GB/T 15970.6-2007 PDF in English
GB/T 15970.6-2007 (GB/T15970.6-2007, GBT 15970.6-2007, GBT15970.6-2007)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 15970.6-2007 | English | 180 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Corrosion of metals and alloys -- Stress corrosion testing -- Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
| Valid |
| GB/T 15970.6-1998 | English | RFQ |
ASK
|
4 days
|
Corrosion of metals and alloys--Stress corrosion testing--Part 6: Preparation and use of pre-cracked specimens
| Obsolete |
Standards related to (historical): GB/T 15970.6-2007
PDF Preview
GB/T 15970.6-2007: PDF in English (GBT 15970.6-2007) GB/T 15970.6-2007
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.060
H 25
GB/T 15970.6-2007 / ISO 7539-6.2003
Replacing GB/T 15970.6-1998
Corrosion of metals and alloys - Stress corrosion testing -
Part 6. Preparation and use of pre-cracked specimens for
tests under constant load or constant displacement
(ISO 7539-6.2003, IDT)
ISSUED ON. MAY 14, 2007
IMPLEMENTED ON. DECEMBER 01, 2007
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative reference ... 5
3 Terms and definitions ... 6
4 Principle ... 10
5 Specimens ... 11
6 Initiation and propagation of fatigue cracks ... 31
7 Procedure ... 34
8 Test report ... 44
Annex A (normative) Use of notched specimens for stress corrosion tests ... 46
Annex B (normative) Determination of crack growth velocity ... 50
Foreword
GB/T 15970 consists of the following parts under the general title of “Corrosion
of metals and alloys - Stress corrosion testing”.
Part 1. General guidance on testing procedures (GB/T 15970.1-1995);
Part 2. Preparation and use of bent-beam specimens (GB/T 15970.2-2000);
Part 3. Preparation and use of U-bend specimens (GB/T 15970.3-1995);
Part 4. Preparation and use of uniaxially loaded tension specimens (GB/T
15970.4-2000);
Part 5. Preparation and use of C-ring specimens (GB/T 15970.5-1998);
Part 6. Preparation and use of pre-cracked specimens for tests under constant
load or constant displacement (GB/T 15970.6-2007);
Part 7. Slow strain rate testing (GB/T 15970.7-2017);
Part 8. Preparation and use of specimens to evaluate weldments (GB/T
15970.8-2005);
Part 9. Preparation and use of pre-cracked specimens for tests under rising
load or rising displacement (GB/T 15970.9-2007).
This Part is identical to the International Standard ISO 7539-6.2003 “Corrosion
of metals and alloys - Stress corrosion testing - Part 6. Preparation and use of
pre-cracked specimens for tests under constant load or constant displacement”.
This Part has made the following editorial modification.
- DELETE the foreword of the International Standard;
This Part replaces GB/T 15970.6-1998 “Corrosion of metals and alloys - Stress
corrosion testing - Part 6. Preparation and use of pre-cracked specimens”
Compared with GB/T 15970.6-1998, the main changes are as follows.
- DELETE the content related to incremental load or incremental
displacement;
- ADD the influence of residual stress and electrode potential change on the
test results;
- ADD a description of the possible influence of residual stress during
Corrosion of metals and alloys - Stress corrosion testing -
Part 6. Preparation and use of pre-cracked specimens for
tests under constant load or constant displacement
1 Scope
1.1 This Part of GB/T 15970 covers procedures for designing, preparing and
using pre-cracked specimens for investigating susceptibility to stress corrosion.
It gives recommendations for the design, preparation and use of pre-cracked
specimens for investigating susceptibility to stress corrosion.
Recommendations concerning notched specimens are given in Annex A. The
term “metal” as used in this Part includes alloys.
1.2 Because of the need to confine plasticity at the crack tip, pre-cracked
specimens are not suitable for the evaluation of thin products such as sheet or
wire and are generally used for thicker products including plate bar and forgings.
They can also be used for parts joined by welding.
1.3 Pre-cracked specimens may be loaded with equipment for application of a
constant load or can incorporate a device to produce a constant displacement
at the loading points. Tests conducted under increasing displacement or
increasing load are dealt with in GB/T 15970.9.
1.4 A particular advantage of pre-cracked specimens is that they allow data to
be acquired from which critical defect sizes, above which stress corrosion
cracking may occur, can be estimated for components of known geometry
subjected to known stresses. They also enable rates of stress corrosion crack
propagation to be determined. The latter data may be taken into account when
monitoring parts containing defects during service.
2 Normative reference
The following documents contain the provisions which, through reference in this
Part of GB/T 15970, become the provisions of this Part. For dated references,
their subsequent amendments (excluding corrigendum) or revisions do not
apply to this Part. However, the parties who enter into agreement based on this
Part are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Part.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|