|
Std ID |
Description (Standard Title) |
Detail |
|
YD/T 3585-2019
|
(Communication application scenarios and requirements for civil unmanned aircraft)
|
YD/T 3585-2019
|
|
YD/T 3586-2019
|
(Technical requirements for user-based positioning services (second phase) Terminal)
|
YD/T 3586-2019
|
|
YD/T 3587-2019
|
(User plane-based positioning service test method (second stage) terminal)
|
YD/T 3587-2019
|
|
YD/T 3588.1-2019
|
(Technical requirements and test methods for indoor positioning of mobile communication terminals. Part 1: General)
|
YD/T 3588.1-2019
|
|
YD/T 3589-2019
|
(Technical requirements of telecommunication smart cards in M2M environment)
|
YD/T 3589-2019
|
|
YD/T 3590-2019
|
(Technical requirements and test methods for communication instructions (AT commands) between mobile terminal equipment and adapters)
|
YD/T 3590-2019
|
|
YD/T 3591-2019
|
(Technical requirements and detection method for charging performance of LTE-based voice service (VoLTE) charging system)
|
YD/T 3591-2019
|
|
YD/T 3592-2019
|
(Wireless communication technology based on LTE for car networking Technical requirements for base station equipment)
|
YD/T 3592-2019
|
|
YD/T 3593-2019
|
(Wireless communication technology based on LTE for car networking Core network equipment technical requirements)
|
YD/T 3593-2019
|
|
YD/T 3594-2019
|
General technical requirements of Security for Vehicular Communication based on LTE
|
YD/T 3594-2019
|
|
YD/T 3595.1-2019
|
(Technical requirements for big data management. Part 1: Management framework)
|
YD/T 3595.1-2019
|
|
YD/T 3596-2019
|
(Evaluation and testing method of personal data sharing in mobile internet environment)
|
YD/T 3596-2019
|
|
YD/T 3597-2019
|
(Technical requirements for mobile networks supporting smart factories in the petrochemical industry)
|
YD/T 3597-2019
|
|
YD/T 3598-2019
|
(Wavelength Switched Optical Network (WSON) Technical Requirements)
|
YD/T 3598-2019
|
|
YD/T 3599-2019
|
(Packet enhanced optical transport network (OTN) interworking test method)
|
YD/T 3599-2019
|
|
YD/T 3600-2019
|
(Technical requirements of software-defined optical transport network (SDOTN) controller based on traffic engineering network abstraction and control (ACTN))
|
YD/T 3600-2019
|
|
YD/T 3601-2019
|
(Telecommunication Internet data center chiller)
|
YD/T 3601-2019
|
|
YD/T 5054-2019
|
Classification Standard for Seismic Protection of Telecommunication Buildings
|
YD/T 5054-2019
|
|
YD/T 5060-2019
|
(Atlas of seismic design of communication equipment installation)
|
YD/T 5060-2019
|
|
YD/T 5094-2019
|
(Signaling Network Engineering Technical Specifications)
|
YD/T 5094-2019
|
|
YD/T 5100.1-2019
|
(Specification for testing seismic resistance of mobile communication base station equipment-Part 1: Base station)
|
YD/T 5100.1-2019
|
|
YD/T 5131-2019
|
Design Specifications of Structure for Mobile Communication Engineering Steel Tower and Mast
|
YD/T 5131-2019
|
|
YD/T 5139-2019
|
Design Specifications for Equipment Installation of Cable Access Network Engineering
|
YD/T 5139-2019
|
|
YD/T 5235-2019
|
Technical Specifications for Data Center Infrastructure Engineering
|
YD/T 5235-2019
|
|
YD/T 5238-2019
|
(Code for design of equipment installation engineering for distributed data computing platform)
|
YD/T 5238-2019
|
|
YD/T 5243-2019
|
(Multi-antenna common tower mast engineering design code)
|
YD/T 5243-2019
|
|
YD/T 5245-2019
|
