|
Std ID |
Description (Standard Title) |
|
GB/T 43145-2023
|
Green manufacturing - Green supply chain management in manufacturing enterprises - Reverse logistics
|
|
GB/T 43146-2023
|
Bevel and hypoid gear geometry
|
|
GB/T 43148-2023
|
Additive manufacturing - Requirements for lightweight structure design
|
|
GB/T 43149-2023
|
Design and metrological characteristics of height gauges
|
|
GB/T 43150-2023
|
Design and metrological characteristics of electronic digital-indicator gauges
|
|
GB/T 43151-2023
|
High-strength bolt assemblies for steel structures of weathering steel
|
|
GB/T 43152-2023
|
Mobile terminal animation and comics content requirements
|
|
GB/T 43153-2023
|
Basic specification for at-home care services of the elderly
|
|
GB/T 43154-2023
|
Geographic information - Storage rules of content model for imagery and gridded data
|
|
GB/T 43155-2023
|
Sustainable cities and communities - Management and implementation guidance for sustainable development of small towns
|
|
GB/T 43156-2023
|
Geographic information - Model and storage specifications for vector data
|
|
GB/T 43157-2023
|
Detection and identification of Phenacoccus solani Ferris
|
|
GB/T 43158-2023
|
Detection and identification of Dickeya solani
|
|
GB/T 43051-2023
|
Laboratory animal - General requirements for biosafety in animal experiment
|
|
GB/T 43052-2023
|
Information exchange specifications between electricity market operation system and electricity retail technical support system
|
|
GB/T 43053-2023
|
Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
|
|
GB/T 43054-2023
|
Railway applications - Lead-acid battery system for traction systems on railway motor trolley
|
|
GB/T 43055-2023
|
General requirements for rural low-voltage safety electricity consumption
|
|
GB/T 43056-2023
|
Technical requirements for photovoltaic power station in desert areas
|
|
GB/T 43057-2023
|
Photovoltaic(PV) modules - Dynamic mechanical load testing
|
|
GB/T 43058-2023
|
Ammonia corrosion testing of photovoltaic(PV)modules
|
|
GB/T 43059-2023
|
Requirements of flatness control for printed boards and printed board assemblies
|
|
GB/T 43060-2023
|
Technical requirement for supply chain e-commerce business collaboration
|
|
GB/T 43061-2023
|
Semiconductor integrated circuits - Test methods of PWM controller
|
|
GB/T 43062-2023
|
Nuclear energy - Determination of neutron fluence and displacement per atom(dpa) in reactor vessel and internals
|
|
GB/T 43063-2023
|
Integrated circuit - Test method for CMOS image sensors
|
|
GB/T 43064.1-2023
|
Guidelines for intelligent plants construction - Part 1: Intelligent systems of physical plants
|
|
GB/T 43070-2023
|
General specification of carton (box) erecting-filling and tucking-in closing machine
|
|
GB/T 43071-2023
|
Unmanned aircraft spray system for plant protection
|
|
GB/T 43072-2023
|
Guidelines for construction and implementation of gas cylinder traceability system
|
|
GB/T 43073-2023
|
Pneumatic fluid power - Test methods for measuring acoustic emission pressure levels of exhaust silencers
|
|
GB/T 43074-2023
|
Springs - Symbols
|
|
GB/T 43076-2023
|
CVD diamond tools - Categorization
|
|
GB/T 43077.4-2023
|
Connections for hydraulic fluid power - Ports and stud ends with general threads - Part 4: Hex plugs
|
|
GB/T 43079.1-2023
|
Specification for selection and matching of steel pipe flanges, gaskets and fasteners - Part 1: PN designated
|
|
GB/T 43079.2-2023
|
Specification for selection and matching of steel pipe flanges, gaskets and fasteners - Part 2: Class designated
|
|
GB/T 43080.3-2023
|
Fans - Efficiency classification for fans - Part 3: Fans without drives at maximum operating speed
|
|
GB/T 43083-2023
|
Self-cleaning coated glass for solar photovoltaic and solar-thermal generation
|
|
GB/T 43084.1-2023
|
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications
|
|
GB/T 43084.2-2023
|
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
|
|
GB/T 43085-2023
|
Plastics - Polymer dispersions - Determination of the content of free formaldehyde
|
|
GB/T 43086-2023
|
Plastics - Polymer dispersions - Determination of sieve residue
|
|
GB/T 43087-2023
|
Microbeam analysis - Analytical electron microscopy - Method for the determination of interface position in the cross-sectional image of the layered materials
|
|
GB/T 43088-2023
|
Microbeam analysis - Analytical electron microscopy - Measurement of the dislocation density in thin metals
|
|
GB/T 43089-2023
|
Electrodialysis device for high-salinity-water concentration
|
|
GB/T 43090-2023
|
Ruthenium (III) chloride
|
|
GB/T 43091-2023
|
Test method for compressive strength of powder
|
|
GB/T 43092-2023
|
Electrochemical performance test of lithium ion battery cathode materials - Test method for high temperature performance
|
|
GB/T 43093-2023
|
Electrochemical performance test of lithium nickel manganese oxide - Test method for the initial discharge specific capacity and initial efficiency
|
|
GB/T 43094-2023
|
