|
Std ID |
Description (Standard Title) |
|
JB/T 7056-2008
|
General rules relating of pneumatic fluid power tube fittings
|
|
JB/T 7057-1993
|
(Speed pneumatic fittings. Technical conditions)
|
|
JB/T 7057-2008
|
Rules relating of speed adjusting pneumatic fluid power tube fieetings
|
|
JB/T 7058-1993
|
Joints of quick change pneumatic pipes Technical conditions
|
|
JB/T 7059-1993
|
Guide for preparation of standard for power semiconductor modules
|
|
JB/T 7060-1993
|
KB series two pole thyristors for overvoltage protection
|
|
JB/T 7061-1993
|
Silicon wafers intended to be used in power semiconductor devices
|
|
JB/T 7062-1993
|
Symbol and codes for connection of semiconductor current convertors
|
|
JB/T 7063-1993
|
Rated voltage and current of power semiconductor devices
|
|
JB/T 7064-1993
|
(General technical conditions for semiconductor inverter)
|
|
JB/T 7065-1993
|
Pressure Relief Devices for Transformers
|
|
JB/T 7065-2004
|
Pressure relief devices for transformers
|
|
JB/T 7065-2015
|
Pressure relief device for transformers
|
|
JB/T 7067-1993
|
(Column contact voltage regulator)
|
|
JB/T 7067-2002
|
Column type voltage regulator
|
|
JB/T 7068-1993
|
(Transformers metal expander)
|
|
JB/T 7068-2002
|
Metal expanders for instrument transformer
|
|
JB/T 7068-2015
|
Metal expanders for instrument transformers
|
|
JB/T 7069-1993
|
(Transformer pressure release valve Test Guidelines)
|
|
JB/T 7069-2004
|
Test guide for pressure relief devices for transformers
|
|
JB/T 7070.1-1993
|
(Regulator Test Guidelines first partial contact, contact automatic voltage regulator Test Guidelines)
|
|
JB/T 7070.1-2002
|
Test guide for regulator. Part 1: Test guide for variable regulators and automatic variable regulators
|
|
JB/T 7070.2-1993
|
(The second part of the test pilot and sensor automatic induction regulator Test Guidelines)
|
|
JB/T 7070.2-2002
|
Test guide for regulator. Part 2: Test guide for induction voltage regulators and automatic induction voltage regulators
|
|
JB/T 7070.3-1993
|
(Regulator Test Guidelines Part III Magnetic regulator Test Guidelines)
|
|
JB/T 7070.3-2002
|
Test guide for regulator. Part 3: Test guide for magnetic control voltage regulator
|
|
JB/T 7071-1993
|
(Bulb-type turbine generator basic technical requirements)
|
|
JB/T 7071-2005
|
Basic specification for bulb hydrogenerators
|
|
JB/T 7071-2013
|
Fundamental technical specifications for bulb hydro generators
|
|
JB/T 7072-1993
|
(Turbine governor and hydraulic device series type spectrum)
|
|
JB/T 7072-2004
|
Series table for governors and oil pressure supply units of hydraulic turbines
|
|
JB/T 7073-1993
|
(Simplified requirements of medium and small motor and turbine design)
|
|
JB/T 7073-2006
|
Simplified regulation of drawing for large, middle and small generator and turbine
|
|
JB/T 7074-1993
|
(General technical conditions for gas turbine generator)
|
|
JB/T 7075-1993
|
(YZD lifting series multi-speed three-phase induction motors)
|
|
JB/T 7075-2002
|
Technical specifications for YZD range of multi-speed three-phase induction motors for crane application
|
|
JB/T 7076-1993
|
(YEZS series lifting two-speed cone rotor brake three-phase asynchronous motors for)
|
|
JB/T 7076-2002
|
Technical specification for YEZS range of double-speed conical-rotor brake three-phase induction motors for crane application
|
|
JB/T 7076-2013
|
Specification for YEZS series double-speed conical-rotor braking three-phase induction motors for crane application
|
|
JB/T 7077-1993
|
(YZRE series crane and metallurgical electromagnetic brake three-phase wound rotor induction motors)
|
|
JB/T 7077-2002
|
Technical specifications for YZRE range of electromagnetic braking three-phase slip-ring rotor induction motors for crane and metallurgical applicatio
|
|
JB/T 7077-2014
|
Specification for YZRE series electromagnetic braking wound-rotor three-phase induction motors for crane and metallurgical applications
|
|
JB/T 7078-1993
|
(YZRF, YZRG series crane and metallurgical forced air type wound rotor three-phase induction motors)
|
|
JB/T 7078-2002
|
Technical specifications for YZRG range of forced-ventilated wound-rotor three-phase induction motors for crane and metallurgical application
|
|
JB/T 7078-2014
|
Specifications for YZRF and YZRG series forced-ventilated wound-rotor three-phase induction motors for crane and metallurgical applications
|
|
JB/T 7079-1993
|
(Spring-driven impact test and its correction)
|
|
JB/T 7080-1993
|