(Digital cellular mobile communication network LTE micro base station engineering technical specifications)
|
YD/T 5245-2019
|
|
YD/T 5249-2019
|
(Information and communications equipment vibration adaptability test specification)
|
YD/T 5249-2019
|
|
YD/T 5251-2019
|
(Intelligent pipe engineering technical specifications)
|
YD/T 5251-2019
|
|
YD/T 1547-2019
|
(WCDMA digital cellular mobile communication network terminal equipment technical requirements (third stage))
|
YD/T 1547-2019
|
|
YD/T 1548.1-2019
|
Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase Ⅲ) -- Part 1: Basic Functions, Services and Performance
|
YD/T 1548.1-2019
|
|
YD/T 2583.17-2019
|
Requirement and Measurement Methods of Electromagnetic Compatibility for Mobile Telecommunications Equipment -- Part 17: 5G Base Station and Ancillary Equipment
|
YD/T 2583.17-2019
|
|
YD/T 2583.18-2019
|
Requirement and measurement methods of electromagnetic compatibility for cellular mobile telecommunication equipment -- Part 18: 5G user equipment and ancillary equipment
|
YD/T 2583.18-2019
|
|
YD/T 2864-2019
|
(Technical requirements for LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual-card multi-standby terminal)
|
YD/T 2864-2019
|
|
YD/T 2865-2019
|
(LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual-card multi-standby terminal equipment test method)
|
YD/T 2865-2019
|
|
YD/T 3604-2019
|
(Technical requirements for home base station gateway equipment of TD-LTE digital cellular mobile communication network)
|
YD/T 3604-2019
|
|
YD/T 3605-2019
|
(Technical requirements of LTE digital cellular mobile communication network terminal equipment (third stage))
|
YD/T 3605-2019
|
|
YD/T 3606-2019
|
(Test method for terminal equipment of LTE digital cellular mobile communication network (third stage))
|
YD/T 3606-2019
|
|
YD/T 3607-2019
|
(TD-LTE digital cellular mobile communication network base station equipment test method (third stage))
|
YD/T 3607-2019
|
|
YD/T 3608-2019
|
(LTE FDD digital cellular mobile communication network base station equipment test method (third stage))
|
YD/T 3608-2019
|
|
YD/T 3609-2019
|
(Information and Communication Industry Service Field Management Implementation Guide)
|
YD/T 3609-2019
|
|
YD/T 3610-2019
|
(Technical requirements for LTE Customer Premises Equipment (CPE))
|
YD/T 3610-2019
|
|
YD/T 3611-2019
|
(LTE Customer Premises Equipment (CPE) Test Method)
|
YD/T 3611-2019
|
|
YD/T 3612-2019
|
(Telecommunications network bad voice information disposal specifications)
|
YD/T 3612-2019
|
|
YD/T 3613-2019
|
(Open field test parameters and test methods of HF fixed radio monitoring and direction finding system)
|
YD/T 3613-2019
|
|
YD/T 3614-2019
|
(Technical coordination method of geostationary orbit satellite fixed service network)
|
YD/T 3614-2019
|
|
YD/T 3615-2019
|
5G mobile telecommunication network-general technical requirements of core network
|
YD/T 3615-2019
|
|
YD/T 3616-2019
|
Technical requirements for 5G mobile telecommunication network core network NF
|
YD/T 3616-2019
|
|
YD/T 3617-2019
|
Test methods for 5G mobile telecommunication network core network NF
|
YD/T 3617-2019
|
|
YD/T 3618-2019
|
5G digital cellular mobile telecommunication network-general requirements of wireless access network (Phase 1)
|
YD/T 3618-2019
|
|
YD/T 3619-2019
|
5G digital cellular mobile telecommunication network-Technical requirement and test method of NG interface(Phase 1)
|
YD/T 3619-2019
|
|
YD/T 3620-2019
|
