|
Std ID |
Description (Standard Title) |
Detail |
|
JB/T 8138.2-1995
|
Test methods for cable accessories. Part 2: Test of load-cycling at constant voltage
|
JB/T 8138.2-1995
|
|
JB/T 8138.3-1995
|
Test methods for cable accessories. Part 3: Partial discharge measurement
|
JB/T 8138.3-1995
|
|
JB/T 8138.4-1995
|
Test methods for cable accessories. Part 4: Tightness test
|
JB/T 8138.4-1995
|
|
JB/T 8138.5-1995
|
Test methods for cable accessories. Part 5: Salt fog test
|
JB/T 8138.5-1995
|
|
JB/T 8138.6-1995
|
Test methods for cable accessories. Part 6: Humidity resistance test
|
JB/T 8138.6-1995
|
|
JB/T 8139-1995
|
(Chinese Industry Standard)
|
JB/T 8139-1995
|
|
JB/T 8139-1999
|
Road vehicles-low voltage cables (wires)
|
JB/T 8139-1999
|
|
JB/T 8142.1-1995
|
Shipboard cables with symmetrical conductors. Shipboard symmetrical communication cables with ethylene propylene rubber insulated conductors, Type DA
|
JB/T 8142.1-1995
|
|
JB/T 8142.2-1995
|
Shipboard cables with symmetrical conductors. Shipboard symmetrical communication cables with polyvinylchloride insulated conductors, Type DA
|
JB/T 8142.2-1995
|
|
JB/T 8143.1-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with polyethelene insulated copper conductor, rated characteristic impedance 50Ω
|
JB/T 8143.1-1995
|
|
JB/T 8143.2-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with PTFE insulated copper conductor, rated charaeteristic impedance 50Ω
|
JB/T 8143.2-1995
|
|
JB/T 8143.3-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with polyethelene in sulated copper conductor, rated characteristic impedance 75Ω
|
JB/T 8143.3-1995
|
|
JB/T 8143.4-1995
|
Shipboard radio-frequency cables Radio-frequency coaxial cables with PTFE insulated coppor clad, Steel conductor rated characteristic impedance 75Ω
|
JB/T 8143.4-1995
|
|
JB/T 8144.1-1995
|
Fittings for power supply cables with rated voltage between 26/35kV and below. Basic technical requirement. General rules
|
JB/T 8144.1-1995
|
|
JB/T 8144.2-1995
|
Fittings for power supply cables with rated voltage between 26/35kV. Basic technical requirement. Cable terminals
|
JB/T 8144.2-1995
|
|
JB/T 8144.3-1995
|
Fittings for power supply cables with rated voltage between 26/35kV. Basic technical requirement. Cable connectors
|
JB/T 8144.3-1995
|
|
JB/T 8145.1-1995
|
Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV. Natural-styrenbutadiene rubber insulated cables (wires) for railway vehicles
|
JB/T 8145.1-1995
|
|
JB 1109-1982
|
(Chinese Industry Standard)
|
JB 1109-1982
|
|
JB/T 8145.3-1995
|
Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV. Ethylene-propylene rubber insulated cables (wires) for railway vehicles
|
JB/T 8145.3-1995
|
|
JB/T 8146-1995
|
Technical requirements for permanent magnetic (magnetically hard) alloy of cast aluminiumnickel-cobalt
|
JB/T 8146-1995
|
|
JB/T 8146-2014
|
Specification for AI-Ni-Co permanent magnetic (magnetically hard) alloys
|
JB/T 8146-2014
|
|
JB/T 8147-1995
|
(Chinese Industry Standard)
|
JB/T 8147-1995
|
|
JB/T 8147-1999
|
Oil basic varnished silk
|
JB/T 8147-1999
|
|
JB/T 8148.1-1999
|
Alkyd varnished glass cloths
|
JB/T 8148.1-1999
|
|
JB/T 8148.2-1999
|
Polyester varnished glass cloths
|
JB/T 8148.2-1999
|
|
