GB/T 15115-2009 (GB/T 15115-2024 Newer Version) PDF English
Search result: GB/T 15115-2009 (GB/T 15115-2024 Newer Version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 15115-2024 | English | 325 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Die casting aluminum alloys
| Valid |
| GB/T 15115-2009 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Die casting aluminum alloys
| Obsolete |
| GB/T 15115-1994 | English | 199 |
Add to Cart
|
2 days
|
Die casting aluminium alloys
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 15115-2024 Newer version: GB/T 15115-2024
PDF Preview: GB/T 15115-2024
PDF Preview: GB/T 15115-2009
GB/T 15115-2009: PDF in English (GBT 15115-2009) GB/T 15115-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.10
J 31
Replacing GB/T 15115-1994
Die casting aluminum alloys
ISSUED ON. APRIL 1, 2009
IMPLEMENTED ON. DECEMBER 1, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Designations and codes of alloys ... 6
4 Technical requirements ... 6
5 Inspection methods and rules ... 7
6 Packaging, transportation and storage ... 7
Annex A (Informative) Cross references of domestic and foreign die casting
aluminum alloy codes ... 8
Foreword
This Standard modifies and adopts ASTM B 179-06, Standard specification for
aluminum alloys in ingot and molten forms for castings from all casting processes.
Compared with ASTM B 179-06, the differences of this Standard with respect to main
technical contents are as follows.
-- significant editorial modifications are made in structure;
-- the normative references in Clause 2 of ASTM B 179-06 are not used;
-- the ordering information of and electrical conductivity requirements for die casting
aluminum alloys in Clauses 3 and 9 of ASTM B 179-06 are not used;
-- Annex A to ASTM B 179-06 are not used;
-- new Annexes A, B and C are added.
This Standard replaces GB/T 15115-1994, Die casting aluminum alloys.
Compared with GB/T 15115-1994, the main technical content changes of this Standard
are as follows.
-- in chemical composition, it modifies the contents of Fe and Mg and the content
of Zn in YLAlSi9Cu4;
-- it adds the material designation YZAlSi10Mg (YL101) and deletes the material
designation YZAlSi12Cu2 (YL108);
-- it cancels the mechanical property values in technical requirements, which are
not deemed as the criteria for acceptance of die casting aluminum alloys;
-- Annexes A, B and C are added.
Annexes A, B and C are informative.
This Standard was proposed by the China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee 54 on
Foundry of Standardization Administration of China (SAC/TC 54).
The drafting organizations of this Standard. Shenyang Research Institute of Foundry
Co., Ltd., Guangdong Hongtu Technology (Holdings) Co., Ltd., Dongguan Shijie
Huafeng Hardware Factory, FU Casting Co., Ltd., Ningbo Wanan Co., Ltd.
The main drafters of this Standard. Chang Yiqian, Qu Xueliang, Liang Huancao, Dong
Xianming, He Jingyuan.
Die casting aluminum alloys
1 Scope
This Standard specifies the designations and codes, technical requirements,
inspection methods and inspection rules, packaging, transportation and storage, etc.
for die casting aluminum alloys.
This Standard applies to die casting aluminum alloys.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 20975.3, Methods for chemical analysis of aluminium and aluminium alloys
– Part 3. Determination of copper content
GB/T 20975.4, Methods for chemical analysis of aluminium and aluminium
alloys – Part 4. Determination of iron content – Orthopenanthroline photometric
method
GB/T 20975.5, Methods for chemical analysis of aluminium and aluminium alloys
– Part 5. Determination of silicon content
GB/T 20975.7, Methods for chemical analysis of aluminium and aluminium alloys
– Part 7. Determination of manganese content – Potassium periodate
spectrophotometric method
GB/T 20975.8, Methods for chemical analysis of aluminium and aluminium alloys
– Part 8. Determination of zinc content
GB/T 20975.10, Methods for chemical analysis of aluminium and aluminium alloys
– Part 10. Determination of tin content
GB/T 20975.11, Methods for chemical analysis of aluminium and aluminium alloys
– Part 11. Determination of lead content – Flame atomic absorption spectrometric
method
GB/T 20975.12, Methods for chemical analysis of aluminium and aluminium alloys
– Part 12. Determination of titanium content
GB/T 20975.13, Methods for chemical analysis of aluminium and aluminium alloys
– Part 13. Determination of vanadium content – N-benzoyl-Nphenylhydroxylamine
spectrophotometric method
GB/T 20975.14, Methods for chemical analysis of aluminium and aluminium alloys
– Part 14. Determination of nickel content
GB/T 20975.16, Methods for chemical analysis of aluminium and aluminium
alloys – Part 16. Determination of magnesium
3 Designations and codes of alloys
3.1 Representation of alloy designations
Designation of die casting aluminum alloys consists of chemical symbols of aluminum
and major alloy elements. Major alloy elements are followed by digits showing their
nominal mass fraction (nominal mass fraction is the rounded off integer values of the
mean mass fraction of the elements).
“YZ” (“Y” and “Z” are the first letters of two Chinese characters’ pinyin “Ya” and “Zhu”)
aluminum designations represent a die casting alloy.
3.2 Representation of alloy codes
In alloy codes, “YL” (“Y” and “L” are the first letters of two Chinese characters’ pinyin
“Ya” and “Lv”) represent a die casting aluminum alloy. The first digit behind YL, i.e. 1,
2, 3 and 4, represents respectively Al-Si, Al-Cu, Al-Mg and Al-Sn serial alloys, which is
the code of the alloys. The second and third digits after YL are sequence numbers.
4 Technical requirements
Chemical compositions of die casting aluminum alloys shall be as specified in Table 1.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|