GB/T 13932-2016 PDF in English
GB/T 13932-2016 (GB/T13932-2016, GBT 13932-2016, GBT13932-2016)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 13932-2016 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Cast iron swing check valves
| Valid |
| GB/T 13932-1992 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
General purpose industrial valves - Cast iron swing check valves
| Obsolete |
Standards related to (historical): GB/T 13932-2016
PDF Preview
GB/T 13932-2016: PDF in English (GBT 13932-2016) GB/T 13932-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.060.50
J 16
Replacing GB/T 13932-1992
Cast Iron Swing Check Valves
ISSUED ON. AUGUST 29, 2016
IMPLEMENTED ON. MARCH 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Application Scope ... 5
2 Normative References ... 5
3 Structures and Basic Parameters ... 6
4 Technical Requirements ... 9
5 Test Methods ... 13
6 Inspection Rules ... 14
7 Requirements for Marking and Delivery ... 15
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 13932-1992, General Purpose Industrial Valves – Cast
Iron Swing Check Valves. Compared with GB/T 13932-1992, the major technical
differences of this Standard are as follows, in addition to editorial modifications.
-- it cancels the words “General Purpose Industrial Valves” in the standard name
(see cover and page 1);
-- it modifies the application scope (see Article 1; Article 1 of edition 1992);
-- it deletes Figure 4 (3.2 of edition 1992);
-- it modifies the basic parameters (see 3.2; 3.2 of edition 1992);
-- it modifies the pressure-temperature ratings (see 4.1; 4.1 of edition 1992);
-- it modifies the inner diameters of valve seat and the drift diameters of valve body
(see 4.3.7; 4.3.8 of edition 1992);
-- it adds the requirements for bypass devices (see 4.9);
-- it adds mechanical property test (see 5.1);
-- it adds shell wall thickness measurement (see 5.3);
-- it adds inspection rules (see Article 6);
-- it modifies the content of marking, the requirements for delivery and so on (see
Article 7; Article 6 of edition 1992).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Valves (SAC/TC 188).
The main drafting organizations of this Standard. Hefei General Machinery Research
Institute, Anhui Fangxing Industrial (Group) Co., Ltd., Ningbo Amico Copper Valves
Manufacturing Inc., Jiangsu Zhuze Valve Co., Ltd., Anhui Baihu Valve Factory Co., Ltd.,
Nengfa Weiye Tieling Valve Joint-stock Co., Ltd., Anhui Tongdu Flow Technolgy Co.,
Ltd.
The main drafters of this Standard. Huang Yaming, Peng Lin, Jiang Jiaqian, Zheng
Xuezhen, Xiao Peng, Cheng Jiangshan, Li Yanhui, Zhang Wenbing.
The edition of the standard replaced by this Standard is as follows.
Cast Iron Swing Check Valves
1 Application Scope
This Standard specifies the structures, technical requirements, test methods,
inspection rules, and requirements for marking and delivery of cast iron swing check
valves.
This Standard applies to grey cast iron and spheroidal graphite cast iron swing check
valves connected with flanges, whose nominal pressure is PN 2.5 ~ PN 25, nominal
dimension DN 50 ~ DN 1800 and medium water (hereinafter referred to as “check
valves”).
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 152.1, Fasteners – Clearance Holes for Rivets
GB/T 152.2, Fasteners – Countersinks for Countersunk Head Screws
GB/T 152.4, Fasteners - Counterbores for Hexagon Bolts and Nuts
GB/T 228.1, Metallic Materials – Tensile Testing – Part 1. Method for Test at Room
Temperature
GB/T 229, Metallic Materials – Charpy Pendulum Impact Test Method
GB/T 1184-1996, Geometrical Tolerancing – Geometrical Tolerance for Features
without Individual Tolerance Indications
GB/T 1348, Spheroidal Graphite Iron Castings
GB/T 9439, Grey Iron Castings
GB/T 12220, Industrial Valves – Marking
GB/T 12221, Metal Valves – Face to Face, End to End, Center to Face and Center
to End Dimensions
GB/T 12226, General Purpose Industrial Valve – Specification of Flake Graphite
Iron Castings
4.5.2 The sealing surface between valve body and valve disc can be processed
directly on valve body and valve disc or inserted with sealing ring or overlaid with other
metals. If the sealing surface is overlaid, the thickness of overlaying after processing
shall not be smaller than 2 mm.
4.6 Rocker
The connection between rocker and valve disc and valve body shall rotate flexibly; it
shall be ensured that the connecting place between rocker and valve body is secure
and will not loosen during use.
4.7 Filtering screen
For check valves equipped with filtering screen, the total area of filtering holes in
filtering screen shall be greater than 1.5 times of the sectional area of nominal
dimensions.
4.8 Buffer device
All types of buffer devices can be provided for check valves as required by the user;
consideration shall be given to that butterfly and valve stem shall have sufficient safety
coefficient after buffer devices are provided.
4.9 Bypass
Swing multiple-disc horizontal check valves of nominal dimensions not smaller than
DN800 whose nominal pressure is not smaller than PN6 and nominal dimensions not
smaller than DN1200, nominal pressure not smaller than PN10 and nominal
dimensions not smaller than DN800 shall be provided with bypass pipelines.
4.10 Materials
The materials of the major parts of check valves shall be selected in accordance with
JB/T 5300. Grey cast iron shall be as specified in GB/T 12226; spheroidal graphite cast
iron shall be as specified in GB/T 12227. Other materials shall meet the requirements
of relevant materials standards.
4.11 Shell strength and sealing property
Shell strength and sealing property of check valves shall be as specified in GB/T 13927.
5 Test Methods
5.1 Mechanical property test
5.1.1 The preparation of grey cast iron test specimens shall be as specified in GB/T
9439; the preparation of spheroidal graphite cast iron test specimens shall be as
specified in GB/T 1348.
6.3.1 Under any of the following circumstances, type inspection shall be carried out
and they can be mass produced only after they pass type inspection.
a) during the trial production and approval of a new product;
b) when there is any significant change in structure, material, process after mass
production, which may influence the product properties;
c) when production is resumed after a long term of production halt.
6.3.2 Specimens shall be taken for type test periodically or when a certain output is
reached during normal production.
6.3.3 The sampling for type inspection shall be carried out as follows.
a) test specimens shall be taken randomly from the inventory which has passed the
inspection of the quality inspection department of the manufacturer. The
minimum number for sampling of each specification and the number of
specimens shall be as specified in Table 6.
b) test specimens can also be taken from the user. They are taken randomly from
the products which have been supplied to but not used by the user and remain
in the as-delivered state. The minimum number is not limited by the specification
of Table 6, but the test specimen number is still subjected to the specification of
Table 7.
c) when assessment is done for the quality of the whole series of products, 2 ~ 3
typical specifications shall be sampled in accordance with the size of the series
scope to carry out inspection. The minimum number for sampling of each
specification and the specimen number shall be as specified in Table 6.
Table 6 – Test Specimen Number
Nominal dimension DN Min number for sampling/pc Specimen number/pc
≤ 200 10 1
250 ~ 600 6 1
≥ 700 4 1
6.3.4 All items of type inspection shall be as specified in Table 5.
7 Requirements for Marking and Delivery
7.1 Marking content
The marking of check valves shall be as specified in GB/T 12220 and shall be as
specified in 7.2 and 7.3 as well.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|