HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 10322.5-2024 PDF English


Search result: GB/T 10322.5-2024 English: PDF (GB/T10322.5-2024)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 10322.5-2024English440 Add to Cart 0-9 seconds. Auto-delivery. Iron ores - Determination of the moisture content of a lot Valid
GB/T 10322.5-2016English130 Add to Cart 0-9 seconds. Auto-delivery. Iron ores -- Determination of the moisture content of a lot Obsolete
GB/T 10322.5-2000English70 Add to Cart 0-9 seconds. Auto-delivery. Iron ores - Determination of moisture content of a consignment Obsolete
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 10322.5-2024     Related standards: GB/T 10322.5-2024

PDF Preview: GB/T 10322.5-2024


PDF Preview: GB/T 10322.5-2016


PDF Preview: GB/T 10322.5-2000


GB/T 10322.5-2024: PDF in English (GBT 10322.5-2024)

GB/T 10322.5-2024 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 73.060.10 CCS D 31 GB/T 10322.5-2024 / ISO 3087:2020 Replacing GB/T 10322.5-2016 Iron ores - Determination of the moisture content of a lot (ISO 3087:2020, IDT) ISSUED ON: MAY 28, 2024 IMPLEMENTED ON: DECEMBER 01, 2024 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3 Introduction ... 5 1 Scope ... 6 2 Normative references ... 6 3 Terms and definitions ... 6 4 Principle ... 7 5 Apparatus ... 7 6 Sample preparation ... 7 7 Test procedure ... 8 8 Verification ... 10 9 Calculations and expression of results ... 10 10 Test report ... 14 Annex A (informative) Determination of moisture content of adhesive or wet iron ores ... 15 Annex B (normative) Corrections for sprinkled water and/or rainwater ... 17 Annex C (informative) Precision of moisture measurement ... 23 Annex D (informative) Examples of test reports ... 24 Foreword This document was drafted in accordance with the rules given in GB/T 1.1-2020, Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents. This document is Part 5 of GB/T 10322. The following parts have been published under GB/T 10322. -- Iron ores - Sampling and sample preparation procedures; -- Iron ores - Experimental methods for evaluation of quality variation; -- Iron ores - Experimental methods for checking the precision of sampling; -- Iron ores - Experimental methods for checking the bias of sampling; -- Iron ores - Determination of the moisture content of a lot; -- Iron ores for blast furnace feedstocks - Determination of the decrepitation index; -- Iron ores and direct reduced iron - Determination of size distribution by sieving; -- Iron ores - Single-point determination of specific surface area - Nitrogen adsorption method. This document replaces GB/T 10322.5-2016 Iron ores - Determination of the moisture content of a lot. Compared with GB/T 10322.5-2016, the main technical changes are as follows: a) Change the normal reference method for determining the moisture content (see 7.2.2; 7.2.2 of the 2016 edition); b) Add alternative methods for determining the moisture content (see 7.3); c) Change the accuracy requirements for the weighing device (see 5.3; 5.3 of the 2016 edition); d) Change the calculation and presentation of results (see Chapter 9; Chapter 9 of the 2016 edition). This document is identical to ISO 3087:2020, Iron ores - Determination of the moisture content of a lot. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying patents. Iron ores - Determination of the moisture content of a lot 1 Scope This document specifies a method for the determination of the moisture content of a lot of iron ore. This document is applicable to all iron ores, whether natural or processed. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO3082, Iron ores - Sampling and sample preparation procedures Note: GB/T 10322.1-2023, Iron ores - Sampling and sample preparation procedures (ISO 3082:2017, IDT) ISO 3085, Iron ores - Experimental methods for checking the precision of sampling Note: GB/T 10322.3-2000, Iron ores - Experimental methods for checking the precision of sampling (ISO 3085:1996, IDT) ISO 3086, Iron ores - Experimental methods for checking the bias of sampling Note: GB/T 10322.4-2014, Iron ores - Experimental methods for checking the bias of sampling (ISO 3086:2006, IDT) ISO 11323, Iron ore and direct reduced iron - Vocabulary Note: GB/T 20565-2022, Iron ores and direct reduced iron - Vocabulary (ISO 11323:2010, IDT) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 11323 apply. ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.