|
Std ID |
Description (Standard Title) |
Detail |
|
JB/T 3164-2007
|
Technical specification for roller flot leveller
|
JB/T 3164-2007
|
|
JB/T 3165-1999
|
Thermodynamic performance test for centrifugal and axial blower and compressor
|
JB/T 3165-1999
|
|
JB/T 3166-1999
|
S-type double-sided dismountable holding down clip
|
JB/T 3166-1999
|
|
JB/T 3168.1-1999
|
Alloy powder for welding. Technical condition
|
JB/T 3168.1-1999
|
|
JB/T 3168.2-1999
|
Alloy powder for welding. Determination of hardness and particle size
|
JB/T 3168.2-1999
|
|
JB/T 3168.3-1999
|
Alloy powder for welding. Chemical analysis methods
|
JB/T 3168.3-1999
|
|
JB/T 3172-1999
|
Phenolic resin cellulose paper-base laminated tube
|
JB/T 3172-1999
|
|
JB/T 3176.1-2010
|
Table band sawing machines. Part 1: Parameters
|
JB/T 3176.1-2010
|
|
JB/T 3176.2-2014
|
Table bandsawing machines. Part 2: Technical conditions
|
JB/T 3176.2-2014
|
|
JB/T 3176-1993
|
Cabinetwork band saw machine parameters
|
JB/T 3176-1993
|
|
JB/T 3178.1-2010
|
Band sawing machines with carriage. Part 1: Parameters
|
JB/T 3178.1-2010
|
|
JB/T 3178.2-2014
|
Band sawing machines with carriage. Part 2: Accuracy
|
JB/T 3178.2-2014
|
|
JB/T 3178.3-2014
|
Band sawing machines with carrlage. Part 3: Technical conditions
|
JB/T 3178.3-2014
|
|
JB/T 3178-1993
|
Woodworking bank saw and carriage parameters
|
JB/T 3178-1993
|
|
JB/T 3185.1-1999
|
Middle and small sized three-roll plate bending machine Technical conditions
|
JB/T 3185.1-1999
|
|
JB/T 3185.1-2014
|
Three roller plate bending machine. Part 1: Types and parameter
|
JB/T 3185.1-2014
|
|
JB/T 3185.2-2014
|
Three roller plate bending machine. Part 2: Technical requirements
|
JB/T 3185.2-2014
|
|
JB/T 3185.3-2014
|
Three roller plate bending machine. Part 3: Accuracy
|
JB/T 3185.3-2014
|
|
JB/T 3191-1999
|
Specification for boiler drum internals
|
JB/T 3191-1999
|
|
JB/T 3192.1-1999
|
Spiral bevel gear milling machine parameters
|
JB/T 3192.1-1999
|
|
JB/T 3192.1-2013
|
Spiral bevel gear milling machines. Part 1: Types and parameters
|
JB/T 3192.1-2013
|
|
JB/T 3192.2-1999
|
Spiral bevel gear milling machine Accuracy inspection
|
JB/T 3192.2-1999
|
|
JB/T 3192.3-2006
|
Spiral bevel gear milling machines. Part3: Specifications
|
JB/T 3192.3-2006
|
|
JB/T 3192-1993
|
(Spiral bevel gear milling machine. Technical conditions)
|
JB/T 3192-1993
|
|
JB/T 3193.1-1999
|
Gear shaping machine parameters
|
JB/T 3193.1-1999
|
|
JB/T 3193.1-2013
|
Gear shaping machines. Part 1: Types and parameters
|
JB/T 3193.1-2013
|
|
JB/T 3193.2-1999
|
(Slotting machine. Series type spectrum)
|
JB/T 3193.2-1999
|
|
JB/T 3193.3-2006
|
Gear shaping machines. Part 3: Specifications
|
JB/T 3193.3-2006
|
|
JB/T 3193-1992
|
(Slotting machine. Technical conditions)
|
JB/T 3193-1992
|
|
JB/T 3199-1994
|
Water lubricating wear-resisting material of thermosetting plastics
|
JB/T 3199-1994
|
|
JB/T 3200-1997
|
(The outer surface of the drum filter vacuum filter)
|
JB/T 3200-1997
|
|
JB/T 3200-2008
|