JB/T 8148.3-1999
|
Silicone varnished glass cloths
|
JB/T 8148.3-1999
|
|
JB/T 8148-1995
|
(Chinese Industry Standard)
|
JB/T 8148-1995
|
|
JB/T 8149.1-1995
|
(Chinese Industry Standard)
|
JB/T 8149.1-1995
|
|
JB/T 8149.1-2000
|
Phenolic resin cellulose paper-base laminated sheet
|
JB/T 8149.1-2000
|
|
JB/T 8149.2-2000
|
Phenolic cotton cloth laminated sheet
|
JB/T 8149.2-2000
|
|
JB/T 8149.3-1995
|
(Phenolic cloth laminated board)
|
JB/T 8149.3-1995
|
|
JB/T 8149.4-1995
|
(Phenolic glass cloth laminated board)
|
JB/T 8149.4-1995
|
|
JB/T 8149.5-1995
|
(Epoxy glass cloth laminated board)
|
JB/T 8149.5-1995
|
|
JB/T 8150.1-1995
|
(Phenolic laminated paper tube)
|
JB/T 8150.1-1995
|
|
JB/T 8150.2-1995
|
(Chinese Industry Standard)
|
JB/T 8150.2-1995
|
|
JB/T 8150-1999
|
Epoxy laminated glass fabric tube
|
JB/T 8150-1999
|
|
JB/T 8151.1-1995
|
(Chinese Industry Standard)
|
JB/T 8151.1-1995
|
|
JB/T 8151.1-1999
|
Specification for flexible insulating sleeving specification requirements for individual types of sleeving glass textile sleeving with silicone elastomer coating
|
JB/T 8151.1-1999
|
|
JB/T 8151.2-1995
|
(Chinese Industry Standard)
|
JB/T 8151.2-1995
|
|
JB/T 8151.2-1999
|
Specification for flexible insulating sleeving specification requirements for individual types of sleeving glass textile sleeving with PVC based coating
|
JB/T 8151.2-1999
|
|
JB/T 8151.3-1995
|
(Chinese Industry Standard)
|
JB/T 8151.3-1995
|
|
JB/T 8151.3-1999
|
Glass textile sleeving with acrylic based coating
|
JB/T 8151.3-1999
|
|
JB/T 8152-1995
|
(Oily cloth)
|
JB/T 8152-1995
|
|
JB/T 8153.1-1995
|
(Polyester glass cloth)
|
JB/T 8153.1-1995
|
|
JB/T 8153.2-1995
|
(Silicone glass cloth)
|
JB/T 8153.2-1995
|
|
JB/T 8154-1995
|
(Chinese Industry Standard)
|
JB/T 8154-1995
|
|
JB/T 8154-1999
|
Air-arc gouging carbon electrodes
|
JB/T 8154-1999
|
|
JB/T 8154-2006
|
Air-arc gouging carbon electrodes
|
JB/T 8154-2006
|
|
JB/T 8155-2001
|
Experiment methods of operation property of brush
|
JB/T 8155-2001
|
|
JB/T 8156-1995
|
(Chinese Industry Standard)
|
JB/T 8156-1995
|
|
JB/T 8156-1999
|
Definitions and nomenclature for commutators and collector rings
|
JB/T 8156-1999
|
|
JB/T 8156-2013
|
Nomenclature for commutators and slip-rings
|
JB/T 8156-2013
|
|
JB/T 8157-1995
|
(Chinese Industry Standard)
|
JB/T 8157-1995
|
|
JB/T 8157-1999
|
General specification for small power single phase AC series motor
|
JB/T 8157-1999
|
|
JB/T 8157-2016
|
General specification for small-power single phase series motors
|
JB/T 8157-2016
|
|
JB/T 8158-1995
|
(Chinese Industry Standard)
|
JB/T 8158-1995
|
|
JB/T 8158-1999
|
Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V
|
JB/T 8158-1999
|
|
JB/T 8159-1995
|
(Ceiling Capacitance Motor General technical conditions)
|
JB/T 8159-1995
|
|
JB/T 8160-1995
|
CK series sleeve rotor asynchronous tachogenerators
|
JB/T 8160-1995
|
|
JB/T 8160-2016
|
Specification for CK series sleeve rotor asynchronous tachogenerators
|
JB/T 8160-2016
|
|
JB/T 8161-1995
|
S-C series Servo-tachogenerator sets
|
JB/T 8161-1995
|
|
JB/T 8162-1995
|
(Chinese Industry Standard)
|
JB/T 8162-1995
|
|
JB/T 8162-1999
|
General specification for packaging of small control motors and feedback components
|
JB/T 8162-1999
