GB/T 13452.2-2008 PDF English
Search result: GB/T 13452.2-2008_English: PDF (GB/T13452.2-2008)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 13452.2-2008 | English | 375 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Paints and varnishes -- Determination of film thickness
| Valid |
| GB/T 13452.2-1992 | English | 399 |
Add to Cart
|
3 days
|
Paints and varnishes--Determination of film thickness
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 13452.2-2008 Related standards: GB/T 13452.2-2008
PDF Preview: GB/T 13452.2-2008
GB/T 13452.2-2008: PDF in English (GBT 13452.2-2008) GB/T 13452.2-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 87.040
G 50
GB/T 13452.2-2008 / ISO 2808:2007
Replacing GB/T 13452.2-1992
Paints and Varnishes – Determination of Film Thickness
(ISO 2808:2007, IDT)
ISSUED ON: MAY 14, 2008
IMPLEMENTED ON: OCTOBER 01, 2008
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Determination of Wet-Film Thickness ... 8
5 Determination of Dry-Film Thickness ... 16
6 Determination of Thickness of Uncured Powder Layers ... 37
7 Measurement of Film Thickness on Rough Surfaces ... 42
8 Test Report ... 43
Annex A (Informative) Overview of Methods ... 45
Bibliography ... 48
Foreword
GB/T 13452 Paints and Varnishes can be divided into the following parts:
--- Part 1 is GB/T 13452.1-1992 Paints and Varnishes - Determination of Total Lead - Flame
Atomic Absorption Spectrometric Method;
--- Part 2 is GB/T 13452.2-2008 Paints and Varnishes - Determination of Film Thickness;
--- Part 3 is GB/T 13452.3-1992 Paints and Varnishes - Determination of Hiding Power -
Part 1: Kubelka-Munk Method for White and Light-Colored Paints;
--- Part 4 is GB/T 13452.4-2008 Paints and Varnishes - Determination of Resistance to
Filiform Corrosion on Steel.
This Part is Part 2 of GB/T 13452.
This Part equivalently adopts the international standard ISO 2808-2007 Paints and Varnishes –
Determination of Film Thickness (English Version).
For the benefit of use, this Standard made the following editorial modifications against ISO
2808:2007:
a) Delete the Foreword and Introduction of the internal standard;
b) Change ISO 2811-1 in the Bibliography of this Part into the national standard GB/T 6750
that equivalently adopts this international standard; and Change ISO 3233 into national
standard GB/T 9272 that modifies and adopts this international standard.
This Part replaced GB/T 13452.2-1992 Paints and Varnishes - Determination of Film Thickness.
Compared with the previous edition GB/T 13452.2-1992, the major technical differences with
this Part are as follows:
--- Add Clause 3 Terms and Definitions in this Part;
--- The test of this Part is divided into four clauses based on wet-film thickness, dry-film
thickness, thickness of uncured powder layer and paint film thickness on rough surface;
while each clause is further divided into the relevant test methods. However, the previous
edition only arranges on a clue of single test method;
--- Add the test methods and categories of the wet-film thickness and dry-film thickness in
Clauses 4 and 5 of this Part;
--- Add the thickness of uncured powder layer and paint film thickness on rough surface in
Clauses 6 and 7 of this Part;
Paints and Varnishes – Determination of Film Thickness
1 Scope
This Standard describes a number of methods that are applicable to the measurement of the
thickness of coatings applied to a substrate. Methods for determining wet-film thickness, dry-
film thickness and the film thickness of uncured powder layers are described. Reference is made
to individual standards where these exist. Otherwise, the method is described in detail.
An overview on the methods is given in Annex A, in which the field of application, existing
standards and the precision are specified for the individual methods.
This Standard also defines terms concerning the determination of film thickness.
2 Normative References
The provisions in following documents become the provisions of this Part through reference in
this Part of GB/T 13452. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Standard, however, parties who reach an
agreement based on this Standard are encouraged to study if the latest versions of these
documents are applicable. For undated references, the latest edition of the referenced document
applies.
ISO 463 Geometrical Product Specifications (GPS) – Dimensional Measuring Equipment
– Design and Metrological Characteristics of Mechanical Dial Gauges
ISO 3611 Micrometer Callipers for External Measurement
ISO 4618:2006 Paints and Varnishes – Terms and Definitions
ISO 8503-1 Preparation of Steel Substrates before Application of Paints and Related
Products – Surface Roughness Characteristics of Blast-Cleaned Steel Substrates – Part 1:
Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of
Abrasive Blast-Cleaned Surface
3 Terms and Definitions
For the purposes of this Document, the terms and definitions given in ISO 4618:2006 and the
following apply.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|