Testing instrument for winding inter-turn impulse voltage
|
|
JB/T 7080-2013
|
Impulse voltage tester for winding interturn insulation
|
|
JB/T 7081-1993
|
Model designation method for testing instruments and apparatus
|
|
JB/T 7081-2013
|
Type organization method for electrical special test equipment
|
|
JB/T 7082-1993
|
Dielectric withstand testing instruments for insulating medium
|
|
JB/T 7082-2013
|
Dielectric voltage-withstand tester
|
|
JB/T 7083-1993
|
Impulse voltage testing instruments for low voltage apparatus
|
|
JB/T 7083-2013
|
Impulse-voltage tester for loe-voltage electrical installations
|
|
JB/T 7084-1993
|
(Electric tools stacked core technology guides)
|
|
JB/T 7085.1-1993
|
(Electric tools series motor stator and rotor winding process Guidelines Part I: stator winding process)
|
|
JB/T 7085.2-1993
|
(Electric tools series motor stator and rotor winding process Guidelines Part II: symmetric rotor winding process)
|
|
JB/T 7085.3-1993
|
(Electric tools series motor stator and rotor winding process Guideline III: stator coil winding process)
|
|
JB/T 7085.4-1993
|
(Electric tools series motor stator and rotor winding process guidelines Part IV: single fold rotor winding process)
|
|
JB/T 7085.5-1993
|
(Power tools assembly process guidelines)
|
|
JB/T 7086-1993
|
Guideline for assembly process of electric tools
|
|
JB/T 7086-2013
|
The guide for assembly process of hand-held motor-operated electric tools
|
|
JB/T 7087-1997
|
Switch gears for electric tools
|
|
JB/T 7088-1993
|
Partial discharge detectors
|
|
JB/T 7089-1993
|
High-voltage oscilloscopes for impact test
|
|
JB/T 7090-1993
|
(Waste heat boiler. BOF HRSG)
|
|
JB/T 7091-1993
|
Fibre glass fixed grained casing tube
|
|
JB/T 7092-1993
|
(Silver-based multi-layer electrical contacts basic performance measurement methods)
|
|
JB/T 7092-2008
|
Method for measuring basic properties of bimetal contacts
|
|
JB/T 7093-1993
|
Silicone fiber glass self-extinguishing tubes
|
|
JB/T 7093-2015
|
Flexible insulating sleeving. Self-extinguishing glass textile fiber sleeving coated with silicone resin for electrical purposes
|
|
JB/T 7094-1993
|
Modified polyester impregnating varnish
|
|
JB/T 7095-1993
|
Imine epoxy impregnating varnish
|
|
JB/T 7096-1993
|
(Copper, bismuth, cerium contact material technical conditions)
|
|
JB/T 7097-1993
|
(Bismuth copper aluminum contact material technical conditions)
|
|
JB/T 7097-2008
|
Specification for copper-bismuth-aluminium electric contact material
|
|
JB/T 7098-1993
|
(Copper chromium contact material technical conditions)
|
|
JB/T 7098-2002
|
Technical specification for copper-chromium electrical content
|
|
JB/T 7099-1993
|
Molding rigid mica materials
|
|
JB/T 7100-1993
|
Flexible rigid mica materials
|
|
JB/T 7100-2015
|
Flexible micanite for electrical purpose
|
|
JB/T 7101-1993
|
Metal coating and chemical treatment of relays and their accessories. Classification codes and marking
|
|
JB/T 7102-1993
|
Protection level of casing of relays and their accessories (IP designation)
|
|
JB/T 7103-1993
|
General technical specifications for coils intended to be used in relays and their accessories
|
|
JB/T 7104-1993
|
(Relay Electrical connections and devices General technical conditions)
|
|
JB/T 7104-2007
|
Secondary power system equipment electrical connections General technical conditions
|
|
JB/T 7105-1993
|
(35KV substation (the) sets centralized control protection screen, cabinets, Taiwan general technical conditions)
|
|
JB/T 7105-2002
|
General specification for complex control and protection panel, cabinet, desk of 35kV substation
|
|
JB/T 7106-1993
|
Air plasma arc cutting water injection arc cutters
|
|
JB/T 7108-1993
|
Carbon arc air gouging machines
|
|
JB/T 7109-1993
|
Plasma arc welding machines
|
|
JB/T 7110-1993
|
Electroheat capacitors
|
|
JB/T 7111-1993
|
High voltage shunt capacitors
|
|
JB/T 7112-2000
|
High voltage shunt capacitor of the assembling type
|
|
JB/T 7113-1993
|
Low voltage shunt capacitors
|
|
JB/T 7114.1-2013
|
Rules for determination of the types of power capacitor products. Part 1: Capacitor unit, capacitor of the assembling type and capacitor of tank type
|
|
JB/T 7114-1993
|
(Power Capacitor Model methodology)
|
|
JB/T 7114-2005
|
Rules for determination of the types of power capacitor products
|
|
JB/T 7115-1993
|
Low voltage local compensation unit of reactive power
|
|
JB/T 7115-2011
|
Local reactive power compensation installations for a low-voltage motor
|