Rotary-drum vacuum filter
|
JB/T 3200-2008
|
|
JB/T 3206-1999
|
Test method for accelerated dew corrosion of rust preventive oils and greases
|
JB/T 3206-1999
|
|
JB/T 3207-1991
|
(Machine Tool Accessories Product packaging technology)
|
JB/T 3207-1991
|
|
JB/T 3207-2005
|
Machine tool accessory. General specification for products packaging
|
JB/T 3207-2005
|
|
JB/T 3208-1999
|
Numerical control of machines. Punched tape formats-coding os preparatory functions G and miscellaneous functions M
|
JB/T 3208-1999
|
|
JB/T 3215-1984
|
Power station automation device Method for designing types of products
|
JB/T 3215-1984
|
|
JB/T 3223-1996
|
Rules of quality management of welding materials
|
JB/T 3223-1996
|
|
JB/T 3227-1999
|
High precision gear hob General technical conditions
|
JB/T 3227-1999
|
|
JB/T 3227-2013
|
The general technical specifications for precision gear hobs
|
JB/T 3227-2013
|
|
JB/T 3228-1999
|
Closed mechanical press Distribution types and dimensions of grooves for fastening molds and of holes drilled on post bar
|
JB/T 3228-1999
|
|
JB/T 3228-2014
|
Straight-side Press - Layout and Size of Pin Holes and Slots for Clamping Die
|
JB/T 3228-2014
|
|
JB/T 3232-1994
|
(Needle bearing universal joints)
|
JB/T 3232-1994
|
|
JB/T 3232-2006
|
Rolling bearings. Needle roller bearings for universal joints
|
JB/T 3232-2006
|
|
JB/T 3232-2017
|
Rolling bearings. Needle roller bearings for universal joints
|
JB/T 3232-2017
|
|
JB/T 3233-1999
|
Artificial diamond sintered body for drilling
|
JB/T 3233-1999
|
|
JB/T 3233-2012
|
Superabrasive. Polycrystalline diamond for drill bit
|
JB/T 3233-2012
|
|
JB/T 3234-1999
|
for dies
|
JB/T 3234-1999
|
|
JB/T 3234-2012
|
Superabrasive. Ployctystalline diamond die blanks for wire drawing
|
JB/T 3234-2012
|
|
JB/T 3235-1999
|
Measurement method for artificial diamond sintered body abrasion ratio
|
JB/T 3235-1999
|
|
JB/T 3235-2013
|
Testing method for abrasion ratio of polycrystalline diamond
|
JB/T 3235-2013
|
|
JB/T 3236-1992
|
Testing Method for Abrasion Ratio of Polycrystalline Diamond
|
JB/T 3236-1992
|
|
JB/T 3236-2007
|
Diamond truing pen
|
JB/T 3236-2007
|
|
JB/T 3237-1991
|
(Leverage card rules)
|
JB/T 3237-1991
|
|
JB/T 3237-2007
|
Indication snap gauge
|
JB/T 3237-2007
|
|
JB/T 3238-1999
|
Imaging level meter
|
JB/T 3238-1999
|
|
JB/T 3240-1999
|
Metal forming machine Visualized symbols of operation instruction
|
JB/T 3240-1999
|
|
JB/T 3241-1991
|
(SWP-type split bearing cross shaft universal coupling)
|
JB/T 3241-1991
|
|
JB/T 3241-2005
|
SWP universal coupling with spider and split bearing eye
|
JB/T 3241-2005
|
|
JB/T 3242-1993
|
SWZ type integrated bearing base crossing-axle universal coupling
|
JB/T 3242-1993
|
|
JB/T 3244-1999
|
Reach trucks. Basic parameters
|
JB/T 3244-1999
|
|
JB/T 3244-2005
|
Battery reach trucks
|
JB/T 3244-2005
|
|
JB/T 3247-1991
|
(Mining locomotives. General technical requirements)
|
JB/T 3247-1991
|
|
JB/T 3248-1991
|
(Mining locomotive test methods and inspection rules)
|
