HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)
Industry Standard: JB, JB/T, JBT
         
JB << ...>> JB
Std ID Description (Standard Title) Detail
JB/T 7626-2013 Testing methods for reverse-blocking triode thyristors JB/T 7626-2013
JB/T 7627-1994 Detail specification for KG5, KG10 and KG200 case-rated turn-off thyristors JB/T 7627-1994
JB/T 7628-1994 (KN Series 100A/60A to 400A/400A case - rated reverse conducting thyristor triode detailed specification) JB/T 7628-1994
JB/T 7629-1994 Specification for design and installation of refractory fiber furnace lining JB/T 7629-1994
JB/T 7630.1-1998 Microglass fiber separator for lead acid storage batteries JB/T 7630.1-1998
JB/T 7630.1-2008 Glass micro-fiber for lead-acid batteries JB/T 7630.1-2008
JB/T 7630.2-1998 Microporous rubber separator for lead acid storage batteries JB/T 7630.2-1998
JB/T 7630.2-2008 Microporous rubber separators for lead-acid batteries JB/T 7630.2-2008
JB/T 7630.3-1998 Sintered polyvinyl chloride separator for lead acid storage batteries JB/T 7630.3-1998
JB/T 7630.3-2008 Sintered polyvinyl chloride separators for lead-acid batteries JB/T 7630.3-2008
JB/T 7630.4-1998 Melt-blown polypropyrene separator for lead storage batteries JB/T 7630.4-1998
JB/T 7630.4-2008 Melt-spray polypropylene separators for lead-acid batteries JB/T 7630.4-2008
JB/T 7630.5-1998 Microporous polyethylene separator for lead acid storage batteries JB/T 7630.5-1998
JB/T 7630.5-2008 Microporous polyethylene separators for lead-acid batteries JB/T 7630.5-2008
JB/T 7630-1994 (Lead-acid batteries ultra-fine glass fiber separator) JB/T 7630-1994
JB/T 7631-1994 Electronic thermo-controllers for transformers JB/T 7631-1994
JB/T 7631-2005 Electronic thermo-controllers for transformers JB/T 7631-2005
JB/T 7632-1994 (Oil-type series reactor core Test Guidelines) JB/T 7632-1994
JB/T 7632-2006 Test guide for series reactors JB/T 7632-2006
JB/T 7633-1994 (Transformer oil cooler with strong spiral plate) JB/T 7633-1994
JB/T 7633-2007 Spiral-type forced-oil and water coolers for transformer JB/T 7633-2007
JB/T 7634-1994 (Low-power motor slot insulation inserting machine) JB/T 7634-1994
JB/T 7634-2004 Statorslot insulation inserting machine JB/T 7634-2004
JB/T 7635-1994 (Battery truck machine test methods) JB/T 7635-1994
JB/T 7636-1994 (Battery handling vehicle type spectrum) JB/T 7636-1994
JB/T 7637-1994 (Large ring coil taping machine technical conditions) JB/T 7637-1994
JB/T 7638-1994 (Humid Tropics secondary circuit with the power system control and protection screen (cabinet/desk) technical requirements) JB/T 7638-1994
JB/T 7638-2002 Specification for control and protection panel (cabinet, desk) of secondary circuit of power system in heat and moisture environment JB/T 7638-2002
JB/T 7639.1-1994 Metal cold stampings for relays and accessories. General technical conditions JB/T 7639.1-1994
JB/T 7639.2-1994 Metal cold stampings for relays and accessories. Tolerance JB/T 7639.2-1994
JB/T 7640-1994 (Double-click the turbine series type spectrum) JB/T 7640-1994
JB/T 7641.1-1994 Specifications for electric drive mining dumper JB/T 7641.1-1994
JB/T 7641.2-1994 Test method for electric drive mining dumper JB/T 7641.2-1994
JB/T 7642.1-1994 (Universal die die holder. Daibing round punch holder) JB/T 7642.1-1994
JB/T 7642.2-1994 (Universal die die holder. Daibing rectangle mold base) JB/T 7642.2-1994
JB/T 7642.3-1994 (A Common die die die holder seat) JB/T 7642.3-1994
JB/T 7642.4-1994 (General. B die die die holder seat) JB/T 7642.4-1994
JB/T 7642.5-1994 (Universal die die holder. Flexural modulus die holder) JB/T 7642.5-1994
JB/T 7642.6-1995 (Die universal mold base - steel mold base) JB/T 7642.6-1995
JB/T 7642.7-1995 (Die universal mold base - mold base) JB/T 7642.7-1995
JB/T 7642.8-1995 (Die universal mold base -C type lower die) JB/T 7642.8-1995
JB/T 7643.1-1994 (Die template rectangular recessed template) JB/T 7643.1-1994
JB/T 7643.1-2008 Stamping die plates. Part 1: Rectangular die plates JB/T 7643.1-2008
JB/T 7643.2-1994 (Die template rectangular fixed plate) JB/T 7643.2-1994
JB/T 7643.2-2008 Stamping die plates. Part 2: Rectangular retaining plates JB/T 7643.2-2008
JB/T 7643.3-1994 (Die template rectangular plate) JB/T 7643.3-1994
JB/T 7643.3-2008 Stamping die plates. Part 3: Rectangular bolster plates JB/T 7643.3-2008
JB/T 7643.4-1994 (Die template concave circular template) JB/T 7643.4-1994
JB/T 7643.4-2008 Stamping die plates. Part 4: Round die plates JB/T 7643.4-2008
