GB/T 1601-1993 (GB/T 1601-2023 Newer Version) PDF English
Search result: GB/T 1601-1993 (GB/T 1601-2023 Newer Version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 1601-2023 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Determination method of pH value for pesticides
| Valid |
| GB/T 1601-1993 | English | 100 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Determination method of pH value for pesticides
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 1601-2023 Newer version: GB/T 1601-2023
PDF Preview: GB/T 1601-2023
PDF Preview: GB/T 1601-1993
GB/T 1601-1993: PDF in English (GBT 1601-1993) GB/T 1601-1993
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
UDC 632.95.543.257.1
G 23
GB/T 1601-93
Replacing GB 1601-79(83)
Determination method of pH value for pesticides
ISSUED ON: DECEMBER 30, 1993
IMPLEMENTED ON: OCTOBER 01, 1994
Issued by: State Bureau of Technical Supervision
Table of Contents
1 Scope ... 3
2 Definitions ... 3
3 Method summary ... 3
4 Reagents and solutions ... 3
5 Instruments ... 4
6 Measurement steps ... 4
Additional information ... 5
Determination method of pH value for pesticides
1 Scope
This method is suitable for the determination of the pH value of the aqueous dispersion
(or aqueous solution) of pesticide technical materials, powders, wettable powders,
emulsifiable concentrates, etc.
2 Definitions
The pH value of an aqueous solution is defined as the negative logarithm of the
hydrogen ion activity, which is expressed in mol/L.
3 Method summary
Measure the pH value of the aqueous solution, by a pH meter,
4 Reagents and solutions
4.1 Water: Freshly boiled distilled water cooled to room temperature, which has a pH
value of 5.5 ~ 7.0.
4.2 c(C8H5KO4) = 0.05 mol/L Potassium hydrogen phthalate pH standard solution:
Weigh 10.21 g of potassium hydrogen phthalate, which was baked at 105 ~ 110 °C to
constant weight, in a 1000 mL volumetric flask. Use water to dissolve and dilute to the
mark. Shake well. This solution shall be kept for no more than one month.
4.3 c(Na2B4O7) = 0.05 mol/L sodium tetraborate pH standard solution: Weigh 19.07 g
of sodium tetraborate, in a 1000 mL volumetric flask. Use water to dissolve and dilute
to the mark. Shake well. This solution shall be kept for no more than one month.
4.4 Temperature correction of pH value of standard solution:
The pH value of 0.05 mol/L potassium hydrogen phthalate solution is 4.00 (the effect
of temperature on pH value is negligible).
The temperature correction value of 0.05 mol/L sodium tetraborate solution is as
follows:
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|