JB/T 3248-1991
|
|
JB/T 3249-1991
|
Engineering machinery Fender and hood
|
JB/T 3249-1991
|
|
JB/T 3259-1991
|
(Closed glow plugs. Type Dimensions)
|
JB/T 3259-1991
|
|
JB/T 3260-1999
|
The type and basic parameter of LTG series hot metal ladle
|
JB/T 3260-1999
|
|
JB/T 3260-2013
|
The type and basic parameter of LT series hot metal ladle
|
JB/T 3260-2013
|
|
JB/T 3261-1999
|
The type and basic parameter of LG series ladle
|
JB/T 3261-1999
|
|
JB/T 3261-2013
|
The type and basic parameter of LG series ladle
|
JB/T 3261-2013
|
|
JB/T 3262-1983
|
(Chinese Industry Standard)
|
JB/T 3262-1983
|
|
JB/T 3263-1983
|
(Chinese Industry Standard)
|
JB/T 3263-1983
|
|
JB/T 3263-2000
|
Horizontal vibrating centrifuge
|
JB/T 3263-2000
|
|
JB/T 3264-1993
|
(Simple pendulum jaw crusher)
|
JB/T 3264-1993
|
|
JB/T 3264-2002
|
Double toggle jaw crusher
|
JB/T 3264-2002
|
|
JB/T 3264-2015
|
Double toggle jaw crusher
|
JB/T 3264-2015
|
|
JB/T 3265-1983
|
(Coal use Jig technical conditions)
|
JB/T 3265-1983
|
|
JB/T 3266-2015
|
Rotary drum dryer
|
JB/T 3266-2015
|
|
JB/T 3267-1991
|
Brake shoe for narrow gauge industrial and mining electric motor
|
JB/T 3267-1991
|
|
JB/T 3267-2014
|
Brake-shoe used in narrow-gauge mining electric locomotive
|
JB/T 3267-2014
|
|
JB/T 3270-1991
|
Main circuit contact, serial size, specification of narrow gauge industrial and mining electric locomotive
|
JB/T 3270-1991
|
|
JB/T 3271-1983
|
(Chain grate technical conditions)
|
JB/T 3271-1983
|
|
JB/T 3271-2002
|
Specification for travelling grate stokers
|
JB/T 3271-2002
|
|
JB/T 3274-1993
|
Coal impact crusher
|
JB/T 3274-1993
|
|
JB/T 3274-2017
|
Impact crusher for coal
|
JB/T 3274-2017
|
|
JB/T 3275-1983
|
(Chinese Industry Standard)
|
JB/T 3275-1983
|
|
JB/T 3275-2001
|
Sector plastic plate for disc-type filter
|
JB/T 3275-2001
|
|
JB/T 3275-2010
|
Sector plate for disk-type vacuum filter
|
JB/T 3275-2010
|
|
JB/T 3276-1999
|
Belt-folded passing over roller discharge filters
|
JB/T 3276-1999
|
|
JB/T 3276-2010
|
Belt-folded passing over roller discharge filters
|
JB/T 3276-2010
|
|
JB/T 3277-1991
|
(Mine hoist and mine hoist hydraulic station)
|
JB/T 3277-1991
|
|
JB/T 3277-2004
|
Hydraulic station for mine hoists and mine hoisting winches
|
JB/T 3277-2004
|
|
JB/T 3277-2017
|
Mine hoists and mine hoisting winches. Hydraulic station
|
JB/T 3277-2017
|
|
JB/T 3278-1992
|
Welding slot screen plate
|
JB/T 3278-1992
|
|
JB/T 3278-2015
|
Welded sieve plate with batten
|
JB/T 3278-2015
|
|
JB/T 3279-1991
|
(Complex swing type crushing jaw crusher)
|
JB/T 3279-1991
|
|
JB/T 3279-2005
|
Single toggle fine jaw crusher
|
JB/T 3279-2005
|
|
JB/T 3282-1999
|
Test methods for determining the relative resistance of insulating meterials to breardown by surface discharges
|
JB/T 3282-1999
|
|
JB/T 3283-1983
|
Thyristor alternating current power controller (silicon controlled voltage regulator, power regulator part)
|
JB/T 3283-1983
|
|
JB/T 3283-2010
|
Thyristor a.c.power controllers
|
JB/T 3283-2010
|