Powered by Google www.ChineseStandard.net Database: 189760 (15 Jun 2024)

GB/T 15856.1-2002 PDF in English


GB/T 15856.1-2002 (GB/T15856.1-2002, GBT 15856.1-2002, GBT15856.1-2002)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 15856.1-2002English85 Add to Cart 0-9 seconds. Auto-delivery. Cross recessed pan head drilling screws with tapping screw thread Valid


Preview PDF (Powered by Google. Reload if blank, scroll for next page)

Standards related to: GB/T 15856.1-2002

GB/T 15856.1-2002: PDF in English (GBT 15856.1-2002)

GB/T 15856.1-2002
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.060.10
J 13
eqv ISO 15481.1999
Cross recessed pan head drilling screws with
tapping screw thread
十字槽盘头自钻自攻螺钉
ISSUED ON. DECEMBER 5, 2002
IMPLEMENTED ON. JUNE 1, 2003
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Dimensions... 5
4 Specifications and reference standards ... 6
5 Designation ... 7
Foreword
This Standard is equivalent to the International Standard ISO 15481.1999 “Cross
recessed pan head drilling screws with tapping screw thread”.
This Standard is one of the national standard “self-drilling self-screw” series of product
standards. The series includes.
a) GB/T 15856.1-2002 Cross recessed pan head drilling screws with tapping screw
thread
b) GB/T 15856.2-2002 Cross recessed countersunk head drilling screws
c) GB/T 15856.3-2002 Cross recessed raised countersunk head drilling screws with
tapping screw thread
d) GB/T 15856.4-2002 Hexagon flange head drilling screws with tapping screw
thread
e) GB/T 15856.5-2002 Hexagon washer head drilling screws with tapping screw
thread
ISO 15481 does not specify the packaging technical requirements; this Standard has
given relevant specifications (Table 2).
ISO 15481 does not provide simplified designations; this Standard has given a
simplified designation example according to the simplification principle of GB/T1237.
Compared with GB/T 15856.1-1995, the main technical contents of this Standard are
not modified.
This Standard has replaced by GB/T 15856.1-1995 since the date of implementation.
This Standard is proposed by the China Machinery Industry Federation.
This Standard shall be under the jurisdiction of the National Technical Committee on
Fastener of Standardization Administration of China.
Responsible drafting organization of this Standard. Mechanical Science Research
Institute.
Participated drafting organization of this Standard. Ningbo Zhongjing Special Fastener
Co., Ltd.
The previous version of the standard replaced by this Standard is as follow.
- GB/T 15856. 1-1995.
Cross recessed pan head drilling screws with
tapping screw thread
十字槽盘头自钻自攻螺钉
eqv ISO 15481.1999
Replacing GB/T 15846.1-1995
1 Scope
This Standard specifies the characteristics of cross recessed pan head drilling screws
with tapping screw threads from ST2.9 up to and including ST6.3.
2 Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this Standard. At the time of publication of this standard,
the versions shown are valid. All standards will be revised, parties to agreements
based on this Standard are encouraged to investigate the possibility of applying the
most recent editions of the normative documents indicated below.
GB/T 90.1-2002 Fasteners - Acceptance inspection (idt ISO 3269.2000)
GB/T 90.2-2002 Fasteners - Marking and packaging
GB/T 944.1-1985 Cross recesses for screws (eqv ISO 4757.1983)
GB/T 1237-2000 Designation system for fasteners (eqv ISO 8991.1986)
GB/T 3098.11-2002 Drilling screws with tapping screw thread - Mechanical and
functional properties (idt ISO 10666.1999)
GB/T 3103.1-2002 Tolerances for fasteners - Part 1. Bolts, screws, studs and nuts
- Product grades A, B and C (idt ISO 4759-1.2000)
GB/T 5267.1-2002 Fasteners - Electroplated coatings (ISO 4042.1999, IDT)
GB/T 5280-2002 Tapping screw thread (idt ISO 1478.1999)
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.