5G digital cellular mobile telecommunication-Technical requirement and test method of Xn/X2 interface(Phase 1)
|
YD/T 3620-2019
|
|
YD/T 3621.1-2019
|
N×25Gbit/s WDM-PON for 5G fronthaul--Part 1: General requirements
|
YD/T 3621.1-2019
|
|
YD/T 3621.2-2019
|
N×25Gbit/s WDM-PON for 5G mobile Fronthaul--Part 2: PMD requirements
|
YD/T 3621.2-2019
|
|
YD/T 3622-2019
|
(Technical requirements for low-power short-range visible light communication)
|
YD/T 3622-2019
|
|
YD/T 3623-2019
|
(Access network technology requirements Ultra-high-speed digital subscriber line (FAST) equipment functions and management interfaces)
|
YD/T 3623-2019
|
|
YD/T 3624-2019
|
(Core network control plane network element virtualization Requirements for physical servers)
|
YD/T 3624-2019
|
|
YD/T 3625-2019
|
5G digital cellular mobile telecommunication network-technical requirements of passive antenna array (
|
YD/T 3625-2019
|
|
YD/T 3626-2019
|
5G digital cellular mobile telecommunication network-best methods of passive antenna array (
|
YD/T 3626-2019
|
|
YD/T 3627-2019
|
5G digital cellular mobile telecommunication network-technical requirements of eMBB user equipment (Phase 1)
|
YD/T 3627-2019
|
|
YD/T 3628-2019
|
5G mobile telecommunication network-Technical requirement of 5G security
|
YD/T 3628-2019
|
|
YD/T 1181.6-2020
|
(Characteristics of non-metallic reinforcements for optical cables Part 6: Fiberglass tape)
|
YD/T 1181.6-2020
|
|
YD/T 1644.1-2020
|
(Handheld and body-worn wireless communication equipment evaluation procedures for electromagnetic exposure to the human body Part 1: Equipment used close to the ear (frequency range 300MHz to 6GHz))
|
YD/T 1644.1-2020
|
|
YD/T 1813.2-2020
|
(Fiber amplifiers for communications Pump laser components Part 2: 14xxnm pump laser components)
|
YD/T 1813.2-2020
|
|
YD/T 1970.8-2020
|
(Technical requirements for maintenance of power supply system of communication bureau (station) Part 8: Power environment monitoring system)
|
YD/T 1970.8-2020
|
|
YD/T 2094.8-2019
|
(Security Assertion Markup Language Part 8: Identity Assurance Extension)
|
YD/T 2094.8-2019
|
|
YD/T 2244-2020
|
(Telecommunications network and Internet information service business system security protection testing requirements)
|
YD/T 2244-2020
|
|
YD/T 2283-2020
|
(Submarine cable)
|
YD/T 2283-2020
|
|
YD/T 2343-2020
|
(Front-end valve-regulated lead-acid battery for communication)
|
YD/T 2343-2020
|
|
YD/T 2378-2020
|
(240V DC power supply system for communication)
|
YD/T 2378-2020
|
|
YD/T 2379.10-2020
|
(Telecommunication equipment environmental test requirements and test methods. Part 10: Civil aircraft airborne equipment)
|
YD/T 2379.10-2020
|
|
YD/T 2786.6-2020
|
(Technical requirements for IP / MPLS network management supporting multiple service bearers Part 6: EMS-NMS interface information model based on XML / SOAP technology)
|
YD/T 2786.6-2020
|
|
YD/T 2796.4-2020
|
(Parallel transmission active optical cable optical module Part 4: 200Gb / s AOC)
|
YD/T 2796.4-2020
|
|
YD/T 2827.1-2020
|
(Passive intermodulation level measurement methods for radio frequency and microwave devices in wireless communications. Part 1: General requirements)
|
YD/T 2827.1-2020
|
|
YD/T 2844.6-2019
|
(Technical requirements for trusted environment of mobile terminals Part 6: Security interaction with security modules (SE))
|
YD/T 2844.6-2019
|
|
YD/T 2862-2020
|
