GB 31646-2018 PDF in English
GB 31646-2018 (GB31646-2018) PDF English
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB 31646-2018 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
National food safety standard -- Hygienic specification for production and operation of frozen foods
| Valid |
Standards related to (historical): GB 31646-2018
Preview PDF (Powered by Google. Reload if blank, scroll for next page)
GB 31646-2018: PDF in English GB 31646-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National Food Safety Standard - Hygienic Regulation
for Production and Operation of Frozen Foods
ISSUED ON. JUNE 21, 2018
IMPLEMENTED ON. JUNE 21, 2019
Issued by. National Health Commission of the PRC;
State Administration for Market Regulation.
Table of Contents
1 Scope ... 3
2 Terms and Definitions ... 3
3 Site Selection and Plant Environment ... 3
4 Factory and Workshop ... 3
5 Facilities and Equipment ... 4
6 Hygienic Management ... 5
7 Food Ingredients, Food Additives and Food Related Products ... 5
8 Food Safety Control in the Production Process ... 6
9 Inspection ... 7
10 Storage and Transportation of Food ... 7
11 Product Recall Management ... 9
12 Training ... 9
13 Management System and Personnel ... 9
14 Record and Document Management ... 9
15 End sales of Products ... 10
Appendix A Microbial Monitoring Procedure for the Quick-Frozen Cooked
Foods during Processing Period ... 11
National Food Safety Standard – Hygienic Regulation
for Production and Operation of Frozen Foods
1 Scope
This Standard specifies the basic requirements and management guidelines for the
places, facilities, equipment and personnel during the procuring, processing,
packaging, storing, transporting and selling periods of the quick-frozen food raw
materials.
This Standard is applicable to the quick-frozen foods; and inapplicable to the frozen
drinks.
2 Terms and Definitions
The following terms and definitions and those ones stipulated in GB 14881-2013 are
applicable to this document.
2.1 Quick-frozen
The freezing method that makes the product quickly pass through its maximum ice-
crystal area; and finish the processing technology, when its center temperature
reaches -18°C.
2.2 Quick-frozen food
The food that is produced by a quick-freezing process, and enters into the market
under the cold chain conditions.
3 Site Selection and Plant Environment
It shall conform to the relevant provisions of Clause 3 in GB 14881-2013.
4 Factory and Workshop
4.1 Design and layout
6 Hygienic Management
6.1 Hygienic management system
It shall conform to the provisions of 6.1 in GB 14881-2013.
6.2 Hygienic management of factory and facilities
It shall conform to the provisions of 6.2 in GB 14881-2013.
6.3 Health management and hygienic requirements for the food processing
personnel
It shall conform to the provisions of 6.3 in GB 14881-2013.
6.4 Pest control
It shall conform to the provisions of 6.4 in GB 14881-2013.
6.5 Waste treatment
It shall conform to the provisions of 6.5 in GB 14881-2013.
6.6 Workwear management
6.6.1 It shall conform to the relevant provisions of 6.6 in GB 14881-2013.
6.6.2 The workwear in all zones shall be cleaned and disinfected regularly to meet the
hygienic requirements of each zone.
7 Food Ingredients, Food Additives and Food Related
Products
7.1 General requirements
It shall conform to the relevant provisions of 7.1 in GB 14881-2013.
7.2 Food ingredients
7.2.1 The food ingredients shall conform to the relevant provisions of 7.2 in GB 14881-
2013.
7.2.2 The ingredients with special requirements for the storage environment shall take
effective measures to monitor the temperature and humidity of the storage
environment.
8.2 Microbial contamination control
8.2.1 It shall conform to the relevant provisions of 8.2 in GB 14881-2013.
8.2.2 According to the characteristics of the frozen food produced, determine the key
links of the microbial monitoring in the environment and production process; especially
the processing of the quick-frozen cooked food, which shall be monitored as per the
requirements of Appendix A; if necessary, establish the pathogen monitoring procedure
during the food processing process, which include pathogen monitoring for the
production environment, and pathogen monitoring for the process products.
8.2.3 When there is an abnormality of the monitoring indicators in the end of production
line of quick-frozen cooked food, cause shall be found immediately; such as increase
the sampling frequency of environment microbial monitoring or increase the sampling
points; and take appropriate corrective measures.
8.3 Control of chemical pollution
It shall conform to the relevant provisions of 8.3 in GB 14881-2013.
8.4 Control of physical pollution
It shall conform to the relevant provisions of 8.4 in GB 14881-2013.
8.5 Package
8.5.1 It shall conform to the relevant provisions of 8.5 in GB 14881-2013.
8.5.2 The packaging operation of the quick-frozen product shall be carried out in an
environment where the temperature can be controlled.
8.5.3 The packaging section shall be established metal detector, and keep valid.
9 Inspection
It shall conform to the relevant provisions of Clause 9 of GB 14881-2013.
10 Storage and Transportation of Food
10.1 General requirements
It shall conform to the relevant provisions of Clause 10 in GB 14881-2013; Clause 3
and 5 in GB 31621-2014.
10.2 Storage
temperature and working time; ensure the product temperature shall be no greater
than -12°C; the working environment shall ensure the hygienic conditions. If there is
no closed loading/unloading port, then the transportation vehicle door shall be kept
open and close at any required time.
10.3.7 When products are loaded/unloaded, the cargo shall be piled up tightly; there
shall be gap around the wall to keep air circulation.
10.3.8 The maximum temperature of the products during the transporting process shall
be no greater than -12°C; however, after loading/unloading, it shall be reduced to -
18°C or below as soon as possible. The products with special temperature
requirements shall be implemented as agreed by both parties.
11 Product Recall Management
It shall conform to the relevant provisions of Clause 11 in GB 14881-2013.
12 Training
It shall conform to the relevant provisions of Clause 12 in GB 14881-2013.
13 Management System and Personnel
It shall conform to the relevant provisions of Clause 13 in GB 14881-2013.
14 Record and Document Management
14.1 It shall conform to the relevant provisions of Clause 14 in GB 14881-2013.
14.2 For the key processes and links that have clear temperature requirements, the
appropriate monitoring frequency shall be determined and recorded.
14.3 The document management system shall be established to effectively manage
the documents and ensure that the documents used in the relevant locations are valid.
14.4 The hygienic regulation management system and measures that enterprises need
to formulate shall be clearly defined; and form effective document to implement.
ingredients procurement, acceptance and management; safety management during
the production process; storage management; equipment and facilities management;
non-conforming product management; inspection management; product traceability
and recall system; hygienic management (pest control, personnel hygiene, equipment
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|