SN/T 3587-2016 Related standards

SN/T 3587-2016 (SN/T3587-2016, SNT 3587-2016, SNT3587-2016) & related versions
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)
SN/T 3587-2016 165 Add to Cart Auto, < 3 mins Textiles for import and export--Determination of residual admides solvent--Gas chromatography-mass spectrometry method
SN/T 3587-2013 279 Add to Cart 3 days Determination of N, N-dimethylformamide and N, N-dimethylacetamide in textile for import and export. Gas chromatography-Mass method
Standard ID SN/T 3587-2016 (SN/T3587-2016)
Description (Translated English) Textiles for import and export--Determination of residual admides solvent--Gas chromatography-mass spectrometry method
Sector / Industry Commodity Inspection Standard (Recommended)
Classification of Chinese Standard W55
Classification of International Standard 59.080.01
Word Count Estimation 8,846
Date of Issue 2016-06-28
Date of Implementation 2017-02-01
Older Standard (superseded by this standard) SN/T 3587-2013
Drafting Organization Shenzhen Inspection and Quarantine Science Research Institute, the People's Republic of China Shenzhen Entry-Exit Inspection and Quarantine Bureau
Administrative Organization National Certification and Accreditation Administration Committee
Regulation (derived from) State-Quality-Inspection-Accredidation [2016] No.318
Proposing organization National Certification and Accreditation Administration Committee
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Preview PDF: SN/T 3587-2016

SN/T 3587-2016: PDF in English (SNT 3587-2016)
SN/T 3587-2016
Replacing SN/T 3587-2013
Textiles for import and export - Determination of
residual admides solvent - Gas chromatography-mass
spectrometry method
ISSUED ON: JUNE 28, 2016
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of PRC
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Principle ... 4 
3 Reagents and materials ... 4 
4 Instruments and equipment... 5 
5 Analytical procedures ... 5 
6 Calculation of results ... 7 
7 Low limit of determination ... 7 
8 Recovery rate ... 8 
9 Precision ... 8 
10 Test report ... 8 
Appendix A (Informative) Reference qualitative and quantitative ions for amide
compounds ... 9 
Appendix B (Informative) Gas chromatography-mass spectrometry
chromatogram of amide standard substances ... 10 
Textiles for import and export - Determination of
residual admides solvent - Gas chromatography-mass
spectrometry method
1 Scope
This standard specifies the gas chromatograph-mass spectrometry method, for
the detection of 5 residual amide solvents (see Appendix A) in textiles.
This standard applies to the determination of the 5 residual amide solvents in
various textile materials and their products.
2 Principle
The sample is ultrasonically extracted by methanol, concentrated to a constant
volume. The sample solution is measured by a gas chromatography-mass
spectrometer. It is subject to qualitative determination by full scan detection,
AND quantification by external standard method by the use of selective ion.
3 Reagents and materials
3.1 Methanol: Chromatographically pure.
3.2 The 5 types of amide standard materials: Purity ≥ 95%; please refer to
Appendix A.
3.3 Standard stock solution: Weigh the appropriate amount of amide standard
substance (3.2), respectively. Use methanol (3.1) to prepare standard stock
solution, which has a concentration of 1000 mL. Contain it in a brown bottle.
Note: The standard stock solution is stored in a refrigerator at 0 °C ~ 4 °C in the dark.
The validity period is 3 months.
3.4 Series of standard working solutions: Accurately pipette a certain volume of
standard stock solution (3.3) as needed. Use methanol (3.1) to dilute it into a
series of mixed standard working solutions of appropriate concentration.
Note: The standard working solution is prepared before use. The linear range, which
is measured under different working conditions by different instruments, is different.
The linearity of the concentration range of the standard solution of 5 amide compounds,
b) Column temperature: ;
c) Inlet temperature: 230 °C:
d) Temperature at the interface of mass spectrometer: 280 °C;
e) Temperature of ion source: 220 °C;
f) Quadrupole's temperature: 150 °C;
g) Ionization method: EI;
h) Ionization energy: 70 eV;
i) Injection volume: 1.0 µL;
j) Sampling mode: Pulse-split injection, which has a split ratio of 20:1;
k) Carrier gas: Helium (purity ≥ 99.999%), which has a flow rate 0.8 mL/min;
l) Solvent delay: 3 min;
m) Measurement method: Full scan (SCAN) and selective ion monitoring
(SIM) are performed at the same time. Refer to Appendix A for selective
5.2.2 Qualitative and quantitative analysis by gas chromatography/mass
According to the content of the analyte in the sample solution, select a standard
working solution, which has a similar concentration. The response values of the
amide compounds in BOTH the standard working solution AND the sample
solution to be tested shall be within the linear range of the instrument detection.
Standard working solution and sample solution are interleaved at equal volume,
for the purposes of determination.
This standard uses the full scan mode for qualitative; it uses selective ion
monitoring mode for quantitative. For the selection of qualitative ions and
quantitative ions, refer to Appendix A. BOTH the standard solution AND the
sample solution are tested according to the conditions specified in 5.2.1. If, in
the sample solution, there appears a peak, at the same retention time as the
standard solution, THEN, the selective ion shall be confirmed. Through
confirmation and analysis, if all of the following conditions are met [Translator
note: the sentences are restructured as follows]:
- The retention time of the chromatographic peak of the analyte is consistent
with that of the standard substance;
8 Recovery rate
Quantitatively add a standard solution, which has an appropriate known
concentration, into the specimen. Perform recovery rate analysis according to
5.2.1. The recovery rate of 5 types of amide compounds is 80% ~ 110%.
9 Precision
In the same laboratory, when the same operator uses the same equipment,
according to the same test method, to test the same tested object independently
in a short time, the absolute value of the two test results obtained is not greater
than 10% of the arithmetic mean of the two measured values, under the premise
of 95% confidence.
10 Test report
The test report shall at least provide the following:
a) Sample source and description;
b) The standards used;
c) The test method used;
d) Test results;
e) Any details that deviate from this standard.