(Technical requirements for LTE / WCDMA / GSM (GPRS) multimode dual card dual standby terminal equipment)
|
YD/T 2862-2020
|
|
YD/T 2863-2020
|
(LTE / WCDMA / GSM (GPRS) multi-mode dual-card dual-standby terminal equipment test method)
|
YD/T 2863-2020
|
|
YD/T 3132.3-2020
|
(Fibre-entry equipment for household installation Part 3: Cable ducts and trunking accessories)
|
YD/T 3132.3-2020
|
|
YD/T 3320.3-2020
|
(Temperature control equipment for telecommunication high heat density machine rooms. Part 3: Overhead air conditioners)
|
YD/T 3320.3-2020
|
|
YD/T 3357.4-2020
|
(100Gb / s QSFP28 optical transceiver module Part 4: 4 × 25Gb / s PSM4)
|
YD/T 3357.4-2020
|
|
YD/T 3357.5-2020
|
(100Gb / s QSFP28 optical transceiver module part 5: 4 × 25Gb / s ER4 Lite)
|
YD/T 3357.5-2020
|
|
YD/T 3420.3-2020
|
(Virtualization of broadband customer gateways based on public telecommunications networks. Part 3: Technical requirements for physical home gateways)
|
YD/T 3420.3-2020
|
|
YD/T 3420.7-2020
|
(Broadband customer gateway virtualization based on public telecommunications network. Part 7: Management requirements)
|
YD/T 3420.7-2020
|
|
YD/T 3538.3-2020
|
(400Gb / s intensity modulation pluggable optical transceiver unity part 3: 4 × 100Gb / s)
|
YD/T 3538.3-2020
|
|
YD/T 3568.1-2020
|
(Technical requirements for communication base station infrastructure Part 1: General)
|
YD/T 3568.1-2020
|
|
YD/T 3568.2-2020
|
(Technical requirements for communication base station infrastructure Part 2: Power supply system)
|
YD/T 3568.2-2020
|
|
YD/T 3568.4-2020
|
(Technical requirements for communication base station infrastructure Part 4: Monitoring system)
|
YD/T 3568.4-2020
|
|
YD/T 3578-2020
|
(Technical requirements for home base station equipment of TD-LTE digital cellular mobile communication network)
|
YD/T 3578-2020
|
|
YD/T 3629-2020
|
(LTE-based vehicle networking wireless communication technology Base station equipment test method)
|
YD/T 3629-2020
|
|
YD/T 3630-2020
|
(Technical requirements for terminal equipment of LTE digital cellular mobile communication network (second stage))
|
YD/T 3630-2020
|
|
YD/T 3631-2020
|
(TD-LTE digital cellular mobile communication network technical requirements for base station equipment (third stage))
|
YD/T 3631-2020
|
|
YD/T 3632-2020
|
(LTE FDD Digital Cellular Mobile Communication Network Base Station Equipment Technical Requirements (Phase 3))
|
YD/T 3632-2020
|
|
YD/T 3633-2020
|
(TD-LTE digital cellular mobile communication network repeater technical requirements and test methods)
|
YD/T 3633-2020
|
|
YD/T 3634-2020
|
(LTE FDD digital cellular mobile communication network repeater technical requirements and test methods)
|
YD/T 3634-2020
|
|
YD/T 3635-2020
|
(Technical requirements for baseband feeding digital distribution system equipment)
|
YD/T 3635-2020
|
|
YD/T 3636-2020
|
(Baseband feeding digital distribution system equipment testing method)
|
YD/T 3636-2020
|
|
YD/T 3637-2020
|
(Technical requirements for radio frequency feeding digital distribution system equipment)
|
YD/T 3637-2020
|
|
YD/T 3638-2020
|
(Radio frequency feeding digital distribution system equipment testing method)
|
YD/T 3638-2020
|
|
YD/T 3639-2020
|
(Mitigation measures for interference from wireless devices to wired terminals and cables used in broadband customer networks)
|
YD/T 3639-2020
|
|
YD/T 3640-2020
|
(Security Strategy of Personal Mobile Intelligent Terminal in Enterprise Application)
|
YD/T 3640-2020
|