GB 5763-2018 PDF in English
GB 5763-2018 (GB5763-2018) PDF English
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB 5763-2018 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Brake linings for automobiles
| Valid |
GB 5763-2008 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Brake linings for automobiles
| Obsolete |
GB 5763-1998 | English | 399 |
Add to Cart
|
3 days
|
Brake linings for automobiles
| Obsolete |
GB 5763-1986 | English | RFQ |
ASK
|
3 days
|
Brake linings for automobiles
| Obsolete |
Standards related to (historical): GB 5763-2018
PDF Preview
GB 5763-2018: PDF in English GB 5763-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.40
Q 69
Replacing GB 5763-2008
Brake Linings for Automobiles
ISSUED ON. NOVEMBER 19, 2018
IMPLEMENTED ON. OCTOBER 1, 2019
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Basic Requirements Regarding Health and Safety ... 8
5 Test Methods ... 10
6 Inspection Rules ... 10
7 Marking, Packaging, Transportation and Storage ... 11
Foreword
This Standard is compulsory in full-text.
This Standard is drafted in accordance with the stipulations in GB/T 1.1-2009.
This Standard serves as a replacement of GB 5763-2008 Brake Linings for
Automobiles. In comparison with GB 5763-2008, there are several main technical
changes as follows.
---Compulsory in provisions is modified into compulsory in full-text (please refer to
this Foreword; Foreword in Version 2008);
---There are changes in normative references (please refer to Chapter 2; Chapter
2 in Version 2008);
---All terms and definitions are modified (please refer to Chapter 3; Chapter 3 in
Version 2008);
---Classification is deleted (please refer to Chapter 4 in Version 2008);
---“Technical Requirements” is modified into “Basic Requirements Regarding
Health and Safety” (please refer to Chapter 4; Chapter 5 in Version 2008);
---The technical requirements and corresponding test methods of “appearance
quality”, “dimensional deviation”, “impact strength”, “thermal expansion rate”
and “compressive strain” are deleted (please refer to 5.1, 5.2, 5.5, 5.6 and 5.7
in Version 2008; 6.1, 6.2, 6.4, 6.5, 6.6 and 6.7);
---The requirements and test methods of “harmful elements limit” are added
(please refer to 4.1, 5.1 and 5.2);
---The friction performance requirement is modified from “friction coefficient of
various test temperatures of constant-speed friction test, allowable deviation of
appointed friction coefficient and abrasion rate” into “small sample bench test
room temperature and high-temperature friction coefficient of drum brake lining
adopted on Type-M1, Type-M2, Type-N1, Type-O1, Type-O2 vehicle” and “disc
lining and working friction coefficient deviation of drag test of friction
performance of drum brake lining adopted on Type-M3, Type-N2, Type-N3,
Type-O3, Type-O4 vehicle”; test method is also correspondingly modified
(please refer to 4.2 and 5.3; 5.3 and 6.3 in Version 2008);
---The requirement that “shear strength of bonded rubber base drum brake lining
at room temperature shall be not less than 1.0 MPa; the area of lining that
remains on the shoe after test shall be not less than 70%” is added (please
refer to 4.3);
Brake Linings for Automobiles
1 Scope
This Standard specifies the terms and definitions, the basic requirements regarding
health and safety, test methods, inspection rules, marking, packaging, transportation
and storage of brake linings for automobiles.
This Standard is applicable to brake linings for automobiles (hereinafter referred to as
“linings”).
2 Normative References
The following documents are indispensable to the application of this Standard. In terms
of references with a specified date, only versions with a specified date are applicable
to this Standard. The latest version (including all the modifications) of references
without a specified date is also applicable to this Standard.
GB/T 5620 Road Vehicles - Braking of Automotive Vehicles and Their Trailers -
Vocabulary
GB/T 15089 Classification of Power-driven Vehicles and Trailers
GB/T 17469 Characteristics Evaluation of Brake Lining for Automobile - Small Sample
Bench Test Method
GB/T 22309 Road Vehicles - Brake Linings - Shear Test Procedure for Disc Brake Pad
and Drum Brake Shoe Assemblies
GB/T 23263 Determination of Asbestos in Products
GB/T 34007 Road Vehicles - Brake Lining Friction Materials - Drag Test Method for
Friction Performance
JC/T 2268 Measurement of Copper and Other Elements in Brake Friction Materials
3 Terms and Definitions
What is defined in GB/T 5620 and GB/T 15089, and the following terms and definitions
are applicable to this document.
3.1 Coefficient of Friction
Coefficient of friction refers to the ratio of the tangential force (namely, friction) that
working friction coefficient;
b) After the test is completed, the lining shall manifest no stratification or chip-
falling, etc.
4.3 Shear Strength
4.3.1 The shear strength of bonded resin base drum lining at room temperature shall
be not less than 1.5 MPa.
4.3.2 The shear strength of bonded rubber base drum lining at room temperature shall
be not less than 1.0 MPa; after the test, the area of lining that remains on the shoe
shall not be less than 70%.
4.3.3 The shear strength of bonded disc lining at room temperature shall be not less
than 2.5 MPa.
5 Test Methods
5.1 Determination of Asbestos Content
The determination of asbestos content shall comply with GB/T 23263.
5.2 Determination of Harmful Elements
The determination of cadmium, hexavalent chromium, lead and mercury shall comply
with JC/T 2268.
5.3 Friction Performance Test
5.3.1 Small sample bench test
The small sample bench test of friction performance of drum lining adopted on Type-
M1, Type-M2, Type-N1, Type-O1, Type-O2 vehicle shall comply with GB/T 17469.
5.3.2 Friction performance drug test
The friction performance drag test of disc lining, and drum lining adopted on Type-M3,
Type-N2, Type-N3, Type-O3, Type-O4 vehicle shall comply with GB/T 34007.
5.4 Shear Strength Test
Shear strength test shall comply with GB/T 22309.
6 Inspection Rules
6.1 Inspection Items
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|