GB 18351-2017 PDF in English
GB 18351-2017 (GB18351-2017) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB 18351-2017 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Ethanol gasoline for motor vehicles (E10)
| Valid |
| GB 18351-2015 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Ethanol gasoline for motor vehicles (E10)
| Obsolete |
| GB 18351-2013 | English | 279 |
Add to Cart
|
3 days
|
Ethanol gasoline for motor vehicles (E10)
| Obsolete |
| GB 18351-2010 | English | 279 |
Add to Cart
|
3 days
|
Ethanol gasoline for motor vehicles (E10)
| Obsolete |
| GB 18351-2004 | English | 679 |
Add to Cart
|
5 days
|
Ethanol gasoline for motor vehicles [including MODIFICATION 1]
| Obsolete |
| GB 18351-2001 | English | 479 |
Add to Cart
|
4 days
|
Ethanol gasoline for motor vehicles [including MODIFICATION 1]
| Obsolete |
Standards related to (historical): GB 18351-2017
PDF Preview
GB 18351-2017: PDF in English GB 18351-2017
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 75.160.20
E 31
Replacing GB 18351-2015
Ethanol gasoline for motor vehicles (E10)
ISSUED ON. SEPTEMBER 07, 2017
IMPLEMENTED ON. SEPTEMBER 07, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 7
4 Product classification ... 8
5 Requirements and test methods ... 8
6 Sampling ... 9
7 Marking, packaging, transportation and storage ... 9
8 Safety ... 9
9 Implementation of standard ... 9
Appendix A (Normative) Technical requirements and test methods for No.98
ethanol gasoline for motor vehicles (E10) ... 14
References ... 17
Foreword
Chapter 5 of this standard is mandatory and the rest is recommended.
This standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This standard replaces GB 18351-2015 “Ethanol gasoline for motor vehicles
(E10)”.
As compared with GB 18351-2015, the main technical changes of this
standard are as follows.
- MODIFY the second paragraph of Chapter 1 Scope from “This standard is
applicable to the ethanol gasoline for motor vehicles (E10) which is
manufactured by adding a certain amount of denatured fuel ethanol and
the performance improvement additive into the liquid hydrocarbons without
adding oxygenated compounds” into “This standard is applicable to the
ethanol gasoline for motor vehicles (E10) which is manufactured by adding
a certain amount of denatured fuel ethanol and the performance
improvement additive into the vehicle ethanol gasoline blending
component oil without adding oxygenated compounds” (SEE Chapter 1;
Chapter 1 of 2015 version);
- DELETE the technical requirements and test methods (Table 1 of 2015
version) of the ethanol gasoline for motor vehicles (E10) (IV); ADD the
technical requirements of the phase IV ethanol gasoline for motor vehicles
(E10), and DIVIDE it into phase VI A and phase VI B based on the
differences of olefin content (SEE Table 2, Table 3);
- In the vapor pressure requirements, ADD that “During seasonal change, it
is allowed for the refueling station to have a 15-day replacement period”
(SEE Table 1, Table 2, Table 3, Table A.1, and footnote b to Table A.2 in
Appendix);
- DELETE the technical requirements for quantitative determination of
mercaptan sulfur (Table 2 Table A.1 in the Appendix of 2015 version);
- MODIFY the Chapter 9 “Implementation of standard” (SEE Chapter 9;
Chapter 9 of 2015 version);
- ADD the Table A.2 in Appendix A (SEE Table A.2 in Appendix A).
This standard was proposed by the National Energy Board.
This standard shall be under the jurisdiction of the National Standardization
Technical Committee for Petroleum Products and Lubricants (SAC/TC 280).
Ethanol gasoline for motor vehicles (E10)
WARNING - If proper precautions are not taken, the products in this
standard may be hazardous during the production, storage and use. This
standard is not intended to advise on all safety issues related to this
product. It is the responsibility of the user to adopt appropriate safety
and health measures and to ensure compliance with the conditions set
forth in the relevant national regulations.
1 Scope
This standard specifies the terms and definitions, product classification,
requirements and test methods, sampling, marking, packaging, transportation
and storage, safety and standard implementation of the ethanol gasoline for
motor vehicles (E10).
