GB/T 16716.2-2018 Related standards

GB/T 16716.2-2018 (GB/T16716.2-2018, GBT 16716.2-2018, GBT16716.2-2018) & related versions
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)
GB/T 16716.2-2018 170 Add to Cart Auto, < 3 mins Packaging and the environment -- Part 2: Optimization of the packaging system
GB/T 16716.2-2010 85 Add to Cart Auto, < 3 mins Packaging and packaging waste -- Part 2: Means and program for evaluation
BASIC DATA
Standard ID GB/T 16716.2-2018 (GB/T16716.2-2018)
Description (Translated English) Packaging and the environment -- Part 2: Optimization of the packaging system
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A80
Classification of International Standard 55.020
Word Count Estimation 26,287
Date of Issue 2018-12-28
Date of Implementation 2018-12-28
Older Standard (superseded by this standard) GB/T 16716.3-2010
Drafting Organization Jiangyin Shenghui Packaging Materials Co., Ltd., China Export Commodity Packaging Research Institute, Guangzhou Superior Testing Technology Service Co., Ltd., Shenzhen Printing Industry Association, Beijing Pharmaceutical Packaging Materials Inspection Institute, Guangdong Zhigao Air Conditioning Co., Ltd., Zhanjiang Cigarette Packaging Materials Printing Co., Ltd. Dalian Standardization Research Institute, Jinan Blu-ray Electromechanical Technology Co., Ltd., Changchun Jingyue Packing Co., Ltd., Qingdao Yongchang Plastic Industry Co., Ltd.
Administrative Organization National Packaging Standardization Technical Committee
Proposing organization National Standardization Management Committee

Preview PDF: GB/T 16716.2-2018

GB/T 16716.2-2018: PDF in English (GBT 16716.2-2018)
GB/T 16716.2-2018
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 55.020
A 80
Replacing GB/T 16716.3-2010
Packaging and the environment - Part 2: Optimization of the
packaging system
(ISO 18602:2013, Packaging and the environment - Optimization of the packaging
system, MOD)
ISSUED ON: DECEMBER 28, 2018
IMPLEMENTED ON: DECEMBER 28, 2018
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
Introduction ... 6 
1 Scope ... 8 
2 Normative references ... 8 
3 Terms and definitions ... 8 
4 Requirements ... 10 
5 Assessment content for optimization of the packaging system ... 12 
Annex A (Informative) Assessment of optimization of the packaging system ... 14 
Annex B (Informative) Examples of the application of assessment checklist for
packaging system optimization ... 20 
Annex C (Informative) Assessment and minimization of substances or mixtures
hazardous to the environment ... 26 
Annex D (Informative) List of standards based on which safety data sheet for chemical
products is formulated ... 39 
Bibliography ... 42 
Foreword
GB/T 16716 "Packaging and the environment" is divided into six parts:
- Part 1: General rules;
- Part 2: Optimization of the packaging system;
- Part 3: Reuse;
- Part 4: Material recycling;
- Part 5: Energy recovery;
- Part 6: Organic recycling.
This Part is Part 2 of GB/T 16716.
This Part is drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 16716.3-2010 "Packaging and packaging waste - Part 3:
Prevention by source reduction". Compared with GB/T 16716.3-2010, in addition to
editorial changes, the main technical changes of this Part are as follows:
- Add the Introduction;
- Modify the content of Scope (see Clause 1; Clause 1 of GB/T 16716.3-2010);
- Delete normative references CEN CR 13695-1 and CEN CR 13695-2 (see Clause
2 of GB/T 16716.3-2010);
- Add normative references GB/T 16483 and GB/T 17519 (see Clause 2);
- Delete the term and definition of "Prevention by source reduction" (see 3.1 of GB/T
16716.3-2010);
- Modify the terms and definitions about "Critical range of use reduction",
"Preparation", and "Safety data sheet" (see 3.2, 3.8, and 3.9; 3.2, 3.5, and 3.6 of
GB/T 16716.3-2010);
- Add terms and definitions of "Packaging optimization", "Packaging component",
"Packaging constituent", "Packaging system", "Packaging waste", and "Substances
hazardous to the environment" (see 3.1, 3.4, 3.5, 3.6, 3.10, and 3.11);
- Modify the relevant content of "Requirements" (see Clause 4; Clause 4 of GB/T
16716.3-2010);
- Modify the relevant content of "Assessment of optimization of the packaging
system" (see Annex A; Annex A of GB/T 16716.3-2010);
- Modify the relevant content of "Examples of the application of assessment
checklist for packaging system optimization" (see Annex B; Annex B of GB/T
16716.3-2010);
- Modify the relevant content of "Assessment and minimization of substances or
mixtures hazardous to the environment" (see Annex C; Annex C and Annex D of
GB/T 16716.3-2010);
- Delete the "Assessment flow chart for controlling the compliance of hazardous
substances" (see Annex D of GB/T 16716.3-2010).
This Part uses the redraft law to modify and adopt ISO 18602:2013 "Packaging and the
environment - Optimization of the packaging system".
Compared with ISO 18602:2013, this Part deletes 4.1 and C.2 in structure, and adds
Annex D.
The technical differences between this Part and ISO 18602:2013 and their reasons are
as follows:
- As for the normative references, this Part has made adjustments with technical
differences, to adapt to the technical conditions of China. The adjustments are
mainly reflected in Clause 2 “Normative references”. The specific adjustments are
as follows:
 Replace ISO 18601 with GB/T 16716.1 which modifies and adopts the
international standard;
 Replace ISO 21067 with GB/T 23156;
 Add reference to GB/T 16483;
 Add reference to GB/T 17519.
The following editorial change has been made to this Part:
- In order to be consistent with the existing standard system, change the name to
"Packaging and the environment - Part 2: Optimization of the packaging system".
This Part was proposed by and shall be under the jurisdiction of National Technical
Committee 49 on Packaging of Standardization Administration of China (SAC/TC 49).
Drafting organizations of this Part: Sunrise Packaging Material (Jiangyin) Co., Ltd.;
China National Export Commodities Packaging Research Institute; Guangzhou
Supreme Technology & Testing Service Co., Ltd.; Shenzhen Printing Association;
Beijing Pharmaceutical Packaging Materials Inspection Institute;
Packaging and the environment - Part 2: Optimization of the
packaging system
1 Scope
This Part of GB/T 16716 specifies the assessment requirements and contents for the
optimization of the packaging system.
This Part applies to the assessment of system optimization of all packaging or packaged
products placed on the market or delivered for use.
2 Normative references
The following documents are indispensable for the application of this document. For
the dated references, only the editions with the dates indicated are applicable to this
document. For the undated references, the latest edition (including all the amendments)
are applicable to this document.
GB/T 16483 Safety data sheet for chemical products - Content and order of sections
GB/T 16716.1 Packaging and the environment - Part 1: General rules (GB/T
16716.1-2018, ISO 18601:2013 MOD)
GB/T 17519 Guidance on the compilation of safety data sheet for chemical products
GB/T 23156 Packaging - Packaging and the environment - Terminology
3 Terms and definitions
The terms and definitions defined in GB/T 16716.1 and GB/T 23156 and the following
ones apply to this document.
3.1
Packaging optimization
Minimize the weight (volume) of the packaging in order to reduce the impact on the
environment, under the premise that primary packaging, secondary (combined)
packaging and tertiary (transport) packaging meet the functional needs, and that
consumers (users) can accept.
Note: The packaging system optimization in this Part does not include the selection and replacement
......