|
Std ID |
Description (Standard Title) |
|
GB/T 37278-2018
|
Requirements for the establishment of pest free places of production and pest free production sites
|
|
GB/T 37279-2018
|
Rules for the quarantine of entry-exit cucurbit seeds -- Pathogenic bacteria
|
|
GB/T 37600.10-2018
|
National central product classification -- Product category core metadata -- Part 10: Sensors
|
|
GB/T 37600.11-2018
|
National central product classification -- Product category core metadata -- Part 11: Magnetic stripe card and integrated circuit card
|
|
GB/T 37600.1-2018
|
National central product classification -- Product category core metadata -- Part 1: Description rules
|
|
GB/T 37600.12-2018
|
National central product classification -- Product category core metadata -- Part 12: Glasses
|
|
GB/T 37600.13-2018
|
National central product classification -- Product category core metadata -- Part 13: Clothing
|
|
GB/T 37600.2-2018
|
National central product classification -- Product category core metadata -- Part 2: Forgings
|
|
GB/T 37600.3-2018
|
National central product classification -- Product category core metadata -- Part 3: Lighting product
|
|
GB/T 37600.6-2018
|
National central product classification -- Product category core metadata -- Part 6: Clock and watch
|
|
GB/T 37600.8-2018
|
National central product classification -- Product category core metadata -- Part 8: LED television set
|
|
GB/T 37600.9-2018
|
National central product classification -- Product category core metadata -- Part 9: Vehicle navigation terminal
|
|
GB/T 398-2018
|
Cotton grey yarn
|
|
GB/T 4059-2018
|
Test method for phosphorus content in polycrystalline silicon by zone-melting method under controlled atmosphere
|
|
GB/T 406-2018
|
Cotton grey fabric
|
|
GB/T 4473-2018
|
Synthetic testing of high-voltage alternating current circuit-breakers
|
|
GB/T 510-2018
|
Determination of solidification point for petroleum products
|
|
GB/T 5170.13-2018
|
Inspection methods for environmental testing equipment -- Part 13: Mechanical vibrating type system for vibration (sinusoidal) test
|
|
GB/T 5170.15-2018
|
Inspection methods for environmental testing equipment -- Part 15: Hydraulic vibrating type system for vibration (sinusoidal) test
|
|
GB/T 5170.16-2018
|
Inspection methods for environmental testing equipment -- Part 16: Centrifugal machines for constant acceleration test
|
|
GB/T 5170.19-2018
|
Inspection methods for environmental testing equipment -- Part 19: Combined temperature vibration (sinusoidal) testing equipment
|
|
GB/T 5173-2018
|
Surface active agents -- Detergents -- Determination of anionic-active matter content -- Direct two-phase titration procedure
|
|
GB/T 5174-2018
|
Surface active agents -- Detergents -- Determination of cationic-active matter content -- Direct two-phase titration procedure
|
|
GB/T 5401-2018
|
Pulp -- Determination of alkali solubility
|
|
GB/T 5585.1-2018
|
Copper or aluminium and its alloy bus bars for electrical purposes -- Part 1: Copper and copper alloy bus bars
|
|
GB/T 5585.2-2018
|
Copper or aluminium and its alloy bus bars for electrical purposes -- Part 2: Aluminium and aluminium alloy bus bars
|
|
GB/T 5705-2018
|
Textiles -- Cotton textile products -- Terminology
|
|
GB/T 5706-2018
|
Textiles -- Wool textile products -- Terminology
|
|
GB/T 5707-2018
|
Textiles -- Bast fibres textile products -- Terminology
|
|
GB/T 5761-2018
|
Suspension polyvinyl chloride resins of general purpose
|
|
GB/T 5836.1-2018
|
Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings
|
|
GB/T 5836.2-2018
|
Unplasticized poly (vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings
|
|
GB/T 6002.16-2018
|
Textile machinery terminology -- Part 16: Ring spinning machines for cotton spinning
|
|
GB/T 6113.105-2018
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-5: Radio disturbance and immunity measuring apparatus -- Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
|
|
GB/T 6113.106-2018
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-6: Radio disturbance and immunity measuring apparatus -- EMC antenna calibration
|
|
GB/T 6113.201-2018
|
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity -- Conducted disturbance measurements
|
|
GB/T 6374-2018
|
Rock drilling machines and pneumatic tools -- Shanks and fitting dimensions of chuck bushings
|
|
GB/T 6809.10-2018
|
Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 10: Ignition systems
|
|
GB/T 6809.11-2018
|
Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 11: Fuel systems
|
|
GB/T 6836-2018
|
Sewing thread
|
|
GB/T 7119-2018
|
Evaluating guide for water saving enterprises
|
|
GB/T 71-2018
|
Slotted set screws with cone point
|
|
GB/T 7190.1-2018
|
Mechanical draft cooling towers -- Part 1: Medium and small open cooling towers
