GB/T 16622-2022 PDF in English
GB/T 16622-2022 (GB/T16622-2022, GBT 16622-2022, GBT16622-2022)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 16622-2022 | English | 260 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Size designation, dimensions and load capacity for pressed-on solid tyres
| Valid |
| GB/T 16622-2009 | English | 519 |
Add to Cart
|
3 days
|
Size designation, dimensions and load capacity for pressed-on solid tyres
| Obsolete |
| GB/T 16622-1996 | English | 279 |
Add to Cart
|
3 days
|
Series of pressed-on solid tyres
| Obsolete |
Standards related to (historical): GB/T 16622-2022
Preview PDF (Powered by Google. Reload if blank, scroll for next page)
GB/T 16622-2022: PDF in English (GBT 16622-2022) GB/T 16622-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.99
CCS G 41
Replacing GB/T 16622-2009
Size designation, dimensions and load capacity for pressed-
on solid tyres
[ISO 10500:1991, Industrial tyres and rims - Cylindrical and conical base rubber solid
tyres (metric series) - Designation, dimensions and marking, NEQ]
ISSUED ON: OCTOBER 12, 2022
IMPLEMENTED ON: OCTOBER 12, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Expression of tyre size designation and schematic diagram of dimensions of tyre and
rim assembly components ... 5
5 Size designation, dimensions, rate and load capacity for tyres ... 7
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1: Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 16622-2009, Size designation dimensions and load
capacity for pressed-on solid tyres. Compared with GB/T 16622-2009, in addition to
structural adjustments and editorial changes, the main technical changes are as follows:
-- Change the scope of application (see Chapter 1; Chapter 1 of the 2009 edition);
-- Change the expression of tyre size designation (see 4.1, 4.2; Chapter 4 of the 2009
edition);
-- Add a schematic diagram of the components and dimensions of the tyre and rim
assembly (see Figure 1);
-- Add new tyre dimension specifications to tyre size designation (see Table 1 and
Table 2);
-- Add the load of other industrial trucks at rates of 6 km/h and 10 km/h (see Table 1
and Table 2);
-- Add size designations for some tyres (see Table 1 and Table 2);
-- Change the load capacity of some size designations, and recalculate the load
capacity (see Table 1, Table 2; Table 2, Table 3 of the 2009 edition).
This document was drafted with reference to ISO 10500:1991 Industrial tyres and rims
- Cylindrical and conical base rubber solid tyres (metric series) - Designation,
dimensions and marking, while the degree of consistency is non-equivalent.
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document was proposed by China Petroleum and Chemical Industry Federation.
This document shall be under the jurisdiction of National Technical Committee on Tyres
and Rims of Standardization Administration of China (SAC/TC 19).
Drafting organizations of this document: Zhongce Rubber Group Co., Ltd., Guizhou
Tyre Co., Ltd., Xiamen Zhengxin Rubber Industry Co., Ltd., Exmile Special Tyre Co.,
Ltd., Xuzhou Xulun Rubber Co., Ltd., Shandong Linglong Tyre Co., Ltd., Tianjin
Wanda Tyre Group Co., Ltd., Sailun Group Co., Ltd., Beijing Research and Design
Institute of Rubber Industry Co., Ltd., Zhejiang Fomay Industrial Machinery Co., Ltd.,
Jiangsu Donghao Rubber Co., Ltd., Michelin (China) Investment Co., Ltd.
Size designation, dimensions and load capacity for pressed-
on solid tyres
1 Scope
This document specifies the expression for size designation of pressed-on solid tyres,
as well as the size designation, dimensions, rate and load capacity for tyres.
This document applies to the new pressed-on solid tyres used on counterbalanced trucks
with mast and other industrial trucks.
2 Normative references
The following documents are normatively referenced in this document and are
indispensable for its application. For dated references, only the version corresponding
to that date is applicable to this document; for undated references, the latest version
(including all amendments) is applicable to this document.
GB/T 6326, Tyre terms and definitions
GB/T 16623, Technical specification of pressed-on solid tyres
3 Terms and definitions
Terms and definitions determined by GB/T 6326 and GB/T 16623 are applicable to this
document.
4 Expression of tyre size designation and schematic diagram
of dimensions of tyre and rim assembly components
4.1 Tyre size designation expressed in imperial system
An example of tyre size designation expressed in imperial system is shown as follows:
2 – rim overall diameter;
3 – section width;
4 – rubber carcass;
5 – steel ring;
6 – rim.
Figure 1 – Schematic diagram of components and dimensions of the pressed-on
solid tyre and rim assembly
5 Size designation, dimensions, rate and load capacity for
tyres
5.1 For tyres designed and produced according to this document, their requirements,
test methods and marking shall comply with the provisions of GB/T 16623.
5.2 The correspondence between tyre size designation, new tyre dimensions, rate and
load capacity shall comply with the provisions in Table 1 and Table 2.
5.3 The fit dimensions of tyre and rim should comply with the relevant provisions of
GB/T 16623.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|