HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 14986.4-2018 PDF English


Search result: GB/T 14986.4-2018 English: PDF (GB/T14986.4-2018)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 14986.4-2018English145 Add to Cart 0-9 seconds. Auto-delivery. Soft magnetic alloys -- Part 4: Iron-chromium alloys Valid
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 14986.4-2018     Related standards: GB/T 14986.4-2018

PDF Preview: GB/T 14986.4-2018


GB/T 14986.4-2018: PDF in English (GBT 14986.4-2018)

GB/T 14986.4-2018 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.140.40 H 58 Partially replacing GB/T 14986-2008 Soft Magnetic Alloys - Part 4. Iron-chromium Alloys ISSUED ON. JUNE 7, 2018 IMPLEMENTED ON. MARCH 1, 2019 Issued by. State Administration for Market Regulation of the People’s Republic of China; Standardization Administration Committee of the People’s Republic of China. Table of Contents Foreword ... 3  1 Scope ... 5  2 Normative References ... 5  3 Terms and Definitions ... 6  4 Content of Order ... 6  5 Dimension and Appearance ... 7  6 Technical Requirements ... 7  7 Test Methods ... 9  8 Inspection Rules ... 9  9 Packaging, Mark and Quality Certificate ... 10  Appendix A (informative appendix)... 11  Appendix B (informative appendix) ... 12  Foreword GB/T 14986 Soft Magnetic Alloys is divided into five parts as follows. -- Part 1. general requirements; -- Part 2. iron-nickel alloys; -- Part 3. iron-cobalt alloys; -- Part 4. iron-chromium alloys; -- Part 5. iron-aluminum alloy. This is the fourth part of GB/T 14986. This Part is drafted in accordance with stipulations in GB/T 1.1-2009. This Part is drafted as a replacement of iron-chromium alloys part in GB/T 14986-2008 High Saturation Magnetic Induction Magnetic Compensate Alloys Depending on Temperature Variation Corrosion-resisting Iron-aluminum Permanent Permeability Soft Magnetic Alloys. In comparison with GB/T 14986-2008, there are several main technical changes as follows. -- 1J111 alloy and relevant technical requirements are added (refer to Chapter 5 and 6.4); -- The limitation of S element content in 1J116 and 1J117 becomes more rigorous; the upper limit changes from 0.020% to 0.015% (refer to Table 1; Table 10 in Version 2008); -- 1J117 cold-rolled strip and relevant technical requirements are added (refer to Chapter 1 and Table 2; Chapter 1 in Version 2008); -- 1J116 and 1J117 cold-drawn wire and relevant technical requirements are added (refer to Chapter 1 and Table 2; Chapter 1 in Version 2008); -- Smelting methods are modified (refer to 6.2; 6.2 in Version 2008); -- The magnetic performance of 1J116 is enhanced; coercivity decreases from 80 A/m to 70 A/m (refer to Table 3; Table 13 in Version 2008); -- The re-inspection and determination rules of alloy bar low-magnification and tower-shaped texture are added as a supplement (refer to 8.4.2, 8.4.3; Chapter 9 in Version 2008); Soft Magnetic Alloys - Part 4. Iron-chromium Alloys 1 Scope This Part in GB/T 14986 specifies the terms, definitions, content of order, dimension, appearance, technical requirements, test methods, inspection rules, packaging, mark and quality certificate of iron-chromium soft magnetic alloys with relatively high saturation, magnetic induction strength, and relatively low coercivity. This Part is applicable to cold-rolled strip, cold-rolled sheet, cold-drawn wire, hot-rolled strip, hot-rolled wire rod and hot-rolled (wrought) bar (hereinafter referred to as alloys) that apply 1J111, 1J116 and 1J117 iron-chromium soft magnetic alloys to certain corrosive medium. 2 Normative References The following documents are indispensable to the application of this Standard. In terms of references with a specified date, only versions with a specified date are applicable to this Standard. The latest version (including all the modifications) of references without a specified date is also applicable to this Standard. GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method GB/T 223.11 Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method GB/T 223.13 Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content GB/T 223.20 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potentiometric Titration Method for the Determination of Cobalt Content GB/T 223.23 Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method GB/T 223.59 Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method GB/T 223.64 Iron, Steel and Alloy - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method GB/T 223.79 Iron and Steel - Determination of Multi-element Contents - X-ray Fluorescence Spectrometry (Routine Method) GB/T 223.85 Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace GB/T 223.86 Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method after Combustion in an Induction Furnace GB/T 4162 Forged and Rolled Steel Bars - Method for Ultrasonic Testing GB/T 14986.1-2018 Soft Magnetic Alloys - Part 1. General Requirements GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method) GB/T 20125 Low-alloy Steel - Determination of Multi-element Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method 3 Terms and Definitions Terms and definitions provided in GB/T 14986.1-2018 are applicable to this Standard. 4 Content of Order Order-placing contract shall include the following content. a) Number of this part; b) Alloy trademark; c) Dimension and precision division (refer to Chapter 5); d) Weight (or quantity); e) State of delivery (refer to Table 2); f) Special requirements (if necessary, refer to 6.7). ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.