Powered by Google www.ChineseStandard.net Database: 189759 (9 Jun 2024)

GB/T 15224.1-2018 PDF in English

GB/T 15224.1-2018 (GB/T15224.1-2018, GBT 15224.1-2018, GBT15224.1-2018)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 15224.1-2018English90 Add to Cart 0-9 seconds. Auto-delivery. Classification for quality of coal -- Part 1: Ash Valid

Standards related to: GB/T 15224.1-2018

GB/T 15224.1-2018: PDF in English (GBT 15224.1-2018)

GB/T 15224.1-2018
ICS 73.040
D 20
Replacing GB/T 15224.1-2010
Classification for quality of coal - Part 1. Ash
ISSUED ON. MAY 14, 2018
Issued by. State Administration for Market Regulation;
Standardization Administration of China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Classification of coal seam ash ... 5 
4 Inspection of ash ... 6 
GB/T 15224 “Classification for quality of coal” consists of three parts.
- Part 1. Ash;
- Part 2. Sulfur content;
- Part 3. Calorific value.
This Part is Part 1 of GB/T 15224.
This Part replaces GB/T 15224.1-2010 “Classification for quality of coal - Part
1. Ash”.
Compared with GB/T 15224.1-2010, in addition to editorial modifications, the
main technical deviations in this Part are as follows.
- added “GB/T 482” “GB/T 30732” “MT/T 1090” as references in normative
references (see Clause 2 of this Edition);
- deleted “GB/T 475” “GB/T 19494.1” “Procedures for coal sampling of coal
resource exploration (formerly issued by the Ministry of Coal in 1979)” from
normative references (see Clause 2 of this Edition);
- modified “medium ash” as “high ash”, “high ash” as “ultra-high ash” (see
Table 1 of this Edition);
- added the note to the table that “if the ash is greater than 40%, the coal
resource reserves shall not be calculated” (see Table 1 of this Edition);
- deleted the classification of commercial ash (see Clause 4 of Edition 2010).
This Part was proposed by China Coal Industry Association.
This Part shall be under the jurisdiction of National Technical Committee on
Coal of Standardization Administration of China (SAC/TC 42).
The drafting organizations of this Part. Coal Science and Technology Research
Institute Co., Ltd., Shaanxi Coalfield Geology Testing and Testing Co., Ltd.,
Datong Coal Mine Group Co., Ltd., Hebei Institute of Coal Geology, Land and
Resources Physical Geological Data Center.
Main drafters of this Part. Tu Hua, Chen Xinjuan, Tong Xiao, Zhang Yuhong, Gu
Qiuxiang, Jia Huaijun, Ma Dong, Zou Fang, Gao Yan, Zhang Jing, Song
Shuanchen, Wang Yanyun, Li Jun.
Versions of standard substituted by this Standard are.
Classification for quality of coal - Part 1. Ash
1 Scope
This Part of GB/T 15224 specifies the classification of coal based on dry basis
ash (Ad) range, naming and inspection of ash.
This Part is applicable to coal resource exploration and evaluation, as well as
guidance on coal production and processing.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 212, Proximate analysis of coal
GB/T 474, Preparation of coal sample
GB/T 482, Sampling of coal in seams
GB/T 19494.2, Mechanical sampling of coal Part 2. Method for sample
GB/T 30732, Proximate analysis of coal - Instrumental method
MT/T 1090, Coal resource exploration and evaluation standard of medium
3 Classification of coal seam ash
The coal seam ash is classified according to Table 1.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.