|
|
JB/T 8162-2016
|
Packaging for control mototr. Specification
|
JB/T 8162-2016
|
|
JB/T 8163-1995
|
(Chinese Industry Standard)
|
JB/T 8163-1995
|
|
JB/T 8163-1999
|
Specification for mill auxiliary DC motors
|
JB/T 8163-1999
|
|
JB/T 8163-2011
|
Specification for mill auxiliary DC motors
|
JB/T 8163-2011
|
|
JB/T 8164-1995
|
(Chinese Industry Standard)
|
JB/T 8164-1995
|
|
JB/T 8165-1995
|
(Chinese Industry Standard)
|
JB/T 8165-1995
|
|
JB/T 8165-1999
|
Methods used to designate model of electrical accessories, controls and protectors
|
JB/T 8165-1999
|
|
JB/T 8165-2013
|
Type coding rules for electrical accessories
|
JB/T 8165-2013
|
|
JB/T 8166-1995
|
(Transformer partial discharge measurements)
|
JB/T 8166-1995
|
|
JB/T 8167-1996
|
(Car generator bearings. Technical conditions)
|
JB/T 8167-1996
|
|
JB/T 8167-2006
|
Rolling bearings. Alternator bearings for automotive. Specifications
|
JB/T 8167-2006
|
|
JB/T 8168-1995
|
(Chinese Industry Standard)
|
JB/T 8168-1995
|
|
JB/T 8168-1999
|
Pulse capacitors and direct current capacitors
|
JB/T 8168-1999
|
|
JB/T 8169-1995
|
(Chinese Industry Standard)
|
JB/T 8169-1995
|
|
JB/T 8169-1999
|
Coupling capacitors and capacitor dividers
|
JB/T 8169-1999
|
|
JB/T 8170-1995
|
(Shunt capacitor internal fuses and internal over-pressure separator)
|
JB/T 8170-1995
|
|
JB/T 8171-1995
|
(Chinese Industry Standard)
|
JB/T 8171-1995
|
|
JB/T 8171-1999
|
Under-excitation impedence protection equipment for generator
|
JB/T 8171-1999
|
|
JB/T 8172-1995
|
(Chinese Industry Standard)
|
JB/T 8172-1995
|
|
JB/T 8172-1999
|
Protection equipment of generator stator earthing
|
JB/T 8172-1999
|
|
JB/T 8173-1995
|
(Chinese Industry Standard)
|
JB/T 8173-1995
|
|
JB/T 8173-2000
|
Specification for fault oscillograph panel
|
JB/T 8173-2000
|
|
JB/T 8174-1995
|
(DC motor speed control thyristor power converter)
|
JB/T 8174-1995
|
|
JB/T 8175-1995
|
(Chinese Industry Standard)
|
JB/T 8175-1995
|
|
JB/T 8175-1999
|
Outilne dimensions of extruded best sink for power semiconductor devices
|
JB/T 8175-1999
|
|
JB/T 8176-1995
|
(Chinese Industry Standard)
|
JB/T 8176-1995
|
|
JB/T 8176-1999
|
Steel pins for pin insulators used on overhead power and telegraph lines
|
JB/T 8176-1999
|
|
JB/T 8177-1995
|
(Chinese Industry Standard)
|
JB/T 8177-1995
|
|
JB/T 8177-1999
|
The but dip galvanized coating of metallic parts for insulators general technical specification
|
JB/T 8177-1999
|
|
JB/T 8178-1995
|
(Chinese Industry Standard)
|
JB/T 8178-1995
|
|
JB/T 8178-1999
|
Technical specification of cap for cap and pin insulators
|
JB/T 8178-1999
|
|
JB/T 8179.2-1995
|
(High-voltage lines cross arm porcelain insulators Part II: Dimensions and characteristics)
|
JB/T 8179.2-1995
|
|
JB/T 8179-1999
|
Cross-arm insulators of ceramic material for high voltage overhead lines. Dimensions and characteristics
|
JB/T 8179-1999
|
|
JB/T 8180-1995
|
(AC electrified railway catenary rod porcelain insulators with a tolerance)
|
JB/T 8180-1995
|
|
JB/T 8181-1995
|
(Chinese Industry Standard)
|
JB/T 8181-1995
|
|
JB/T 8181-1999
|
Locking devices for ball and socket couplings of string insulator units
|
JB/T 8181-1999
|
|
JB/T 8182-1995
|
(Chinese Industry Standard)
|
JB/T 8182-1995
|