GB/T 11918.1-2014 PDF in English
GB/T 11918.1-2014 (GB/T11918.1-2014, GBT 11918.1-2014, GBT11918.1-2014)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 11918.1-2014 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements
| Valid |
| GB/T 11918-2001 | English | RFQ |
ASK
|
7 days
|
Industrial plugs and sockets and couplers -- Part 1: General requirements
| Obsolete |
| GB/T 11918-1989 | English | RFQ |
ASK
|
9 days
|
Plugs, socket-outlets and couplers for industrial purpose--General requirement
| Obsolete |
Standards related to (historical): GB/T 11918.1-2014
PDF Preview
GB/T 11918.1-2014: PDF in English (GBT 11918.1-2014) GB/T 11918.1-2014
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.120.30
K 30
Replacing GB/T 11918-2001
Plugs, socket-outlets and couples for industrial
purposes - Part 1. General requirements
(IEC 60309-1.2012, MOD)
ISSUED ON. JUNE 24, 2014
IMPLEMENTED ON. JANUARY 22, 2015
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 4
1 Scope ... 10
2 Normative references ... 10
3 Terms and definitions ... 12
4 General ... 17
5 Standard ratings ... 18
6 Classification ... 19
7 Marking ... 20
8 Dimensions ... 24
9 Protection against electric shock ... 25
10 Provision for earthing ... 26
11 Terminals and terminations ... 27
12 Interlocks ... 41
13 Resistance to ageing of rubber and thermoplastic material ... 42
14 General construction ... 42
15 Construction of socket-outlets ... 43
16 Construction of plugs and connectors ... 45
17 Construction of appliance inlets ... 46
18 Degrees of protection ... 47
19 Insulation resistance and dielectric strength ... 49
20 Breaking capacity ... 50
21 Normal operation ... 52
22 Temperature rise ... 54
23 Flexible cables and their connection ... 56
24 Mechanical strength ... 60
25 Screws, current-carrying parts and connections ... 64
26 Creepage distances, clearances and distances through sealing
compound ... 67
27 Resistance to heat, to fire and to tracking ... 69
28 Corrosion and resistance to rusting ... 70
29 Conditional short-circuit current withstand test ... 71
30 Electromagnetic compatibility ... 73
Annex A (Normative) Guidance and description of test apparatus ... 88
Annex B (Informative) List of the clause numbers that require re-testing
... 95
Bibliography ... 96
Foreword
GB/T 11918 Plugs, socket-outlets and couplers for industrial purposes is planed to be
divided into 4 parts.
— Part 1. General requirements;
— Part 2. Dimensional compatibility and interchangeability requirements for pin and
contact - tube accessories;
— Part 3. (name to be determined);
— Part 4. Switched socket-outlets and connectors with or without interlock.
This Part is Part 1 of GB/T 11918.
This Part is drafted in accordance with the rules specified in GB/T 1.1-2009.
This Part replaces GB/T 11918-2001 Plugs, socket-outlets and couplers for industrial
purposes - Part 1. General requirements.
Compared with GB/T 11918-2001, this Part has the following main changes.
