JT/T 155, Automotive lift
JT/T 324, Automotive spray booth
JT/T 1132.2, Vehicle maintenance and repair electronic archives system - Part 2:
Data collection technical requirements
3 Terms and definitions
Terms and definitions determined by GB/T 5624 and the following ones are applicable
to this document.
3.1
the enterprise for automobile maintenance and repair
4.2.1 There shall be standardized business workflow, public business acceptance
procedures, service commitments and user complaint acceptance procedures.
4.2.2 The business license, motor vehicle maintenance and repair signboard,
maintenance and repair quality guarantee period, price of commonly used accessories,
man-hour norm and man-hour rate for common events in operation shall be clearly
displayed in a conspicuous position.
4.2.3 Man-hour rate filing, automobile maintenance and repair contracts, automobile
maintenance and repair expense settlement lists, automobile maintenance and repair
records and statistical information submission systems shall be established and
implemented.
4.2.4 The maintenance and repair process, parts management, cost settlement, and
maintenance and repair files shall be managed electronically, and the electronic
maintenance and repair data records of the automobiles maintained shall be filled in
and uploaded in accordance with the requirements of JT/T 1132.2.
4.3 Quality management
4.3.1 Automobile maintenance and repair quality commitment, inspection, factory
completion certificate management, automobile maintenance and repair file
management, measurement management, equipment management, parts management
and personnel training systems shall be established and implemented.
4.3.2 The automobile maintenance and repair file shall include the maintenance contract
(repair order), factory entry, process, and completion inspection records, ex-factory
certificate stubs, and maintenance and repair settlement lists.
4.3.3 The parts management system shall stipulate parts procurement, inspection and
acceptance, warehouse management, information traceability, parts registration and
ledger, and claim requirements.
4.3.4 There shall be complete and effective maintenance technical data and process
documents for the vehicle model being repaired.
4.4 Safety management
4.4.1 A safety production management system that is suitable for the maintenance and
repair work content shall be established and implemented, and corresponding safety
protection measures shall be in place.
4.4.2 Safe operating procedures for the use of electromechanical equipment shall be
formulated and clearly displayed at the corresponding work stations or equipment.
4.4.3 Corresponding safety protection measures and facilities shall be provided for the
use and storage of toxic, flammable, explosive items, dust, corrosives, pollutants,
pressure vessels, etc. Safety protection facilities shall have be provided with obvious
warning and prohibition signs.
4.4.4 Production plants and parking lots shall meet various requirements for production
safety and fire protection. The location of safety and fire protection facilities shall
clearly indicate the management requirements and operation specifications of the
facilities.
4.4.5 There shall be an emergency plan for production safety accidents.
4.5 Environmental protection management
4.5.1 A management system – which meets environmental protection requirements –
for centralized collection, classified storage and effective processing of waste oil, waste
liquid, exhaust gas, waste water, used batteries, scrap tires, asbestos-containing waste
and hazardous waste and for keeping the environment tidy shall be established and
implemented.
4.5.2 The storage area for hazardous substances shall be clearly defined, and isolation
and control measures shall comply with environmental protection requirements.
5 Personnel conditions
5.1 There shall be technical personnel in charge, management personnel for safety
production, quality inspection personnel, business reception personnel, and
maintenance and repair technicians engaged in machine repair, electrical appliances,
sheet metal (body repair) and coating (body coating).
5.2 Technical person in charge shall be familiar with the automobile maintenance and
repair business, master automobile maintenance and repair as well as related policies,
regulations and technical specifications, have a college degree or above in automobile
maintenance and repair or related majors, or have an intermediate or above professional
technical title in automobile maintenance and repair or related majors.
5.3 Management personnel for safety production shall be familiar with national safety
production laws and regulations, and have knowledge of automobile maintenance and
repair safety production operations and safety production management capabilities.
5.4 Quality inspector personnel shall be familiar with automobile maintenance, repair
and inspection operation specifications, master the relevant technologies of automobile
maintenance and repair fault diagnosis and quality inspection, be familiar with
automobile maintenance and repair service charging standards and relevant policies,
regulations and technical specifications, have a high school degree or above, and hold
a motor vehicle driving license suitable for the vehicle model being repaired.
6 Facility conditions
6.1 Reception room (including customer lounge)
6.1.1 There shall be a reception room. The area of the reception room for Class I
enterprises shall not be less than 80 m2, and the area of the reception room for Class II
enterprises shall not be less than 20 m2.
6.1.2 The reception room shall be clean and bright, and shall be provided with facilities
for customers to rest.
6.2 Parking lot
6.2.1 The parking lot area of Class I enterprises shall not be less than 200 m2, and the
parking lot area of Class II enterprises shall not be less than 150 m2.
6.2.2 The leased parking lot shall be provided with a written contract and the lease term
shall be no less than 1 year.
6.2.3 The parking lot ground shall be smooth and solid, and the parking lot markings
shall be clear.
6.3 Production plant and site
6.3.1 The area of the production plant shall be able to meet the work station layout,
production process and normal operations of the equipped equipment, and be
compatible with its business operations. The area of the production plant of Class I
enterprises that are only engaged in the maintenance and repair of single operating item
of small vehicle, large and medium passenger vehicle and heavy-duty goods vehicle
shall be no less than 800 m2, and the area of the production plant of Class II enterprises
shall be no less than 200 m2.
6.3.2 For enterprises engaged in the maintenance and repair of multiple operating items
of small vehicle, large and medium passenger vehicle and heavy-duty goods vehicle,
the area of the production plant shall be no less than the cumulative value of the area of
the production plant of the enterprise engaged in the maintenance and repair of a single
operating item.
6.3.3 There shall be pre-inspection station, assembly maintenance room or isolation
station in the production plant, which shall be suitable for the vehicle model repaired.
The area of the assembly maintenance room or isolation station of Class I and II
enterprises shall not be less than 20 m2.
6.3.4 The leased production plant shall be provided with a written contract and the lease
term shall be no less than 1 year.
6.3.5 The floor of the production plant shall be flat and solid.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|