|
|
GB/T 7190.2-2018
|
Mechanical draft cooling towers -- Part 2: Large open cooling towers
|
|
GB/T 7403.1-2018
|
Lead-acid traction batteries -- Part 1: Technical conditions
|
|
GB/T 7403.2-2018
|
Lead-acid traction batteries -- Part 2: Product types and specifications
|
|
GB/T 74-2018
|
Slotted set screws with cup point
|
|
GB/T 742-2018
|
Fibrous raw material, pulp, paper and board -- Determination of residue (ash) on ignition at 575℃ and 900℃
|
|
GB/T 75-2018
|
Slotted set screws with long dog point
|
|
GB/T 7586-2018
|
Earth-moving machinery -- Hydraulic excavators -- Test methods
|
|
GB/T 7784-2018
|
Test methods for power reciprocating pump
|
|
GB/T 786.2-2018
|
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams
|
|
GB/T 8081-2018
|
Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR)
|
|
GB/T 8082-2018
|
Rubber, raw natural -- Technically specified rubber (TSR) -- Packing, marking, storage and transportation
|
|
GB/T 8190.8-2018
|
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
|
|
GB/T 8196-2018
|
Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
|
|
GB/T 83-2018
|
Square set screws with long dog point and rounded end
|
|
GB/T 84-2018
|
Square set screws with cup point
|
|
GB/T 8423.1-2018
|
Petroleum and natural gas industries terminology -- Part 1: Exploration and development
|
|
GB/T 8423.2-2018
|
Petroleum and natural gas industries terminology -- Part 2: Engineering technical
|
|
GB/T 8423.3-2018
|
Petroleum and natural gas industries terminology -- Part 3: Oil-gas surface engineering
|
|
GB/T 8511-2018
|
Vibratory roller
|
|
GB/T 85-2018
|
Square set screws with long dog point
|
|
GB/T 8656-2018
|
Emulsion and solution -- Polymerized styrene-butadiene rubber (SBR) -- Evaluation procedures
|
|
GB/T 8659-2018
|
Butadiene rubber (BR) 9000
|
|
GB/T 8660-2018
|
Solution polymerized butadiene rubber (BR) -- Evaluation procedures
|
|
GB/T 8756-2018
|
Collection of metallographs on defects of germanium crystal
|
|
GB/T 879.1-2018
|
Spring-type straight pins -- Slotted -- Heavy duty
|
|
GB/T 879.2-2018
|
Spring-type straight pins -- Slotted -- Light duty
|
|
GB/T 879.3-2018
|
Spring-type straight pins -- Coiled -- Heavy duty
|
|
GB/T 879.4-2018
|
Spring-type straight pins -- Coiled -- Standard duty
|
|
GB/T 879.5-2018
|
Spring-type straight pins -- Coiled -- Light duty
|
|
GB/T 8903-2018
|
Steel wire ropes for lifts
|
|
GB/T 9074.1-2018
|
Bolt or screw and washer assemblies with plain washers
|
|
GB/T 9764-2018
|
Tyre valve core chambers
|
|
GB/T 9842-2018
|
Specification for urea reactor
|
|
GB/T 50046-2018
|
Standard for anticorrosion design of industrial constructions
|
|
GB/T 50130-2018
|
Technical standard for concrete lift-slab structures
|
|
GB/T 50181-2018
|
Technical standard for buildings in flood plains and flood detention areas
|
|
GB/T 50224-2018
|
Standard for acceptance of construction quality of anticorrosive engineering of buildings
|
|
GB/T 50252-2018
|
Standard for engineering design of cable television networks
|
|
GB/T 50297-2018
|
Standard for basic terms of electric power engineering
|
|
GB/T 50298-2018
|
Standard for scenic and historic area general planning
|
|
GB/T 50299-2018
|
Standard for construction quality acceptance of metro engineering
|
|
GB/T 50337-2018
|
Standard for planning of urban environment sanitation facilities
|
|
GB/T 50357-2018
|
Standard of conservation planning for historic city
|
|
GB/T 50361-2018
|
Technical standard for infills or partitions with timber framework
|
|
GB/T 50374-2018
|
Standard of construction and acceptance for communication conduit engineering
|
|
GB/T 50379-2018
|
Standard for quality management of geotechnical investigation enterprises
|
|
GB/T 50434-2018
|
Standard of soil erosion control for production and construction projects
|
|
GB/T 50491-2018
|
Standard for design of iron ore pelletizing project
|
|
GB/T 50528-2018
|
Standard for design of energy conservation of fired brick and tile plant
|
|
GB/T 50548-2018
|
Standard for investigation and surveying of 330kV～750kV overhead transmission line
|
|
GB/T 50559-2018
|
Standard for design of environmental protection facilities of flat glass plant
|
|
GB/T 51238-2018
|
Technical standard for building foundation in karst area
|
|
GB/T 51240-2018
|
Standard for soil and water conservation monitoring and evaluation of production and construction projects
|
|
GB/T 51288-2018
|
Code for construction and acceptance of inclined shaft freezing at a mine
|
|
GB/T 51290-2018
|
Standard for classification and measurement of construction cost index
|
|
GB/T 51293-2018
|
Technical standard for water supply and drainage system of urban rail transit
|
|
GB/T 51294-2018
|
Standard for scenic and historic area detail planning
|