GB 32030-2015 PDF in English
GB 32030-2015 (GB32030-2015) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB 32030-2015 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Minimum allowable values of energy efficiency and energy efficiency grades for submersible pumps for deep well
| Obsolete |
| GB 32030-2022 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Minimum allowable values of energy efficiency and energy efficiency grades for submersible motor-pumps
| Valid |
Newer version: GB 32030-2022 Standards related to: GB 32030-2022
PDF Preview
GB 32030-2015: PDF in English GB 32030-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Submersible
Pumps for Deep Well
ISSUED ON. SEPTEMBER 18, 2015
IMPLEMENTED ON. OCTOBER 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Forward ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Basic Requirements ... 5
5 Energy Efficiency Grades ... 5
6 Minimum Allowable Values of Energy Efficiency ... 7
7 Evaluating Values of Energy Conservation ... 7
8 Test Methods ... 7
9 Inspection Rules ... 8
10 Labels of Energy Efficiency Grades ... 9
Forward
The Chapter 6 in this Standard is mandatory, while the rest are recommended.
This standard was drafted as per the rules specified in GB/T 1.1-2009.
This standard was proposed by the Resource Conservation and Environmental
Protection Division of the National Development and Reform Commission, as well as
the Department of Energy Conservation and Resources Utilization of the Ministry of
Industry and Information Technology.
This standard shall be under the jurisdiction of National Technical Committee for
Standardization of Energy Fundamentals and Management (SAC/TC 20), and
National Technical Committee on Agricultural Machinery of Standardization (SAC/TC
201).
Drafting organizations of this Standard. Technical Research Center of Fluid Machinery
Engineering in Jiangsu University, Chinese Academy of Agricultural Mechanization
Sciences, Shandong Celebrity Group Co., Ltd., Shanxi Skysea Pump Industry Co.,
Ltd., Shandong Yanshan Pump Co., Ltd., Haicheng Suprasuny Pump Co., Ltd.,
Taizhou Jiadi Pump Industry Co., Ltd., Shimge Pump Group Industry Co., Ltd., Leo
Group Co., Ltd., Hangzhou SRT Pump Co., Ltd., Zhejiang Dayuan Pumps Industrial
Co., Ltd., Zhejiang Fengyuan Pump Industry Co., Ltd., and Zhejiang Wenling Institute
of Supervision & Testing on Product Quality.
Chief drafting staffs of this Standard. Wang Yang, Zhang Xiansheng, Zhou Jianquan,
Shang Huaiyuan, Wang Lei, Zhao Liwei, Li Lulu, Chen Xianyuan, Xu Mintian, Wang
Xiangrong, Lu Qiurong, Wang Guoliang, Sun Jianguo, Jin Shibin, and Zhang Jinfeng.
Minimum Allowable Values of Energy Efficiency
and Energy Efficiency Grades for Submersible
Pumps for Deep Well
1 Scope
This Standard specifies the energy efficiency grades, minimum allowable values of
energy efficiency, evaluating values of energy conservation, test methods, inspection
rules, and labels of energy efficiency grades for submersible pumps for deep well.
This Standard is applicable to the submersible pumps for deep well (hereinafter
referred to as “pump”), which integrates pumps with the submersible motor for deep
well to submerge into water and extract clear water.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this standard.
GB/T 2816 Submersible Pumps for Deep Well
GB/T 2818 Submersible Motor for Deep Well
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1. Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-Lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes
(Apply to Inspection of Process Stability)
GB/T 12785-2014 Test Methods for Submersible Motor-Pumps
3 Terms and Definitions
The following terms and definitions and those defined in GB/T 2816, GB/T 2818 are
applicable to this document.
3.1 Minimum allowable values of energy efficiency for submersible
disqualified.
If one of the test results of both specimen pumps does not conform to the
requirements of Energy Efficiency Grade 3, then the standby specimen pump needs
to be tested; if the test result of the standby specimen pump conforms to the
requirements of corresponding energy efficiency grade specified in this Standard,
then the energy efficiency grade of such batch pumps shall be determined by the
energy efficiency grade to that the two specimen pumps can reach, or the lower
energy efficiency grade to that one of the two specimen can reach; if the test result of
the standby specimen pump does not conform to the requirements of Energy
Efficiency Grade 3, then the minimum allowable values of energy efficiency for such
batch pumps are determined as disqualified.
10 Labels of Energy Efficiency Grades
10.1 The manufacturer shall determine the rated energy efficiency grades for the
pump according to the provisions of this Standard and the inspection results; the label
shall be marked as per the requirements of labels of energy efficiency.
10.2 The manufacturer shall at least indicate the rated energy efficiency grade and
executive standard number of the pump in the product instructions; meanwhile, in
accordance with the relevant provisions of labels of energy efficiency, the label of
energy efficiency shall be pasted at an obvious position of the product.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|