JB/T 7643.5-1994 (Die template circular fixing plates) JB/T 7643.5-1994
JB/T 7643.5-2008 Stamping die plates. Part 5: Round retaining plates JB/T 7643.5-2008
JB/T 7643.6-1994 (Die template circular plate) JB/T 7643.6-1994
JB/T 7643.6-2008 Stamping die plates. Part 6: Round bolster plates JB/T 7643.6-2008
JB/T 7644.1-1994 (Single punch die template single punch plate) JB/T 7644.1-1994
JB/T 7644.1-2008 Single punch plates of stamping dies. Part 1: Retaining plates for single punches JB/T 7644.1-2008
JB/T 7644.2-1994 (Single punch die template single punch plate) JB/T 7644.2-1994
JB/T 7644.2-2008 Single punch plates of stamping dies. Part 2: Bolster plates for single punches JB/T 7644.2-2008
JB/T 7644.3-1994 (Single punch die template. Partial loaded single punch plate) JB/T 7644.3-1994
JB/T 7644.3-2008 Single punch plates of stamping dies. Part 3: Retaining plates for side-fixed single punches JB/T 7644.3-2008
JB/T 7644.4-1994 (Single punch die template. Partial loaded single punch plate) JB/T 7644.4-1994
JB/T 7644.4-2008 Single punch plates of stamping dies. Part 4: Bolster plates for side-fixed single punches JB/T 7644.4-2008
JB/T 7644.5-1994 (Single punch die template. Ball Lock single punch plate) JB/T 7644.5-1994
JB/T 7644.5-2008 Single punch plates of stamping dies. Part 5: Retaining plates for ball-locked single punches JB/T 7644.5-2008
JB/T 7644.6-1994 (Single punch die template. Ball Lock single punch plate) JB/T 7644.6-1994
JB/T 7644.6-2008 Single punch plates of stamping dies. Part 6: Bolster plates for ball-locked single punches JB/T 7644.6-2008
JB/T 7644.7-1994 (Single punch die template. Partial ball locking single punch plate) JB/T 7644.7-1994
JB/T 7644.7-2008 Single punch plates of stamping dies. Part 7: Retaining plates for ball-locked side-fixed single punches JB/T 7644.7-2008
JB/T 7644.8-1994 (Single punch die template. Partial single punch ball locking plate) JB/T 7644.8-1994
JB/T 7644.8-2008 Single punch plates of stamping dies. Part 8: Bolster plates for ball-locked side-fixed single punches JB/T 7644.8-2008
JB/T 7645.1-1994 (Small die guide. A guide column) JB/T 7645.1-1994
JB/T 7645.1-2008 Guide units of stamping dies. Part 1: Small guide pillars. Type A JB/T 7645.1-2008
JB/T 7645.2-1994 (B Die guide Small guide column) JB/T 7645.2-1994
JB/T 7645.2-2008 Guide units of stamping dies. Part 2: Small guide pillars. Type B JB/T 7645.2-2008
JB/T 7645.3-1994 (Die guide Small guide sleeve) JB/T 7645.3-1994
JB/T 7645.3-2008 Guide units of stamping dies. Part 3: Small guide bushes JB/T 7645.3-2008
JB/T 7645.4-1994 (Die guide. Plate fixed guide column) JB/T 7645.4-1994
JB/T 7645.4-2008 Single punch plates of stamping dies. Part 8: Bolster plates for ball-locked side-fixed single punches JB/T 7645.4-2008
JB/T 7645.5-1994 (Die guide. Plate fixed bushing) JB/T 7645.5-1994
JB/T 7645.5-2008 Guide units of stamping dies. Part 5: Plate-fixed guide pillars JB/T 7645.5-2008
JB/T 7645.6-1994 (Die guide means. Platen) JB/T 7645.6-1994
JB/T 7645.6-2008 Guide units of stamping dies. Part 6: Clamping plates JB/T 7645.6-2008
JB/T 7645.7-1994 (Die guide. Guide column seat) JB/T 7645.7-1994
JB/T 7645.7-2008 Guide units of stamping dies. Part 7: Guide pillar holders JB/T 7645.7-2008
JB/T 7645.8-1994 (Die guide. Bushing seat) JB/T 7645.8-1994
JB/T 7645.8-2008 Guide units of stamping dies. Part 8: Guide bush holders JB/T 7645.8-2008
JB/T 7646.1-1994 (Shank die. Pressure-molded handle) JB/T 7646.1-1994
JB/T 7646.1-2008 Stamping die shanks. Part 1: Press-fit die shanks JB/T 7646.1-2008
JB/T 7646.2-1994 (Die mold handle. Screw Shank) JB/T 7646.2-1994
JB/T 7646.2-2008 Stamping die shanks. Part 2: Screwed die shanks JB/T 7646.2-2008
JB/T 7646.3-1994 (Die mold handle flange Shank) JB/T 7646.3-1994
JB/T 7646.3-2008 Stamping die shanks. Part 3: Flanged die shanks JB/T 7646.3-2008
JB/T 7646.4-1994 (Shank die. Trough Shank) JB/T 7646.4-1994
JB/T 7646.4-2008 Stamping die shanks. Part 4: Slotted die shanks JB/T 7646.4-2008
JB/T 7646.5-1994 (Die mold handle Floating Shank) JB/T 7646.5-1994
JB/T 7646.5-2008 Stamping die shanks. Part 5: Self-centering die shanks JB/T 7646.5-2008
JB/T 7646.6-1994 (Die mold handle. Push activity Shank) JB/T 7646.6-1994
JB/T 7646.6-2008 Stamping die shanks. Part 6: Pushed-in movable die shanks JB/T 7646.6-2008
JB/T 7646.7-1995 (Die die handle - Universal Shank) JB/T 7646.7-1995
JB/T 7647.1-1994 (Die guide pins are being sold. A Pilot) JB/T 7647.1-1994
JB/T 7647.1-2008 Pilot pins of stamping dies. Part 1: Pilot pins. Type A JB/T 7647.1-2008