Trans-1-chloro-3, 3, 3-trifluoropropene[HCFO-1233zd(E)] for industrial use
|
|
GB/T 43095-2023
|
Wide molybdenum plate
|
|
GB/T 43096-2023
|
Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
|
|
GB/T 43097-2023
|
Statistical methods for heating operation data
|
|
GB/T 43098.1-2023
|
Analysis of water treatment chemicals - Part 1: Determination of phosphorus
|
|
GB/T 43099-2023
|
Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy
|
|
GB/T 43100-2023
|
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings
|
|
GB/T 43101-2023
|
Metallic and other inorganic coatings - Definitions and conventions concerning porosity
|
|
GB/T 43102-2023
|
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
|
|
GB/T 43103-2023
|
Metallic materials - Methods for creep-fatigue damage assessment and life prediction
|
|
GB/T 43104-2023
|
Carbon based films - Classification and designations
|
|
GB/T 43105-2023
|
Seamless steel tubes for hydroformed part
|
|
GB/T 43106-2023
|
Steel wire ropes for deep-sea exploration
|
|
GB/T 43107-2023
|
Seamless stainless steel tubes for instrumentation pressure connecting for nuclear power plants
|
|
GB/T 43108-2023
|
Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
|
|
GB/T 43109-2023
|
Stainless clad plate for ship and ocean engineering
|
|
GB/T 43110-2023
|
Chromium powder for additive manufacturing
|
|
GB/T 43111-2023
|
Carbon materials - Fatigue testing - Axial force-controlled method
|
|
GB/T 43112-2023
|
Metallic materials - Elastic modulus measurement - Rate-jump method
|
|
GB/T 43113-2023
|
Standard practices for evaluating the hydrothermal resistance of carbon fiber reinforced polymer composites
|
|
GB/T 43114-2023
|
Hard carbon
|
|
GB/T 43115-2023
|
Metallic materials - Sheet and strip - Shear test method at room temperature
|
|
GB/T 43116-2023
|
Fibre-reinforced plastic composites - Standard qualification plan(SQP)for composite materials, including reduced qualification plan(RQP)and extended qualification plan(EQP)schemes
|
|
GB/T 43117-2023
|
Glass-reinforced thermosetting plastics(GRP)pipes - Determination of the ring creep properties under wet or dry conditions
|
|
GB/T 43118-2023
|
Corrosion of metals and alloys - Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
|
|
GB/T 43119-2023
|
Technical requirements for construction of closed test site for automatic driving
|
|
GB/T 43120-2023
|
Code of practice of sea trial for manned submersible
|
|
GB/T 43121.1-2023
|
Ships and marine technology - Aquatic nuisance species - Part 1: Ballast water discharge sample port
|
|
GB/T 43122-2023
|
Ships and marine technology - Performance test procedures for LNG fuel gas supply systems (FGSS) for ships
|
|
GB/T 43123-2023
|
Ships and marine technology - Performance test procedures for high-pressure pumps in LNG fuel gas supply systems (FGSS) for ships
|
|
GB/T 43124-2023
|
Ships and marine technology - Marine environment protection - Tanks and piping systems for facilitating 5 ppm oil-water separation
|
|
GB/T 43125-2023
|
Specification for productivity evaluation of shale oil
|
|
GB/T 43126-2023
|
Specification for the geological sweet spot evaluations of shale oil
|
|
GB/T 43127-2023
|
General requirements for structural components and assemblies of space products
|
|
GB/T 43128-2023
|
General technology specification for aerospace thermoplastic polyurethane elastomer intermediate film
|
|
GB/T 43129-2023
|
Assessment method of modern coal mine
|
|
GB/T 43130.1-2023
|
Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 1: General requirements
|
|
GB/T 43131-2023
|
Determination method for magnetic susceptibility of synthetic diamond
|
|
GB/T 43132-2023
|
Super abrasive products - Grinding wheels for computerized numerical control(CNC)grinding of precision cutting tools
|
|
GB/T 43133.1-2023
|
Transport packaging - Reusable plastic distribution boxes - Part 1: General requirements
|
|
GB/T 43134-2023
|
Super abrasive products - Safety requirements
|
|
GB/T 43135-2023
|
Earth-moving machinery - Block handler - Terminology and commercial specifications
|
|
GB/T 43136-2023
|
Super abrasive products - Precision dicing and cutting wheels for semiconductor chips
|
|
GB/T 43137-2023
|
Earth-moving machinery - Hydraulic breakers - Terminology and commercial specifications
|
|
GB/T 43138-2023
|
Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements
|
|
GB/T 43139-2023
|
Density detecting method for vacuum solidified samples of casting aluminum alloys liquid
|
|
GB/T 43140-2023
|
Laser directed energy deposition machines - General technical specification
|
|
GB/T 43141-2023
|
Laser additive manufacturing machines - General technical requirement
|
|
GB/T 43142-2023
|
Surface preparation equipment with ultra-high pressure water jet for ships
|
|
GB/T 43143-2023
|
Non-destructive testing - Acoustic emission testing - Test method for classification of active cracks in concrete structures
|
|
GB/T 43144-2023
|
Non-destructive testing - Acoustic emission testing - Test method for damage qualification of reinforced concrete beams
|