-- In chapter 1, rated operating voltage is changed from 690V to 1000V, and rated
current is changed from 250A to 800A;
-- In chapter 1, it clarifies that these accessories are intended to be installed and used
by trained or skilled persons;
-- In chapter 1, applicable scope for electrical device accessories with screw-less
terminal or insulation piercing terminals is supplemented;
-- In chapter 3, sub-clause 3.18.7 definition of screw-less terminal and sub-clause
3.18.8 definition of Insulation piercing terminals are added;
-- Definition of integral switching device is amended according to definition of
sub-clause 3.103.3 specified in GB/T 11918.4-2014;
-- The minimum degree of protection is clarified as IP23; requirements for combination
of plug, socket-outlet, appliance inlet socket-outlet and connectors are also
specified;
-- Sub-clause 4.2.1 specifies relevant provisions for parts or components;
-- A provision requires that test in sub-clause 11.1.4 shall be carried out on a new group
of additional samples is added in sub-clause 4.2.4;
-- In sub-clause 5.1, 750V and 1000V are added as rated voltage;
-- In sub-clause 5.2, preferred rated current 315 A, 400 A, 630 A, 800 A are added for
series I; preferred rated current 300 A, 350 A, 500 A, 600 A are added for series II
while notes are also added;
-- In table 1, text "series I is recommended in China" is added;
-- Sub-clause 6.1.2 is changed to classification on the basis of protection degrees
according to GB 4208;
-- In chapter 6, sub-clause 6.1.6, 6.1.7, 6.1.8 are added;
-- In sub-clause 7.1, indication requirements for code of this Part is added; it also
stipulates that the code of this Part can be indicated on products or package unit;
-- Sub-clause 7.6 specifies the composition of recommended petrol;
-- Table 2 of sub-clause 7.7 specifies the colour of enclosure corresponding to 500 V~1
000 V rated operating voltage;
-- -In chapter 7, sub-clause 7.8, 7.9, 7.10 are added;
-- In sub-clause 8.1, note " GB/T 11918.2 provides some standard sheets" is added;
-- In sub-clause 8.2, connection conditions of single-phase or three-phases plugs
inserting into socket-outlet with three-phases + neutral line are added;
-- In table 3, sizes of connectable conductor which are used when rate current are 315
A, 400 A, 630 A, 800 A are added;
-- Chapter 11 is re-complied; requirements as well as tests concerning screw-type
terminal, screwless terminal and insulation piercing terminal (IPT) are added;
-- In chapter 12, it clarifies that interlock shall be inspected according to GB/T 11918.4;
-- Sub-clause 15.8 is changed to requirements of socket-outlet with rated operating
voltage above 50V a.c or 120 d.c.;
-- Sub-clause 16.9 is changed to requirements of plug and connector with rated
operating voltage above 50V a.c or 120 d.c;
-- Sub-clause 17.3 is changed to requirements of appliance inlet socket-outlet with
rated operating voltage above 50V a.c or 120 d.c.
-- -In sub-clause 18.2, requirements of accessories with 3 or 4 as the first characteristic
number and protection degree less than IPX4 are added;
-- Contents of sub-clause 18.3 and sub-clause 18.4 are removed;
-- 3 notes concerning electric strength test are added in sub-clause 19.3;
-- In table 12, cable models are adjusted according to IEC 60245-4.2011;
-- In chapter 20, metal support for device accessories connection with rated voltage of
380 V~415 V is removed;
-- In table 9, breaking capacity corresponding to 315 A, 400 A, 630 A, 800 A is added;
-- In chapter 21, wipe-clean maintenance operation requirement after every 500
strokes is added; provision that bolt and plug bush of device accessories shall have
no position correction, lubricating or other adjustments is also stipulated;
-- In table 10, normal operation cycles corresponding to 315 A, 400 A, 630 A, 800 A are
added;
-- In table 11, test current of temperature rise test and conductor cross section area
corresponding to 315 A, 400 A, 630 A, 800 A are added;
-- In chapter 22, duration of temperature rise test when rated current is over 250A is
added;
-- In table 12, nominal cross section area corresponding to 315 A, 400 A, 630 A, 800 A
are added;
-- in table 13, approximate value of cable outer diameter corresponding to 315 A, 400 A,
630 A, 800 A are added;
-- In table 14, tension and torque bore by cable corresponding to 315 A, 400 A, 630 A,
800 A are added;
-- In table 15, impact energy corresponding to 315 A, 400 A, 630 A, 800 A are added;
-- In table 16, column of "above 30A" is removed;
-- In table 19, creepage distance, electrical clearance and distance through sealant for
" 500V to 600V" and "690V to 100V" are added;
-- Sub-clause 27.3 cites GB/T 5169.21 directly and simplifies the relevant description;
-- Sub-clause 27.5 cites GB/T 4207 directly and simplifies the relevant description;
-- Gauges for testing insertability of round unprepared conductors having the maximum
specified cr...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|