This standard is applicable to the ethanol gasoline for motor vehicles (E10)
which is manufactured by adding a certain amount of denatured fuel ethanol
and the performance improvement additive into the vehicle ethanol gasoline
blending component oil without adding oxygenated compounds.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB 190 Labels for packages of dangerous goods
GB/T 259 Determination of water-soluble acids and bases in petroleum
products
GB/T 503 Determination of the gasoline octane number – Test method for
motor octane number
GB/T 511 Petroleum products and additives – Determination of mechanical
impurities
GB/T 1884 Crude petroleum and liquid petroleum products – Laboratory
determination of density – Hydrometer method
GB/T 1885 Petroleum measurement tables
GB/T 4756 Method for manual sampling of petroleum liquids
GB/T 5096 Test method for corrosiveness to copper from petroleum
products by copper strip test
GB/T 5487 Determination of gasoline octane number – Test method for
research octane number
GB/T 6536 Standard test method for distillation of petroleum products at
atmospheric pressure
GB/T 8017 Standard test method for vapor pressure of petroleum products
(Reid method)
GB/T 8018 Determination of oxidation stability of gasoline - Induction period
method
GB/T 8019 Standard test method for gum content in fuels – By jet
evaporation
GB/T 8020 Determination of lead in gasoline - Atomic absorption
spectrometry
GB/T 11132 Standard test method for hydrocarbon types in liquid petroleum
products by fluorescent indicator absorption
GB/T 11140 Standard test method for sulfur in petroleum products by
wavelength dispersive X-ray fluorescence spectrometry
GB 18350 Denatured fuel ethanol
GB/T 22030 Blendstocks of ethanol gasoline for motor vehicles
GB/T 28768 Determination of hydrocarbon types and oxygenates in
automotive-motor gasoline by multidimensional gas chromatography
method
GB 30000.7-2013 Rules for classification and labelling of chemicals – Part
7. Flammable liquids
GB/T 30519 Determination of hydrocarbon types and benzene in light
petroleum distillates and products – Multidimensional gas chromatographic
method
SH/T 0164 Rules for the packing, storage and delivery acceptance of
petroleum products
NB/SH/T 0174 Tests of thiols and other sulfides in petroleum products and
hydrocarbon solvents – Doctor test method
SH/T 0246 Determination method of water content in light petroleum
products (colorimetric method)
SH/T 0253 Determination method for total sulfur content in light petroleum
products (colorimetric method)
SH/T 0604 Crude petroleum and petroleum products – Determination of
density – Oscillating U-tube method
NB/SH/T 0663 Standard test method for determination of certain alcohols
and ethers in gasoline by gas chromatography
SH/T 0689 Standard test method for determination of total sulfur in light
hydrocarbons motor fuels and oils by ultraviolet fluorescence
SH/T 0693 Standard test method for determination of benzene, toluene,
ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total
aromatics in finished gasoline by gas chromatography
SH/T 0711 Standard test method for manganese in gasoline by atomic
absorption spectroscopy
SH/T 0712 Standard test method for iron in gasoline by atomic absorption
spectroscopy
SH/T 0713 Standard test method for determination of benzene and toluene
in finished motor and aviation gasoline by gas chromatography
SH/T 0720 Standard test method for determination of oxygenates in
gasoline by gas chromatography and oxygen selective flame ionization
detection
NB/SH/T 0741 Standard test method for determination of hydrocarbon
types composition in gasoline by multidimensional gas chromatography
SH/T 0794 Standard test method for vapor pressure of petroleum products
(mini method)
ASTM D7039 Standard test method for sulfur in gasoline, diesel fuel, jet
fuel, kerosene, biodiesel, biodiesel blends, and gasoline-ethanol blends by
monochromatic wavelength dispersive X-ray fluorescence spectrometry
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Antiknock index
A half of the sum of the research octane number (RON) and the motor
octane number (MON).
[GB 17930-2016, definition 3.1]
3.2
6 Sampling
Sampling is made in accordance with GB/T 4756, AND 4 L is taken for the
purposes of inspection and sample retention. It shall avoid light when taking
sample.
7 Marking, packaging, transportation and storage
7.1 Marking, packaging, transportation and storage and delivery acceptance
shall be carried out in accordance...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|